FS2004 Air Canada Boeing 767-375 GE (NC)

This AI Aardvark aircraft was designed specifically for use as an AI aircraft. As such, the primary design criteria were that it look good sitting at the gate, or as seen when landing from an aircraft waiting to take off. This plane also uses 6 different LOD (levels of detail) models, which means that as the plane gets visually smaller, the model displayed becomes simpler and simpler, thus reducing the drag on your computer. Painted by Shane Strong. Model by Craig Crawley. Paint kit by Boback Shahsafdari and Peter Pavlin. (See also AIC767NU.ZIP).

INSTALLATION:

Just drop the "AIA_767_300_GE_Alitalia" folder into your FS2k/4k aircraft folder. Then assign the aircraft to some flightplans and you're on your way.

If you're not sure how to assign an aircraft to a flightplan, please visit our website and look in the FAQ/ Help section.

FS2002 FDE INSTALLATION:

By default this aircraft is using FS2004 FDE. To use the FS2002 FDE (aircraft.cfg and *.air files), simply back up the FS2004 FDE and put them in a safe place for future FS2004 use; then copy the FS2002 FDE from the supplied zip folder and overwrite the FS2004 FDE in the main aircraft folder. Special thanks goes to Koji (Mr Hiro) Tanaka for the FS2002 FDE.

REFLECTIVE MODEL:

By default this aircraft is using a non-reflective model. If you wish to use the optional reflective model, you will have to change the line in the aircraft.cfg file that reads: "model=no_refl" to "model=reflective"

This will enable the use of a reflective texture, though the texture included with this package does not have a reflective channel, so it will look exactly the same, regardless of which .mdl you are using.

NOTES:

This aircraft was designed specifically for use as an AI aircraft. As such, the primary design criteria were that it look good sitting at the gate, or as seen when landing from an aircraft waiting to take off.

This plane also uses 6 different LOD (levels of detail) models, which means that as the plane gets visually smaller, the model displayed becomes simpler and simpler, thus reducing the drag on your computer.

If you download a GMAX aircraft that is just gorgeous, but really chews up your frame rates when used as AI if several of them appear on the screen at once, the designer probably did not use the LOD feature, so the model is always 20,000 polygons no matter how far away from you it is.

AI FLIGHT DYNAMICS:

FDE's for AI aircraft are somewhat of a compromise. Dynamics that allow beautiful takeoffs often result in planes that will not land or land very badly. AIA fde's are also designed with traffic flow in mind. This means an AIA aircraft is going to touch down very near the end of the runway and quickly exit to make room for the next aircraft. If you want more "float" on landing, you can adjust the cruise lift, parasite drag and induced drag parameters in the aircraft.cfg file.

Complementing Files & Dependencies

This add-on mentions the following files below in its description. It may be dependent on these files in order to function properly. It's possible that this is a repaint and the dependency below is the base package.

You may also need to download the following files:

• aic767nu.zip

Leave a comment