FSX Section B - Lexington Photoreal Scenery
- Download hits
- Microsoft Flight Simulator X (FSX) including Steam Edition & Prepar3D (P3D)
- File size
- 57.73 MB
- Virus Scan
- Scanned 10 days ago (clean)
- Access to file
- Free (Freeware)
- Content Rating
Lexington Photoreal Scenery. This is high resolution, 1 meter/pixel, terrain scenery for Lexington, KY. Section, B is one of ten that features Keeneland Racetrack and Bluegrass Airport. This photoscenery is for day use only and will work for any season, but shows only the USGS aerial photo data taken in April 2002. The default FSX mesh works well with this photoscenery and no additional mesh for the area needs to be purchased. The 10 sections of scenery, totaling 600 Mb, contains photoreal terrain textures for Lexington, Kentucky, encompassing an area bounded by 14.5 E-W and 17 N-S miles (about 245 square miles). By Jim Jones.
Lexington, Kentucky 1M PhotoReal Version LexFX1Mb
For use with FSX
By: Jim Jones
General Notes and Comments
FSX Configuration Notes
Author's System Specs
GENERAL NOTES AND COMMENTS
This is high resolution, 1Meter/Pixel, terrain scenery for Lexington, Ky for Section B, see details below, that features Keeneland Racetrack and the Bluegrass Airport. Section C was the first upload, and others will follow in time.
Errata: The Section C download referenced some gif, and txt files and names of files in the documentation erroneously as LexXP...., that should have been LexFX.... A thousand pardons!!!!
This photoscenery is for DAY USE ONLY and will work for any season, although the source is from USGS aerial photos taken in April 2002 and shows only that season. The resolution of this scenery is 1 meter/pixel. Photoscenery areas prevent autogen scenery from appearing within the photoscenery area, but autogen will appear outside the photoscenery area. The default FSX mesh works well with this photoscenery and no additional mesh for the area needs to be purchased. I have no plans to create 1M night scenery. Use my 4M night scenery instead if you intend to fly at night. Caution, 1M and 4M scenery are incompatible and should not be active at the same time since they conflict with one another producing unpleasing results. If the 1M scenery is active at night the default FSX night scenery terrain scenery will not show.
The area covered by all 10 downloads is nearly rectangular, with a couple of notches removed and represents all of that area covered in the original photography. All downloads will require about 600Mb of disk space. The corner locations are approximately:
NW Corner: N38 07.57, W84 37.59
NE Corner: N38 08.06, W84 22.20
SW Corner: N37 52.17, W84 37.60
SE Corner: N37 51.83, W84 21.77
The 10 downloads of scenery contains photoreal terrain textures for Lexington, Ky, encompassing an area bounded by 14.5 E-W and 17 N-S miles (about 245 square miles). No new objects have been added and none have been removed. So, misplaced or misligned objects placed in the original FSX scenery remain as is.
Refer to the photo named Lexmap.jpg to see what is included in each download. The following shows a list of the 10 downloads, a brief comment on their contents and the storage requirements for each.
LexFX1Ma I64, I65, Horse farms 72Mb
LexFX1Mb Keenland, Bluegrass Airport, Horse farms 57Mb
LexFX1Mc Lexington city center, University of Kentucky 93Mb
LexFX1Md I64, I75, outskirts of city 45Mb
LexFX1Me New Circle Road (Highway 4), Highway 68 and suburbs 60Mb
LexFX1Mf City south, Highway 4, Lakes 90Mb
LexFX1Mg I75, US 25, Jacobson Park 53Mb
LexFX1Mh Nicholsville 39Mb
LexFX1Mi Farmland 56Mb
LexFX1Mj Farmland, Ky River, I75 37Mb
Places of interest include the center of the City of Lexington, KY, the University of Kentucky Campus, Bluegrass Airport, Keeneland Racetrack, horse farms, lakes, Interstate systems, and the general terrain of Kentucky's bluegrass region.
The textures cover the Kentucky River with the river's natural color. Only a small portion of the river appears in the SouthEast section of the photoreal scenery. Consequently, these textures will not show reflections or other water effects such as wakes by float planes and boats. The lakes have not been processed to act like water, so boats and floatplanes will not provide water effects.
