Fly Away Simulation

FS2004 AFCAD Files

Page 40

Sort by:

Vanuatu AFCAD2

This file will add more parking areas and gates to these two airports in Vanuatu: Port Vila (Bauerfield) Luganville (Santo-Pekoa) This is for use with AFCAD 2.04 or later versions by Lee Swordy and is for FS2004 ONLY, it is intended for use with the default scenery and I can not guarantee that it will work properly with addon scenery. This is not intended to be an accurate representation of the taxiing/parking layout at this airport, however it adds more parking spaces/gates etc....

File size: 3.89 KB | Download hits: 27

EGNH V2

Blackpool Airport, UK, v2. By Andrew Berry. Fixes many problems with my first Blackpool AF2 file, I can only apologize for the mistakes in EGNH V1. Including: Direction used to get to the runway - fixed (before ATC would divert you right round the airport). Runway surface very wobbly (MS's fault, not mine) - fixed, changed to Tarmac (similar color) There seems to be a problem with Bitumus runways. Some taxiways have been deleted for better traffic flow, also added is a new...

File size: 4.1 KB | Download hits: 17

EGNS AFCAD2 File

Ronaldsway Airport, Isle of Man, UK. Logo for Isle of Man Airport. Installation: Easy install, just cut and paste the supplied BGL file into your Flight Simulator 9Addon SceneryScenery folder. ...

File size: 5.54 KB | Download hits: 21

LTAG

Incirlik AFB, Turkey. Adds some military cargo and military combat plane parking spots plus a tower view. By Ismail Hakki Guzel. Overview of Incirlik Air Force Base. Installation: Just put the AF2_LTAG.bgl file into your Flight Simulator 9Addon SceneryScenery folder and start FS! ...

File size: 95.4 KB | Download hits: 32

Netherlands Antilles AFCAD2

This file will add more parking areas and gates to these three airports in the Netherlands Antilles: Bonaire Is. (Flamingo) St. Maarten Is. (Princess Juliana Intl) Curacao Is. (Willemstad/Hato Intl) This is for use with AFCAD 2.04 or later versions by Lee Swordy and is for FS2004 ONLY, it is intended for use with the default scenery and I can not guarantee that it will work properly with addon scenery. This is not intended to be an accurate representation of the taxiing/parking...

File size: 9.9 KB | Download hits: 55

Smith Memorial Airport

Smith Memorial Airport (OA6), Harrisonville, Missouri (MO). Includes enlarged parking ramps and added parking spaces. Also enlarges the turnaround at the south end of the runway. Added vehicle parking lot and road joins to default scenery. By Jeffery Thomas. Overview of Smith Memorial Airport. For installation, just put wherever you put your other AFCADs. I have /Addon Scenery/AFCAD/Scenery myself but to each his own. I will be releasing a flightplan set soon. My second...

File size: 10.77 KB | Download hits: 9

Uruguay AFCAD2

This file will add more parking areas and gates to the following six airports in Uruguay: Maldonado (Capitan Curbelo Intl) Montevideo (Carrasco Intl/Gen. C L Berisso) Colonia (Laguna De Los Patos Intl) Salto (Salto Nueva Hesperides Intl) Durazno (Santa Bernadina Intl) Tacuarembo This is for use with AFCAD 2.04 or later versions by Lee Swordy and is for FS2004 ONLY, it is intended for use with the default scenery and I can not guarantee that it will work properly with addon...

File size: 11.27 KB | Download hits: 33

Ercan Airport AFCAD2 File

Ercan Airport (LCEN), Cyprus. Adds GA parking, four medium gates, and one heavy gate. ILS also installed on runway 29. By Loue Maclennan. My first attempt at an Afcad for 2004. I had downloaded a set of AI flight plans for Cyprus Turkish Airlines and discovered they used Ercan (LCEN) as a base, but FS2004 only had the runways. Have created GA parking, 4 medium gates, and one heavy gate. ILS also installed on Rwy 29. My apologies for not making it look like the real thing but I haven't a...

File size: 3.17 KB | Download hits: 58

LSZH AFCAD2 File

Zurich-Kloten Airport, Switzerland. ...

File size: 11.99 KB | Download hits: 26

Milan Linate Airport

Milan Linate Airport (LIML), Italy. This AFCAD2 is for the default Milan Linate Airport and places gates at their approximate locations, with their real names. Based on Jeppesen SimCharts. All airlines are shown in the correct parking. Taxiway R6 is closed as real. By Tommaso Botta. Logo for Milan Linate Airport. To Install: Place the AF2_LIML file into your Flight Simulator 9Addon SceneryScenery folder. Start up the FS9 and the changes will be present. To...

