The TSR-Electronic Checklist allows you to create your own checklists. The Electronic Checklist is a nearly full automatic checklist system that checks all available clear settable positions and settings in the decided checklist. It can be used in the Project Magenta Systems simulators or as a stand-alone program.
In Customer Mode you can create your own needed checklist, up to 20 checklists with 50 points for each
The Electronic Checklist is by key / offset (registered FSUIPC) / control panel settable to VISIBLE / HIDE, so you can switch it to ON / OFF
B737 Mode, Project Magenta Systems is connected.
The pilot needs to set the requested configurations and when the request is fulfilled the next checklist point will be selected by automatic.
B737 Manual Mode, Project Magenta Systems is NOT connected or needed.
The pilot needs to set the requested configurations if available and needs to mark the checklist point as CHECKED; the next checklist point will be selected automaticly.
Customer Mode, it works as a stand-alone application on any PC (Framework 2.0 needed).
You are able to create your own checklists with your own aircraft and features.
- Up to 20 checklists
- Up to 50 checklist points per checklist
- Useable for any aircraft
- Useable e.g. for online flying to create your online-flying checklists, you will never forget your important things to do and your controller will be amazed!
It is easy to use with a lot of options to control and adjust.
- Supported system B737
- Supports customized checklists created (by you) for your needs
- Auto check or manual check selectable
- Auto check, detects Project Magenta Systems (default logic file) and needed FS status information
- Manual check, if no pmSystems is used or in a different configuration.
- Full keyboard control
- Full mouse control
- Offset control via FSUIPC/WideFS
- Separate control panel, installed on a different PC via FSUIPC/WideFS
- Hide / visible status to be visible overlapped of e.g. ND display or another display.
- Resize-able up to 1280 x 1024, position and size is saved.
- Font size, color (white or green) and bold is set-able
- Checklist can be cleared, one or multiple
It contains the following checklists / function for B737
- Receiving cockpit
- Before engine start
- Cleared for engine start
- Engine start
- After engine start
- Before takeoff
- Cleared for takeoff
- After takeoff
- Decent
- Approach
- Landing
- After landing
- Parking
- Termination
- Clear checklist(s), one or more checklist(s) can be cleared
For use with FS2002 / FS2004 / FSX (when placed on FSX screen, only in window mode).
