FSX/P3D Airbus A380 Mega Pack

I tried downloading the A380 pack and found the aircraft in simobjects folder could you please tell me if this pack works for P3D v5.3, please?

Will this product work in MSFS 20?

Wow, I feel stuck, not having fsx. Can't wait for developers to start producing a great products for MSFS20.

Steam has a community folder where no mods are stored. These are in another folder where other mods have been put in which are also displayed. Didn't find an FSX folder on steam and can't install it. If I pack the files into the order at steam where the working mods are in there, nothing happens with this one. Can somebody help me?

I downloaded the full pack but it's not showing up in my list on P3D V5. Could someone please provide support?

Really great job, downloaded and tested it on the FSX flight simulator, it works amazingly well, thank you from the bottom of my heart, I honestly didn't expect that because I've tried such planes before and it didn't work.

I do not quite understand. Add-on means that you already have the base model, not available in FSX. Or what?

I can't install it, I don't find the way, may someone help me?

Some of the Effects files already exist; is it safe to overwrite them? Might that not change the behavior of other installed aircraft?

This pack is great! I just loaded them in. The liveries are great! Great job!

Anyone have an issue where the throttle backs off to 60-70% and won't go above that? I've done several autopilot takeoffs and it ramps up to 100% then comes down to 65% and won't get enough speed. Also when in the air, it does the same thing.

This is the best A380 addon of all time!

@David Amor

Yes, this pack is completely compatible with the latest and greatest versions of Prepar3D including P3D v5.1.

Finally managed to install it! Amazing work!

Hi! I downloaded the zip but have no idea how to install all the files. Can you please help me?

Not sure what's up, but this doesn't work for me; not in FSX: SE nor in P3Dv5. #2 engine will not start, and only #2 reverser activates. I'm not sure how well it flies or performs otherwise, since having only three out of four functional engines is a deal-breaker for me.

BEST A380 MOD! Very good Virtual Cockpit, flight model, autopilot, views.

Hi guys… Will this work in MSFS 2020?

It says compatible with P3D v5, does this include V5.1?

This thing flys well. I'm a blind flight simmer and have to at least for now use freeware aircraft. It is beautiful to fly. Thanks for creating the models.

How do I open the cargo doors?

Hi. How do i open the cargo doors?

Same here - I put all the folders into SimObjects>Airplanes (FSX), no A380 appears in the airplanes list.

I put all the files where they belong but they don't come up in the FSX aircraft list.

The FMC doesn't seem to be functional and neither is the radio?

The creator of this should have added the New Qantas livery to the A380.

Thanks for giving a pensioner on a limited budget a great deal of pleasure!

I tried downloading FSX Boeing 747 - 400 with FMC controls from this select 10 without success - it's downloaded with Addit. pro and clearly shows that it's downloaded on Addit. pro but does not show up on my Flight Sim X. I am now trying the AirBus 380 with the FMC controls as I want to learn how to use up to date controls with my Flight Sim X package. I am hoping for more success with this one!

Thanks, Peter.

Thanks a lot for the models, they are awesome!

However, it looks like the A380 does not have enough thrust power. I'm playing on FSX Steam Edition and using the wildlife model, and even on the longest runway, with the throttle at 100%, I barely reach 160 knots by the end of the runway. On top of that, when setting the Autothrottle and Airspeed autopilot, the throttle doesn't go further than 90%, which is not enough to climb; as soon as you ask the aircraft to start climbing, speed starts dropping dramatically. Am I the only one having this problem?

The models are excellent, very easy to install, sound, gauges etc common to all. Thank you so much for the effort you've put into these. I've been after some A380's for a while and these have made my week. Thanks again.

Thank you, thank you, thank you, guys for giving an old pensioner on a limited budget so much enjoyment.

Overall, it is a good-looking plane, but the physics seem off.

• I apply no thrust and full speed brakes, but there is no slowing down — I kept going faster and faster.
• I put full flaps at 400 knots and there is no warning, but the plane slows down.
• When I try to land, if I put the nose down by 5 degrees, it speeds the plane up very fast to 400 knots, which makes it impossible to land even with no thrust.

What are gauges? Are they textures, a model, or a panel?

Hi, I think the models are spectacular. Nothing to complain there. However, the choice of compiling I found very unnecessarily complicated and time-consuming.

If you guys would simply place ALL the aircraft under a folder simobjects/airplanes/ Then all the effects in a folder called effects, all the gauges under gauges and all the sounds under sounds. This way one could simply drag all the files DIRECTLY into the main FSX folder.

I understand why you would do it the way you did though as it's easier to install just one or two paints, but for the whole pack with 14 aircraft.... nonono And also if all the folders would have a unified naming pattern if would be a lot simpler to view what is and isn't already installed. E.g Airbus_A380-861_liveryname for EVERY plane.

Of course, these are just the things that made the installment just a little more difficult and slow. I really can't stress how good the aircraft themselves are. Chris Evans, Project Airbus, Thomas Ruth, and all the others really have made one of the most iconic aircrafts available for free with great detail and supreme quality. I couldn't thank them enough.

But flyaway, please fix this nonsense compilement. Thank you.

I can't figure out how to install this pack. What "Subfolders" do they mean? More detail on how to install these would be nice. I really want to fly the A-380. Please help.

Simply wow! Despite the cockpit of the A340 series, the A380 has simply become awesome. You are welcome to watch my full flight video. https://youtu.be/yXzxqQbkvOo

I have downloaded all the planes into FSX folder. But they are not showing up in my plane gallery in the simulator.

Awesome package. Really impressed with all the detail and sounds. However, can seem to find a way to open all doors and cargo. Can open main, and the next door beside it and the 2 top doors either side but not cargo or the rest. Can you help me please and thank you.

Hi, I love the package! just one question how can I use the FMC? Thank you!

It looks amazing but some of the files don't have the gauges files or the sound folder, I installed the only one that I could find that had all the files and it still didn't show up. Is there anything I can maybe try to get it to work?

It has problems with stall, please watch this problem in FSX, all commands work but the attack angle can't be configured, the plane climbs up with a very high attack angle, it can't get enough speed and stall.

What a great A380 package - totally complete. Works in FSX and confirmed - it does also work in my copy of P3Dv4.

It's very good and fun to fly! The sounds are beautiful and the virtual flight deck blew me away. The pack has a few airlines, but overall, it's great to have! The aircraft looks very good and is pretty easy to handle.

The only issue I ran into is that the only thing the altitude hold selector does is send the aircraft down. If you want to descend, the use of the ALT selector, but for climbing and cruise, do it by hand. HDG selector may bug out once or twice, but it works for the most part.

The zip will not open. I just get a blank box when I try to open.