File size: 5.67 KB | Download hits: 99

LFEB

Dinan Trelivan Airport, France. ...

File size: 1.73 KB | Download hits: 26

PGUM

Guam Agana International Airport, for use with GUAM3.ZIP scenery. By Jesse Elliott. Installation: Extract the BGL file to your Addon Scenery/Scenery folder. Load flightsim and your all set! ...

File size: 6.64 KB | Download hits: 22

SBKP

Viracopos International Airport, Brazil. SBKP is one of the busiest cargo airport in South America. This AFCAD2 has more gates for medium and heavy aircraft. Works good with Ultimate Traffic. By Wagner Antonio Cursino dos Santos. Installation Close your FS2004. Just in case, make a backup of your existing AF2_SBKP.bgl, located in the following folder: Program FilesMicrosoft GamesFlight Simulator 9Addon Sceneryscenery Copy the new AF2_SBKP.blg to the same folder, replacing the old...

File size: 3.73 KB | Download hits: 64

Samoa AFCAD2

This file will add more parking areas to Faleolo Intl, in Apia, Samoa. This is for use with AFCAD 2.04 or later versions by Lee Swordy and is for FS2004 ONLY, it is intended for use with the default scenery and I can not guarantee that it will work properly with addon scenery. This is not intended to be an accurate representation of the taxiing/parking layout at this airport, however it adds more parking spaces/gates etc. This is useful if you're like me and are AI crazy and have a...

File size: 3.2 KB | Download hits: 18

Castlegar Airport

Castlegar Airport (CYCG), British Columbia (BC), Canada. This file replaces the AFCAD2 file uploaded with the Castlegar scenery. It fixes the problem of the ground texture showing through the runway and runway designator numbers. By Vern Opperman. This file replaces the AFCAD2 file uploaded with my Castlegar scenery. It fixes the problem of the ground texture showing through the runway and runway designator numbers being reversed. To install just cut and paste the AF2_CYCG.bgl to where you...

File size: 4.19 KB | Download hits: 29

Bhutan AFCAD2

This file will add more parking areas to Paro airport in the Himalayan kingdom of Bhutan. This is for use with AFCAD 2.04 or later versions by Lee Swordy and is for FS2004 ONLY, it is intended for use with the default scenery and I can not guarantee that it will work properly with addon scenery. This is not intended to be an accurate representation of the taxiing/parking layout at this airport, however it adds more parking spaces/gates etc. This is useful if you're like me and are AI...

File size: 2.86 KB | Download hits: 87

CVN USS George Washington AFCAD2

Aircraft Carrier CVN USS George Washington. An AFCAD2 file so that users of the Flight Deck III add-on from Abacus can go directly to the USS George Washington off Pensacola NAS from within the FS2004 Airports menu. Screenshot of CVN USS George Washington flight deck. To install just unzip to your "Flight Simulator 9" folder. ...

File size: 137.71 KB | Download hits: 124

Greenland AFCAD2

This file will add more parking areas and gates to these six airports in Greenland: Jakobshavn (Ilulissat) Sondre Stromfjord (Kangerlussuaq) Kulusuk Narsarsuaq Godthab (Nuuk) Sisimiut This is for use with AFCAD 2.04 or later versions by Lee Swordy and is for FS2004 ONLY, it is intended for use with the default scenery and I can not guarantee that it will work properly with addon scenery. This is not intended to be an accurate representation of the taxiing/parking layout at...

File size: 11.4 KB | Download hits: 93

Paraguay AFCAD2

This file will add more parking areas and gates to these three airports in Paraguay: Ciudad Del Este (Guarani Intl) Hernadarias (Itaipu Intl) Asuncion (Silvio Pettirossi Intl) This is for use with AFCAD 2.04 or later versions by Lee Swordy and is for FS2004 ONLY, it is intended for use with the default scenery and I can not guarantee that it will work properly with addon scenery. This is not intended to be an accurate representation of the taxiing/parking layout at this airport,...

File size: 6.92 KB | Download hits: 36

Brunei AFCAD2

This file will add more parking areas and gates to Brunei Intl, in Bandar Seri Begawan, Brunei. This is for use with AFCAD 2.04 or later versions by Lee Swordy and is for FS2004 ONLY, it is intended for use with the default scenery and I can not guarantee that it will work properly with addon scenery. This is not intended to be an accurate representation of the taxiing/parking layout at this airport, however it adds more parking spaces/gates etc. This is useful if you're like me and are...

File size: 5.9 KB | Download hits: 45