FSX / P3D Complete with Base Model

FSX Convair B-36 Peacemaker

Convair B-36H Peacemaker brings the late-series intercontinental bomber to FSX with authentic performance tuning, period-accurate systems touches, and tailored sound for its distinctive six-engine character. It reflects key H-model upgrades such as improved tail-turret radar, service-friendly pressurized radar equipment placement, and the added flight engineer station.

No ratings yet Rate 9.3k downloads since 2012 12.05 MB Scanned clean · Jul 2026 Added
Flight Simulator X Prepar3D
Base model included

The B-36H Peace-Maker was an improved version of the B-36F.

Screenshot of Convair B-36 Peacemaker in flight.

Screenshot of Convair B-36 Peacemaker in flight.

Eighty-three H models were built. Improvements incorporated into the aircraft included a second flight engineer station, relocation of the radar equipment inside the pressurized compartment to allow for in-flight troubleshooting and repair, and an improved AN/APG-41A tail turret defensive fire control radar system. The first flight of a B-36H was on April 5, 1952. By the mid-1950s, 64 H's were modified to Featherweight III specifications. The B-36H (III) was capable of flying 423 mph at 47,000 feet and was the fastest operational B-36 model.

Original model by Kazunori Ito. Sounds by Curt May. Flight and engine dynamics by Douglas E. Trapp.

Ready to download Convair B-36 Peacemaker?

Free for all simmers · 12.05 MB · Scanned clean Jul 2026

File information

Filename
b-36hdet.zip
File size
12.05 MB
Added
Virus scan
Clean ClamAV · Jul 2026
Access
Freeware
Content rating
Everyone

Download speed: Free tier is capped at 0.5 Mbps (this file takes approximately 3 mins at the cap). PRO members download at full line speed.

This is a freeware file — use is subject to our freeware copyright terms. Problem with this file? Report it and we’ll take a look.

How to install this mod

FSX / P3D Complete with Base Model

  1. Extract the downloaded archive

    Use 7-Zip (free) or WinRAR to extract the ZIP to a temporary folder. Don't install while still zipped — the simulator can't read inside ZIP files.

  2. Place files per the readme

    Most FSX add-ons go into one of: SimObjects\Airplanes\, Addon Scenery\, Effects\, or Gauges\.

  3. Always read the included readme

    Every mod ships with a readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.
Still stuck? The readme included with the file is the authoritative source for this specific mod. Visit our Flight School tutorials or ask in our Q&A forum.

What’s inside this archive

The archive b-36hdet.zip has 80 files and directories contained within it.

File Contents

This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.

Filename/Directory File Date File Size
B-36H PeaceMaker01.23.120 B
Aircraft.cfg01.19.1210.63 kB
B-36H.air01.15.1212.49 kB
B36H.JPG01.15.1240.77 kB
Copyright.txt01.23.12792 B
model01.23.120 B
B-36H.mdl01.13.122.59 MB
Model.cfg01.13.1224 B
panel01.23.120 B
Panel.cfg06.12.0832 B
Smoke01.23.120 B
fx_smoke_f6.fx09.28.081.17 kB
Smoke.txt11.02.0958 B
sound01.23.120 B
A_COMB_1.wav01.13.1292.71 kB
A_COMB_2.wav01.13.12120.37 kB
A_COMB_3.wav01.13.1298.55 kB
A_COMB_4.wav01.13.1288.58 kB
A_EFSC.wav01.13.12231.85 kB
A_REVRS.wav01.13.12470.60 kB
B_COMB_3.wav01.13.1298.76 kB
B_COMB_4.wav01.13.1297.81 kB
B_REVRS.wav01.13.12470.60 kB
bnroll.wav01.13.12370.11 kB
bnroll2.wav01.13.12389.67 kB
bnsplas1.wav01.13.12181.02 kB
bnsplas2.wav01.13.12196.21 kB
c4wind4.wav01.13.12548.90 kB
c5wind2.wav01.13.12426.61 kB
d80b.wav01.13.12579.57 kB
d80c.wav01.13.12680.05 kB
d8e.wav01.13.12386.04 kB
d8f.wav01.13.12381.04 kB
d8g.wav01.13.12181.05 kB
d8h.wav01.13.1275.86 kB
d8j.wav01.13.12165.05 kB
d8s.wav01.13.12110.96 kB
d8t.wav01.13.1282.04 kB
d8u.wav01.13.12172.21 kB
d8v.wav01.13.12106.06 kB
d8w.wav01.13.1251.81 kB
d8x.wav01.13.12868.86 kB
dc1a.wav01.13.1263.56 kB
dc3_starter_left.wav01.13.12100.64 kB
dc3_starter_right.wav01.13.12100.64 kB
dc3b.wav01.13.1274.56 kB
dc4a.wav01.13.1280.81 kB
fcmtoucc.wav01.13.1236.50 kB
fcmtoucl.wav01.13.1250.38 kB
fcmtoucr.wav01.13.1245.32 kB
ford_shutdown_center.wav01.13.12631.28 kB
fwind.wav01.13.1231.24 kB
gear.wav01.13.1265.72 kB
hpe4.wav01.13.1259.33 kB
HW_gyro.wav01.13.121.88 MB
Jsplash1.WAV01.13.12336.38 kB
JSPLASH2.wav01.13.12687.08 kB
LHWstart.wav01.13.12141.65 kB
radprop.wav01.13.1268.04 kB
RHWstart.wav01.13.12199.26 kB
Sound.cfg01.13.1214.56 kB
ST_Kan13.wav01.13.12192.34 kB
tmflaps.wav01.13.1251.26 kB
X_A_REVRS.wav01.13.12108.81 kB
X_B_REVRS.wav01.13.12119.31 kB
xford_shutdown_center.wav01.13.12303.04 kB
texture01.23.120 B
Burner.BMP01.13.1248.05 kB
Engine.bmp01.13.12257.05 kB
Fuse85.BMP01.13.12257.05 kB
Fuselage01.bmp01.13.121.00 MB
Parts.bmp01.13.12257.05 kB
PILOT.BMP01.13.12257.05 kB
PILOT85.BMP01.13.12257.05 kB
Prop.bmp01.13.1265.07 kB
thumbnail.JPG01.15.1240.77 kB
Wing.bmp01.13.121.00 MB
Wing85.BMP01.13.121.00 MB
flyawaysimulation.txt10.29.13959 B
Go to Fly Away Simulation.url01.22.1652 B

Rate this add-on

PRO perk

Only PRO members can place votes.

2 comments

Read what other simmers think, or add your own.

Leave a comment
Comments below are opinions of individual posters and don’t always reflect Fly Away Simulation’s views. Every comment is manually moderated before publication.
  1. joestew PRO

    Nice looking model with great features. Got to have a better panel though.

    Link
  2. Greg A

    This plane flies great, and it looks even better, but I am curious as to how one releases the plane located in the belly of the aircraft.

    Link

Leave a comment

Replying to

Used only for your Gravatar avatar — never shown publicly or shared.

Minimum 30 characters 0
Your comment is reviewed by a moderator before publication. Spam, abuse and self-promotion are removed.