This is a NG panel with standard "glasscockpit" gauges. Panel was made with FSPanel Studio using original gauges that came with the Superpuma package or using default FS gauges.

This is a replacement panel for the great freeware Cessna c337 Skymaster by Mike Stone. Offers pilot´s and co-pilot´s views. However, it may work as well with other C337s or other twin-prop light aircraft. Uses mainly FS2004 default gauges, necessary freeware gauges are included.

Dual Panel Featuring full functionality and switching from inside the cockpit From Captains Panel to First Officer Panel. Fully functional with FSnet.

This an upgraded and modernized panel for the h6k mavis by Kazanouri Ito. The panel is a first officer bmp by Frank Elfert and the yoke is from a goose v2 panel by Detlev Rohmer, and the guages are from many excellent guage makers who make these panels possible. Included is an upgrade by Bob Chicilo. This upgrade must be installed for the plane to fly right and for the guages to work in the panel.

No additional comments.

This panel has been modified to have everything in sight, except GPS, that, when used, is perfectly integrated with the rest of the panel. It includes some original gauges. They are for 1024 x 768 resolution or higer.

This panel has been modified to have everything in sight, except GPS, that, when used, is perfectly integrated with the rest of the panel. It includes some original gauges. They are for 1024 x 768 resolution or higer.

Very hight quality 737-300 Digital panel for FS2004. New wonderful XML gauges: alt-speed combo, adi2 and many others. Optimized for "FFX/SGA 737-300" model. Real flight dinamics. Pilot friendly cockpit lay out, good for yours ATC flights. Checklists and aircraft charts included.

Very hight quality 737-300 Analog panel for FS2004. New wonderful XML gauges: adi, hsi, radio altimeter, vsi, AP anunciator, alt-speed combo, adi2 and many others. Optimized for "FFX/SGA 737-300" model. Real flight dinamics. Pilot friendly cockpit lay out, good for yours ATC flights. Checklists and aircraft charts included.

Hellenic Airforce TA-7H panel,based on a limited(unfortunately) array of pictures of the actual panel.Most gauges though seem to be at the right position...The panel contains 3 views:Pilot/Pilot look-down/Co-pilot.It has been thoroughly tested in FS2004(but will probably work in previous versions too)

FS2004/FS2002/FS2000 Top Avionics 747-400 v2.0 With new reliable high precision FMS!!! A "glass cockpit" which uses THE RealCRT's Needs Navigation Data v2.0 or higher for ND Map mode and Flight Plan. SHAREWARE (approx 19 USD).

FS2004/FS2002/FS2000 Top Avionics 777-300 v2.0 With new reliable high precision FMS!!! A glass cockpit which uses THE RealCRT's FREE for registered users of TA747-400. Needs Navigation Data v2.0 or higher for ND Map mode and Flight Plan.

Rob Barendregt's Ground Handling Gauges modified to work with PMDG's 737NG family. Rob Barendregt's Ground Handlin Gauges needed, this is only a panel.cfg modification.

The alternative bitmap and panel.cfg file contained in this zip adds a small overhead panel and photographic elements to Ken Mitchell's Dornier Do328 turbo prop panel (do328p_panel.zip - required).

Rework of my Erj 170 panel. Files for use in FS2002 also included.

Panel for the Boeing 747-400. This panel I tried something new, back lighting of all the text like on the real thing. Panel has 2D side views for use with the Meljet and Opensky 747's. There is also a panel.cfg for use with the default 747.

caF86pnl.zip. Photo Tex Pro panel made from actual pictures. It is tested with with Mike Stone's and Rey Lopez's F-86 aircrafts. No need for FSUIPC.

Photo Tex Pro panel made from my own digital pictures. No need for FSUIPC.

PhotoTex Pro series panel from real pictures. It is tested with WinXP, Win98 and FS2002. No need for FSUIPC.

PhotoTex Pro series panel from real pictures. Removable overlay panel with the main gauges for landing and taking off. It is tested with WinXP, Win98 and FS2002. No need for FSUIPC.

Here are some great wing views for the 737-200, I have made the views to work with the 737-200 model by Eric Cantu and Mike Baumann, its a great aircraft with superb wing textures. I use an older panel in mine made by Helio Estrela, which is available under fs2004 panels, look for the (he37-200pnl.zip) archive and begin downloading. These wing views compliment this panel and aircraft in many respects, I would have to say it has been a pleasure making these views for such a magnificent model!

Nav-GPS switch patch for Boeing 737-300 Analog Panel. Fix switch opposite position working.

There are several attractive freeware A340 panels available here in the AVSIM file library, yet most all of them wreak havoc on frame rates. This panel is my answer to that problem, and will probably not appeal to those of you looking for "As real as it gets." Instead, this is a simple, and intuitively easy to use panel using many default gauges in conjunction with more advanced gauges available as freeware. Redistributed here with permission of the original authors. Original Panel Bitmaps: Andreas Jaros at FPDA. NOTE: You MUST have the FS2000 Concorde gauges installed in FS9 for this panel to display correctly. Consult the forums for availability. Follow the instructions in the README file.

Ever wondered what your passengers see when your the captain!. Well step into some 737-800 wing views that show you what its like. These wing views apply to the FlightFX 737-800. A superb aircraft in every respect, well worth the download as is the panel from Targan Unutmaz(tungv1.zip) I have designed these wing views to work with this panel and aircraft.

Here are some great wings views for the Boeing 737-200, the views I have made work with the 737-200 model by (Eric Cantu and Mike Baumann), its a great aircraft and has fantastic wing textures. I use an older panel in mine made by Helio Estrela, which can be found by searching avsim under fs2002 panels, look for the (he37-200pnl.zip) archive and begin downloading. These wing views compliment this panel and aircraft in many respects, I would have to say it has been a pleasure making these views for such a magneficent aircraft and panel!!