FSX / P3D

FSX IRIS Raptor Driver 90FS Flagship

IRIS Raptor Driver 90th Fighter Squadron Flagship repaint brings authentic Elmendorf-Richardson AFB Alaska markings to the Lockheed Martin F-22, including distinctive AK tail codes and squadron artwork. Built as a crisp DDS texture set aligned to the IRIS paintkit, it runs in Microsoft Flight Simulator X and requires the IRIS Raptor Driver payware.

184 downloads 9.3 MB Scanned clean
Flight Simulator X Prepar3D

This add-on provides a detailed repaint for the payware IRIS Raptor Driver, showcasing a 90th Fighter Squadron Flagship paint scheme from Elmendorf-Richardson AFB in Alaska. Created by S. Peterson, this freeware download offers a carefully authored texture package that accurately represents the characteristic markings of the squadron’s flagship aircraft. It is fully compatible with Microsoft Flight Simulator X and requires the original IRIS Raptor Driver payware.

Visual Highlights and Real-World Inspiration

The Lockheed Martin F-22 Raptor remains an iconic fifth-generation stealth fighter, renowned for its agility, twin-engine powerplant, and supermaneuverability. The 90th Fighter Squadron (sometimes referred to as the “Dicemen”) operates out of Joint Base Elmendorf-Richardson in Anchorage, Alaska. This repaint captures the flagship markings that emphasize the squadron’s heritage and role in air superiority. Expect the hallmark "AK" tail codes and stylized graphics that echo real-life references found at the 90th Fighter Squadron.

IRIS Raptor Driver 90FS Flagship parked on tarmac.

Preview of the IRIS Raptor Driver 90FS Flagship parked on the ground at Elmendorf-Richardson AFB.

Texture Package Features

  • .dds-format texture set designed to work seamlessly with the IRIS paintkit.
  • Accurate squadron markings reflecting the flagship identity within the 90th Fighter Squadron.
  • Compatible exclusively with the IRIS Raptor Driver payware, which must be obtained prior to installing these textures.
  • Works within Microsoft Flight Simulator X thanks to the add-on’s native support and IRIS modeling.

Installation Steps

  1. Locate your IRIS Raptor Driver installation folder. Then move the included “texture.Ak090” directory into that location.
  2. Open the aircraft.cfg file inside the IRIS Raptor Driver folder and place the following entry, adjusting the “xx” to match the next available fltsim index number:
[fltsim.xx]
title=F-22 Raptor - 90th Fighter Squadron Flagship
sim=Raptor
model=
panel=
sound=
texture=AK090
checklists=
ui_manufacturer=Lockheed Martin
ui_type=F-22 Raptor
ui_variation=AK-090
ui_typerole=Twin Engine Jet
ui_createdby=IRIS Flight Simulation Software
visual_damage=0
atc_parking_types=
description=The Lockheed Martin F-22 Raptor is a single-seat, twin-engine fifth-generation supermaneuverable fighter aircraft that uses stealth technology. It was designed primarily as an air superiority fighter, but has additional capabilities that include ground attack, electronic warfare, and signals intelligence roles.
atc_heavy=0
atc_id=090
atc_airline=RAPTOR
atc_flight_number=090

Upon completion, you will have access to the 90th Fighter Squadron Flagship paint scheme for your IRIS Raptor model, allowing you to experience authentic Alaskan-based operations in your simulator. Enjoy flying with the distinctive markings and immerse yourself fully in the spirit of the 90th Fighter Squadron’s rich aviation legacy. Credit goes to S. Peterson for crafting this texture set.

Ready to download IRIS Raptor Driver 90FS Flagship?

Free for all simmers · 9.3 MB · Scanned clean

File information

Filename
ak090.zip
File size
9.3 MB
Virus scan
Clean (scanned with ClamAV)
Access
Freeware
Content rating
Everyone

Download speed: Free tier is capped at 0.5 Mbps (this file takes approximately 3 mins at the cap). PRO members download at full line speed.

How to install this mod

FSX / P3D add-on
  1. Extract the downloaded archive

    Use 7-Zip (free) or WinRAR to extract the ZIP to a temporary folder. Don't install while still zipped — the simulator can't read inside ZIP files.
  2. Place files per the readme

    Most FSX add-ons go into one of: SimObjects\Airplanes\, Addon Scenery\, Effects\, or Gauges\.
  3. Always read the included readme

    Every mod ships with a readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.

What’s inside this archive

The archive ak090.zip has 25 files and directories contained within it.

File Contents

This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.

Filename/Directory File Date File Size
AK09012.22.140 B
Add to aircraft.cfg.txt12.22.141.10 kB
AK090.gif12.22.1468.66 kB
AK090.jpg12.22.1471.62 kB
FILE_ID.DIZ.txt12.22.14167 B
Texture.AK09012.22.140 B
3OG.jpg12.20.1443.45 kB
90FS.jpg12.20.1489.95 kB
F22_1_S.dds11.19.132.00 MB
F22_1_T.dds11.19.132.00 MB
F22_2_S.dds11.19.132.00 MB
F22_2_T.dds12.22.144.00 MB
F22_3_T.dds11.19.132.00 MB
F22_4_S.dds11.19.132.00 MB
F22_4_T.dds12.22.144.00 MB
F22_5_S.dds11.19.132.00 MB
F22_5_T.dds12.22.144.00 MB
F22_7_T.dds11.19.13256.12 kB
F22_8_T.dds11.19.13256.12 kB
F22_9_T.dds11.19.13128.12 kB
PILOT_T.dds06.04.14512.12 kB
texture.cfg11.19.13156 B
thumbnail.jpg12.22.1492.10 kB
flyawaysimulation.txt10.29.13959 B
Go to Fly Away Simulation.url01.22.1652 B

0 comments

Leave a Response

Leave a comment