Help with Teamspeak

Guest · Posted: Wed Mar 30, 2005 1:03 am

I just downloaded TS2 and was curious, as I do not have a Mic yet, but I would like to listen, to it. I enter in I.P Addresses and all I get is error messages. What Am I doing wrong Please help I heard ts is good but if all i get is error messages it is a waste. Thank you

jake01 · Trainee Joined: Jan 14, 2004 Posts: 3 Location: England

Hey mate

You need to make sure it is a valid teamspeak server

And that your firewall is switched OFF!!!

Some good TeamSpeak servers include;

64.119.37.62 = WestcoastATC
81.171.14.140 = UKATC
70.85.87.202:8793 = WorldWideATC

Karbonk · Trainee Joined: Apr 03, 2005 Posts: 3

Karbonk · Trainee Joined: Apr 03, 2005 Posts: 3

here is some good info on Teamspeak

TeamSpeak Server:

Service Default Port Location to change
Voice 8767 UDP web-interface (http://server-ip:HTTPServer_Port)
Web-Interface 14534 TCP server.ini: HTTPServer Port=
Tcpquery 51234 TCP server.ini: TCPQueryPort=

To get your server working behind a router / firewall you only need to forward/open port 8767 UDP (not TCP!).

Karbonk · Trainee Joined: Apr 03, 2005 Posts: 3

And the Client part of Teamspeak

TeamSpeak Client:

TeamSpeak Client uses random ports from the whole 1024-65535 range for source port and sends to port 8767 (UDP) unless indicated otherwise.

Note:
The TeamSpeak Client doesn't usually require any configuration of routers or firewalls. Do NOT setup your router to do port-forwarding or similar, as this is only needed when running the server.

	All times are GMT
Page 1 of 1