FSX / P3D scenery

FSX Suvarnabhumi International Airport Scenery

Suvarnabhumi International Airport (VTBS) for Bangkok gets a refreshed layout for Microsoft Flight Simulator X, adding an optional third runway, improved terminal and parking assignments, updated ILS on the active runways, fuel and ground support traffic, vehicle roads, drainage canals, and cleaner airport surroundings for more realistic operations.

4/5 (3) 18.2k downloads 🔥 Popular 4.3 MB Scanned clean Thailand
Flight Simulator X Prepar3D

Suvarnabhumi International Airport with Emirates A380 at gate.Suvarnabhumi International Airport (VTBS), Bangkok, Thailand, v1.1. Includes third runway, terminal, extra parking, added ILS, support vehicle roads and other enhancements.

This airport update was designed with the latest version of ADE and made only for FS.

Now included is a file with the third runway added which is part of phase 2 which may or may not happen in the near future, also included is a file with the option of the 2 runway operation as it is today, the Terminal constructed from the FSX buildings library, assigned parking with extra parking, ILS added to both runways by ADE, fuel box included, fuel trucks, support vehicle roads added, drainage canals and many other enhancements, airport views are from inside the control tower (when in tower view) please view the readme before installation.

There are 4 BGL files: VTBS_ADE_RS.BGL, VTBS_ADE_RS_rwy3.BGL, VTBS_ADE_CVX.bgl and a VTBS_ADE_OBJ.BGL file.

The VTBS_ADE_RS_rwy3.BGL file is with the third runway added and in full operation, obviously no navaids for it yet.
The VTBS_ADE_RS.BGL file is the two runway option.
Assigned parking is the same in both.
The VTBS_ADE_CVX.bgl file removes the Autogen for the Airport, Terminal, and runways and should always be used.
The VTBS_ADE_OBJ.BGL file is the scenery objects file and should also always be used.
Please make sure this file goes into the correct folder.

To Install:

  1. Take the VTBS_RS_BGL file of your choice and the VTBS_ADE_CVX.bgl file and place them into Flight Simulator X/Addon Scenery/scenery folder.
  2. Take the VTBS_ADE_OBJ.BGL file and place it into Flight Simulator X/Scenery/Global/scenery folder.
  3. Startup the Flight Sim and the changes will be present.

IMPORTANT NOTE: PLEASE ONLY USE ONE VTBS_RS.BGL FILE AT A TIME: i.e: make sure there is only ONE VTBS_RS.BGL FILE and the VTBS_CVX.bgl file in the Addon Scenery/scenery folder at any time, remove/delete any other VTBS.bgl to avoid incorrect parking and other airport conflicts.

To ADD: all you need now is to have flight plans going to this airport and use EditVoicePack to announce the airport and to show Suvarnabhumi Intl in the ATC window.

Acknowledgments:

ADE Utility (freeware) by Jon Masterson.

And my ever enduring wife to put up with the hours spent making these files.

TIP: when at VTBS in tower view: go to your control settings and look for the "View track/pan Toggle" allocate a keyboard keystroke to it (I allocated a button on my controller) this will unlock the user aircraft, then you can use the hat switch to pan 360 degrees around the airport, hitting the keystroke again (in my case a button) will return you to the user aircraft position.

Enjoy and Happy flying.

Developer: Ray Smith.

Ready to download Suvarnabhumi International Airport Scenery?

Free for all simmers · 4.3 MB · Scanned clean

File information

Filename
vtbs_v11_ade_rs_fsx.zip
File size
4.3 MB
Virus scan
Clean (scanned with ClamAV)
Access
Freeware
Content rating
Everyone

Download speed: Free tier is capped at 0.5 Mbps (this file takes approximately 1 min at the cap). PRO members download at full line speed.

How to install this mod

FSX / P3D scenery
  1. Extract the downloaded archive

    Use 7-Zip (free) or WinRAR to extract the ZIP to a temporary folder. Don't install while still zipped — the simulator can't read inside ZIP files.
  2. Place scenery in Addon Scenery

    Create a folder under FSX\Addon Scenery\ containing scenery and texture sub-folders.
  3. Activate in Scenery Library

    In FSX, go to Settings → Scenery Library → Add Area. Higher priority means it overrides lower entries for the same location.
  4. Always read the included readme

    Every mod ships with a readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.

Finding the scenery

Use these coordinates to fly directly to this location once the mod is installed.

FSX / Prepar3D coordinates (or generate a flight plan)
13.69000000,100.75000000
Decimal degrees
13.690000°, 100.750000°
Degrees, minutes, seconds
13° 41' 24.000" N 100° 45' 00.000" E

Launch FSX or Prepar3D and use Flights → Load to open the downloaded .pln file. Your aircraft will be positioned at this location.

What’s inside this archive

The archive vtbs_v11_ade_rs_fsx.zip has 30 files and directories contained within it.

File Contents

This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.

Filename/Directory File Date File Size
ReadMe.txt11.30.103.16 kB
VTBS_ADE_CVX.bgl11.30.102.70 kB
VTBS_ADE_OBJ.BGL11.30.1071.80 kB
VTBS_ADE_RS.BGL11.30.1068.02 kB
VTBS_ADE_RS_rwy3.BGL11.30.1073.52 kB
FSX_vtbs_v1.1_ade_rs11.30.100 B
flyawaysimulation.txt10.29.13959 B
Go to Fly Away Simulation.url01.22.1652 B
Screenshots09.13.190 B
screen-1.jpg09.11.19190.13 kB
screen-10.jpg09.11.19399.23 kB
screen-11.jpg09.11.19217.08 kB
screen-12.jpg09.11.19195.59 kB
screen-13.jpg09.11.19197.97 kB
screen-14.jpg09.11.19213.10 kB
screen-15.jpg09.11.19152.52 kB
screen-16.jpg09.11.19185.87 kB
screen-17.jpg09.11.19247.35 kB
screen-18.jpg09.11.19227.88 kB
screen-19.jpg09.11.19189.90 kB
screen-2.jpg09.11.19191.65 kB
screen-20.jpg09.11.19200.29 kB
screen-21.jpg09.11.19159.59 kB
screen-3.jpg09.11.19213.02 kB
screen-4.jpg09.11.19209.19 kB
screen-5.jpg09.11.19214.44 kB
screen-6.jpg09.11.19204.16 kB
screen-7.jpg09.11.19203.53 kB
screen-8.jpg09.11.19187.71 kB
screen-9.jpg09.11.19246.81 kB

2 comments

Read what other simmers think, or add your own.

Leave a comment
Comments below are opinions of individual posters and don’t always reflect Fly Away Simulation’s views. Every comment is manually moderated before publication.
  1. whaly

    City= Bangkok = a) Suvarnabhumi b) Dongmuang

    There are 2 airports in Bangkok

    Link
  2. Pun

    Sorry i can't find the airport from search in game which name that i should search to find it Thankyou :)

    Link

Leave a comment

Replying to

Used only for your Gravatar avatar — never shown publicly or shared.

Minimum 30 characters 0
Your comment is reviewed by a moderator before publication. Spam, abuse and self-promotion are removed.