FSX RAF Meteor NF11 WD642

This repaint package offers a unique rendition of Armstrong-Whitworth’s Meteor NF11 (registration WD642) as it was seen during its operational assignments. Delivered to the Royal Air Force in late 1951, WD642 entered service with No. 256 Squadron under the 2nd Tactical Air Force at RAF Geilenkirchen, Germany, and ultimately met its end in 1958 at Kirkbride. This repaint by Peter Watkins is intended for Rob Richardson’s freeware base model, which must be obtained separately from the Fly Away Simulation library.

Meteor NF11 WD642 Background

The Meteor NF11 was part of a line of British twin-engine jet night fighters transitioning from earlier piston-engined aircraft. It borrowed many design elements from the T.7 trainer layout (with seating for both pilot and navigator), yet it also integrated key features such as the longer wings of the Meteor F.3 and the refined fuselage and empennage of the F.8. This version stood apart due to its AI Mk 10 air intercept radar (derived from the Westinghouse SCR-720) mounted in an elongated nose section. As a result, 20 mm cannons were relocated into the wings, positioned outboard of the engine nacelles, and extra fuel capacity was managed via a ventral tank and wing drop tanks.

Distinctive Aspects of This Repaint

Historical Markings: The specific markings of WD642 reflect its service with No. 256 Squadron while stationed in Germany.
Authentic Detailing: Intricate camouflage and insignia are depicted to match period photographs and unit references, capturing the Meteor’s appearance during the early 1950s.
Accurate Finish: Careful texturing highlights surface nuances consistent with operational night fighters of the era.

Setup Instructions

1. Extract and transfer the included texture.WD642 folder into your Armstrong Whitworth Meteor NF11 directory inside the “SimObjects/Airplanes” folder of FSX.
2. Add the configuration entry below into your aircraft.cfg file. Replace xx with the next sequential number in your [fltsim] list:

[fltsim.xx]
title=Armstrong Whitworth Meteor NF11 WD642
sim=Armstrong Whitworth Meteor NF11
model=
panel=
sound=
texture=WD642
kb_checklists=AW_Meteor_NF11_check
kb_reference=AW_Meteor_NF11_ref
ui_manufacturer=Armstrong Whitworth
ui_type=Meteor NF11
ui_variation=WD642
ui_typerole="Twin engine jet night fighter"
ui_createdby="RJR"
atc_id=WD642
atc_airline=Air Force
atc_flight_number=293
description=As a night fighter, the Meteor again replaced the Mosquito however it was never more than an interim measure. The Mosquito night fighter had remained in service even though it was largely obsolete. Gloster proposed a night fighter design to meet the Air Ministry specification for the Mosquito replacement, based on the two seater trainer, with the pilot in the front seat and the navigator in the rear. Once accepted however, the work passed to Armstrong Whitworth for both the detail design and production; the first prototype flew on 31 May 1950. Although based on the T.7 twin seater, it used the fuselage and tail of the F.8, and the longer wings of the F.3. An extended nose contained the AI Mk 10 (the 1940s Westinghouse SCR-720) Air Intercept radar. As a consequence the 20 mm cannons were moved into the wings, outboard of the engines. A ventral fuel tank and wing mounted drop tanks completed the Armstrong Whitworth Meteor NF.11.

Notes for Users

This add-on solely provides the repaint. The original Armstrong-Whitworth Meteor NF11 model by Rob Richardson is required and must be downloaded from the Fly Away Simulation repository. Once installed, you can enjoy a historically inspired look that pays homage to WD642’s service life with the Royal Air Force.

Developers and Credits

Rob Richardson

Creator of the freeware base Meteor NF11 model.

Peter Watkins

Artist responsible for this WD642 repaint.

After all these steps, you will be able to load up flying sessions that showcase one of Britain’s pioneering jet night fighters in an authentic livery. Enjoy your flights under various conditions, and experience the Meteor’s unique blend of historical design features and robust performance.

Leave a comment