CAUTION, this install procedure is different than that of the intial LexFX1Mc prodedure. You will be instructed to move the files for this section to the initial LexFX1Mc folder. It is recommended that you have downloaded and installed LexFX1Mc first for this procedure to be correct.
Unzip the LexFX1Mb.zip into a temporary folder. This places a few files in the base of that temporary folder plus the subfolders of:
Scenery (contains 4 BGL files)
Note: There is not a Texture folder since the BGL files contain the textures within them.
Copy the LexFX1Mb.gif file into your previously installed main LexFX1Mc folder. (Optional)
Copy the files from the temporary Documentation folder into your LexFX1Mc\Documantation folder. (Optional)
Copy the BGL files from the temporary \scenery folder into your LexFX1Mc\scenery folder. (Mandatory)
The purpose of this is to have all the BGL files in one scenery folder and all the documentation in one folder. This allows having to activate only one scenery folder, which you should have peviously done with the Section C install.
Some FSX configurations are essential for getting the best detail in these photosceneries:
Level of Detail Radius: Large
Scenery Complexity: Extremely dense
Mesh Resolution: 19 M
Texture Resolution: 1 M
Modify or add to your FSX.CFG file as follows:
Adjust other settings to your computer capabilities and your tastes. However the following are some starting suggestions for this scenery:
Mesh Complexity: 60
Ground Shadows: Off
Traffic Road Vehicles: 14%
Ships and Leasures boats both at 15%
FPS is a very important adjustment. If set too high the textures will not appear sharp. Phototextures are usually presented by FSX at startup in its highest resolution. If you go too fast, if the Target FPS is too high, or you do a lot of panning in or out of the A/C the terrain will go to a lower blurry resolution. In time the blurry terrain will improve ahead of your view. If not you need to set your FPS target lower, or fly slower or stop panning your view -- or all of these. The amount of non terrain scenery and panel also has an effect. You may wish to view with no panel at all.
I get the best result using the Trike at low speeds, with an exterior view above and behind, zoomed out and looking almost directly below. That is where FSX seems to generate the highest resoution terrain first.
My computer installation is about 3 years old, slow by recent standards. I must set my FPS to 10 FPS for best results. I recently added RAM to achieve a total of 2Gb, an important improvement for photoscenery.
AUTHOR'S SYSTEM SPECS
Micron P4 2.8GHz 533FSB 512k cache
2 Gb DDR SDRAM
2x120GB ATA-100 IDE Hard Drives (7200 RPM)
128 Mb DDR nVidia Geforce4 TI4600 (BIOS Aperature Set to 128 MB)
Creative Labs Sound Blaster Live!
Original Drivers ( 184.108.40.20677 ) plus stereo drivers
Pioneer DVD-RW DVR-104
Direct X 9.0c
Windows XP with SP1 & SP2
400Gb Seagate USB drive (where I locate my photoscenery)
Microsoft and BAO for providing the flight simulator and their continuing improvement of the software and SDK tools.
To Jasc Paint Shop Pro 7 & 9 creators that provide powerful tools for the creation and manipulation of textures.
To Terraserver and USGS for their photoscenery data.
To Don Starr for his Terrafetcher program to extract Terraserver data for input to USAPhotoMaps.
To Doug Cox for his USAPhotoMaps program to extract Terraserver data and produce BIG jpeg files.
To Scott Gridley for direction to the DGWarp tool to convert from Terraserver UTM projection bitmaps to WGS84 projection in GeoTiff format for input to the FSX SDK Resample program.
This is freeware and is not to be distributed for any monetary gain. Copyrights are those of this author. It would be appreciated if this scenery is installed at other sites that I be informed.
The author of this scenery is not responsible for any problems you may encounter with your system or other files as a result of using the programs provided here.
The archive lexfx1mb.zip has 14 files and directories contained within it.
This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.
|Filename/Directory||File Date||File Size|
|Go to Fly Away Simulation.url||01.22.16||52 B|
Installation of Add-on Aircraft/Scenery
Most of the freeware add-on aircraft and scenery packages in our file library come with easy installation instructions which you can read above in the file description. For further installation help, please see our Knowledge Center for our full range of tutorials or view the README file contained within the download.