FSX / P3D scenery

FSX Old Bridge Airport (3N6) Scenery

Old Bridge Airport (3N6) scenery recreates the New Jersey public airstrip with satellite-placed hangars, parking, fuel point, and lighted wind indicator, plus nearby Raceway Park for recognizable VFR landmarks in FSX. It requires several object libraries and pairs well with MegaScenery Earth New Jersey/Delaware to keep apron coverage minimal and match the underlying imagery.

141 downloads 1.61 MB Scanned clean

United States of America

Flight Simulator X Prepar3D

Old Bridge Airport (3N6), New Jersey (NJ). Located 5 miles south of Old Bridge, New Jersey on 120 acres of land, Old Bridge Airport is a public airstrip. Fuel is available by stopping next to the tank north of the parking area. This airport has hangars for transient aircraft - two hangars next to the parking area are open for parking. You can also start in them by selecting one of the dock parking options. Immediately adjacent to the airport is Raceway Park, which features a drag strip, road course, dirt bike course, and karting/motoX areas. Trees are summertime only. By Drew Sikora.

Scenery constructed with use of satellite images/streetview, the author has not been there in person.

This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 001. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Airport Remarks:

- Fuel Available: 100LL (blue)
- Wind Indicator: Yes, Lighted
- NO TOUCH & GO

Installation:

Unzip the folder 3N6 to wherever you stash your add-on scenery, then activate within the FSX scenery library.

When layering in your scenery library, this airport file MUST be layered ON TOP of MegaScenery Earth layers. If you do not do this, you will get floating runways in areas with hills and mountains depending on how detailed your terrain mesh is.

This airport uses the following external scenery objects:
EZ Scenery Objects
RWY 12 Objects
OZx Libraries 1.0
ezhousz.zip
hclib1.zip
jrbcntnr.zip
GA Hangars SS V3
fs9_custom_objects_ss_1_v2.zip

The scenery libraries above ARE REQUIRED to get the full effect of the scenery.

NOTE: the airport AD2 file in the main airport directory is the Airport Design Editor file for anyone that wants to further tweak the airport.

Known Issues:

- parking is designed so AI aircraft will only spawn in the row of 5 single parking stalls perpindicular to the taxiway.
- AI Piper Cubs have difficulty taxiing due to their bad turn radius. They make it to the runway, but meander a lot along the way.
- the parking lot cars completely disappear when the view is panned around.

There is no reason installation of this scenery should harm your computer. I will not be held responsible for any damage occured to your computer as result of installing this scenery. Use at your own risk.

Ready to download Old Bridge Airport (3N6) Scenery?

Free for all simmers · 1.61 MB · Scanned clean

File information

Filename

3n6.zip

File size

1.61 MB

Virus scan

Clean (scanned with ClamAV)

Access

Freeware

Content rating

Everyone

Download speed: Free tier is capped at 0.5 Mbps. PRO members download at full line speed.

This is a freeware file — use is subject to our freeware copyright terms.

How to install this mod

FSX / P3D scenery

Extract the downloaded archive

Use 7-Zip (free) or WinRAR to extract the ZIP to a temporary folder. Don't install while still zipped — the simulator can't read inside ZIP files.
Place scenery in Addon Scenery

Create a folder under FSX\Addon Scenery\ containing scenery and texture sub-folders.
Activate in Scenery Library

In FSX, go to Settings → Scenery Library → Add Area. Higher priority means it overrides lower entries for the same location.
Always read the included readme

Every mod ships with a readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.

Finding the scenery

Use these coordinates to fly directly to this location once the mod is installed.

FSX / Prepar3D coordinates (or generate a flight plan)

40.32970000,-74.34640000

Decimal degrees

40.329700°, -74.346400°

Degrees, minutes, seconds

40° 19' 46.920" N 74° 20' 47.040" W

Launch FSX or Prepar3D and use Flights → Load to open the downloaded .pln file. Your aircraft will be positioned at this location.

What’s inside this archive

The archive 3n6.zip has 8 files and directories contained within it.

File Contents

This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.

Filename/Directory	File Date	File Size
3N6	11.22.10	0 B
3N6_ADEX_DS.ad2	11.22.10	1.68 MB
Scenery	11.22.10	0 B
3N6_ADEX_DS.BGL	11.22.10	145.88 kB
3N6_ADEX_DS_CVX.bgl	11.22.10	1.53 kB
ReadMe.txt	11.22.10	3.67 kB
flyawaysimulation.txt	10.29.13	959 B
Go to Fly Away Simulation.url	01.22.16	52 B