FSX Green And Black Piper Arrow

PreviewThis free repaint package delivers a bold green finish with black accents for the Piper PA-28R-200 Arrow II, originally offered as a payware release and now provided at no cost. Created by Tom Tiedman for Commercial Level Simulations, this texture package integrates seamlessly with the freeware P...

Screenshot 1
Type
Repaint
Download hits
45
Compatibility
Microsoft Flight Simulator X (FSX) including Steam Edition & Prepar3D (P3D)
Filename
piper_arrow_green_and_black.zip
File size
7.33 MB
Virus Scan
Scanned 21 days ago (clean)
Access to file
Free (Freeware)
Content Rating
Everyone

This free repaint package delivers a bold green finish with black accents for the Piper PA-28R-200 Arrow II, originally offered as a payware release and now provided at no cost. Created by Tom Tiedman for Commercial Level Simulations, this texture package integrates seamlessly with the freeware PA-28R-200 base aircraft. It is suited for Microsoft Flight Simulator X and also offers compatibility with Microsoft Flight Simulator 2004. The real-world Piper PA-28R-200 Arrow II, a single-engine, low-wing touring aircraft, typically houses 200 horsepower and features retractable landing gear along with a constant-speed propeller, ensuring efficient cross-country performance.

Visual Enhancements and Unique Aspects

Piper Arrow II Repaint: This repaint depicts a distinctive color scheme—green fused with white, plus striking black accents for added contrast. Pilots seeking a vibrant shift from conventional paint jobs can appreciate the enhanced visual details that stand out against typical Arrow II liveries.

Developer Credits: Commercial Level Simulations engineered the base model, and Tom Tiedman designed this specific repaint. Both names deserve recognition for their collaboration on a stable, well-structured, and visually pleasing add-on.

Screenshot of green and white Piper Arrow with black trim.

Screenshot of green and white Piper Arrow with black trim.

Important Setup Steps

  • Place the folder named "texture.Green and Black" directly into the Commercial Level Simulations Piper Arrow main directory.
  • Locate your aircraft.cfg file. Append the included [fltsim.X] entry below in ascending order alongside your existing texture entries. Make sure to replace the “X” with the succeeding index number, then save the file.
  • Launch your simulator and enjoy navigating with this new finish.

Configuration Data

[fltsim.X]
title=Commercial Level Simulations -- Piper PA-28R-200 Arrow II Green and Black
sim=Piper_PA28R_Arrow
model=
panel=blk
sound=
texture=Green and Black
kb_checklists=Piper_PA28R_Arrow_Chk
kb_reference=
atc_id=N7354Y
ui_typerole="Single Engine Prop"
ui_createdby="Commercial Level Simulations"
ui_manufacturer=Commercial Level Simulations
ui_type=PA-28R-200 Arrow II
ui_variation=Green and Black
description=Commercial Level Simulations\nPiper PA-28R-200 Arrow II\nVersion FSX-2007.1.0\n\nFuel Capacity: 72 gal/182 l\nStall Speed: 53 kts (dirty)\nMax TAS: 145 kts\nCruise TAS: 137 kts (75% power)\nCruise Range: 880 nm/1,630 km (with 45 min reserve)\n\nService Ceiling (100 fpm): 16,200 ft/3,353 m\nRate of Climb: 649 fpm\n\nTakeoff\nGround Roll: 1065 ft\nOver 50ft Obstacle: 1760 ft

Additional Notes

This repaint relies on the base Piper PA-28R-200 Arrow II model, which is freely accessible. The aircraft itself represents a dependable single-engine platform for short to medium hauls, featuring efficient cruise speeds of around 137 knots and adequate range for scenic trips or training sessions. By integrating this green-and-black rendition into your flights, you can explore iconic general aviation procedures in a vibrant style. Both Microsoft Flight Simulator X and Microsoft Flight Simulator 2004 users can benefit from this repaint, though you will need the foundational freeware package, found in the Fly Away Simulation library, before installing the textures.

Images & Screenshots

Screenshot 1

The archive piper_arrow_green_and_black.zip has 21 files and directories contained within it.

File Contents

This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.

Filename/Directory File Date File Size
file_id.diz10.28.11323 B
READ ME and INSTALLATION.txt10.28.112.02 kB
Texture.Green and Black10.28.110 B
clsPIPER_gau_2_L.bmp11.16.071.00 MB
clsPIPER_gau_L.bmp11.21.071.00 MB
PA28_1_L.bmp10.28.101.33 MB
PA28_1_T.bmp10.28.114.00 MB
PA28_2_T.bmp02.09.074.00 MB
PA28_3_T.bmp11.09.074.00 MB
PA28_4_T.bmp11.09.074.00 MB
PA28_5_T.bmp11.09.074.00 MB
PA28_6_T.bmp12.11.074.00 MB
PA28_misc_T.bmp02.05.074.00 MB
PA28_VC_1_T.bmp02.05.074.00 MB
Prop_PA28.bmp02.05.07256.07 kB
thumbnail.jpg10.28.11133.39 kB
Thumbs.db12.11.0756.00 kB
User.bmp02.05.0764.07 kB
thumbnail.jpg10.28.11133.39 kB
flyawaysimulation.txt10.29.13959 B
Go to Fly Away Simulation.url01.22.1652 B
Installation icon.

Installation Instructions

Most of the freeware add-on aircraft and scenery packages in our file library come with easy installation instructions which you can read above in the file description. For further installation help, please see our Flight School for our full range of tutorials or view the README file contained within the download. If in doubt, you may also ask a question or view existing answers in our dedicated Q&A forum.

0 comments

Leave a Response

Leave a comment