FSX / P3D panel / gauge

FSX Royal Netherlands Navy Bell UH-1C Panel Fix

Royal Netherlands Navy Bell UH-1C panel fix restores correct virtual cockpit panel assignments for René Spaan’s Marine Corps liveries on the Nemeth/Milviz Huey in FSX, removing the missing Captain Sim Weapons Package reference that can trigger errors. It keeps the armed variants and historical squadron paint schemes selectable with clean, standard panel entries.

5/5 (1) 1.3k downloads 2.09 MB Scanned clean
Flight Simulator X Prepar3D

Royal Netherlands Navy Bell UH-1C Panel Fix. Panel update for Nemeth/Milviz Bell UH-1C in Royal Netherlands Navy (Marines) liveries. Previous file has a reference for the CS Weapons Package and will cause problems if you do not have this package installed. This file includes a simple fix. By Rene Spaan.

Royal Netherlands Navy Bell UH-1C in flight.

Royal Netherlands Navy Bell UH-1C in flight.

Nemeth Design Bell UH-1C Royal Netherlands Marine Corps liveries by René Spaan.

---------------------------------
Credits:
Nemeth/Milviz for their magnificent Bell UH-1C for FSX
Royal Netherlands Navy (Marines) liveries by René Spaan

---------------------------------
Disclaimer:
You need a legal, payware copy of the Nemeth Design Bell UH-1C/H package for FSX in order to use these repaints.

---------------------------------
Important:
The previous upload (ND_UH-1C_RNLN.zip) has a panel reference for those who have the Captain Sim Weapon Package installed.
Below procedure will set panels to normal if you don't have this payware package.
Sorry for the inconveniance.

---------------------------------
Update:

If you have problems with panel assignments, just follow the below procedure:

1) Open the aircraft.cfg file in the ND_uh1c folder with a text editor. Copy the the text-lines below in this document and paste them in the aircraft livery part in the aircraft.cfg document.
Replace the number in the [fltsim.X]-lines with the next number in sequence. Save the aircraft.cfg document.
(If you have the ND_UH-1C_RNLN.zip package already installed, just overwrite the previously added lines for this package in your aircraft.cfg with the lines below. You can also manually remove the addition after"panel=" which reads "csweapons" in each section. It will have the same effect.).

[fltsim.X]
title=Bell UH-1C Huey M23 RNLN BIAK
sim=bell_uh1
model=1
panel=
sound=
texture=RNLN
kb_checklists=
kb_reference=
atc_id=001
ui_manufacturer="Bell"
ui_type=Armed UH-1C
ui_variation="RNLN UH-1C with MG's, VSQ4, Biak AB, Dutch New Guinea, 1962"
ui_typerole="Rotorcraft"
ui_createdby="Nemeth Designs & MILVIZ"
description=""
panel_old=1

[fltsim.X]
title=Bell UH-1C Huey M21 RNLN BIAK
sim=bell_uh1
model=
panel=
sound=
texture=RNLN2
kb_checklists=
kb_reference=
atc_id=001
ui_manufacturer="Bell"
ui_type=Armed UH-1C
ui_variation="RNLN UH-1C with MG & FFAR, VSQ4, Biak AB, Dutch New Guinea, 1962"
ui_typerole="Rotorcraft"
ui_createdby="Nemeth Designs & MILVIZ"
description=""
panel_old=

[fltsim.X]
title=Bell UH-1C Huey M21 RNLN HATO
sim=bell_uh1
model=
panel=
sound=
texture=RNLN1
kb_checklists=
kb_reference=
atc_id=001
ui_manufacturer="Bell"
ui_type=Armed UH-1C
ui_variation="RNLN UH-1C with MG & FFAR, VSQ3, HATO AB, Curacao, 1965"
ui_typerole="Rotorcraft"
ui_createdby="Nemeth Designs & MILVIZ"
description=""
panel_old=

[fltsim.X]
title=Bell UH-1C Huey RNLN HATO
sim=bell_uh1
model=2
panel=
sound=
texture=RNLN3
kb_checklists=
kb_reference=
atc_id=001
ui_manufacturer="Bell"
ui_type=Armed UH-1C
ui_variation="RNLN UH-1C, VSQ3, HATO AB, Curacao, 1965"
ui_typerole="Rotorcraft"
ui_createdby="Nemeth Designs & MILVIZ"
description=""
panel_old=

[fltsim.X]
title=Bell UH-1C Huey M23 RNLN Zandery
sim=bell_uh1
model=1
panel=
sound=
texture=RNLN4
kb_checklists=
kb_reference=
atc_id=001
ui_manufacturer="Bell"
ui_type=Armed UH-1C
ui_variation="RNLN UH-1C with MG's, VSQ6, Zandery, Dutch Surinam, 1969"
ui_typerole="Rotorcraft"
ui_createdby="Nemeth Designs & MILVIZ"
description=""
panel_old=1

[fltsim.X]
title=Bell UH-1C Huey M21 RNLN Valkenburg
sim=bell_uh1
model=
panel=
sound=
texture=RNLN5
kb_checklists=
kb_reference=
atc_id=247
ui_manufacturer="Bell"
ui_type=Armed UH-1C
ui_variation="RNLN UH-1C with MG & FFAR, VSQ4, Marine Corps, Valkenburg NAS, 1971"
ui_typerole="Rotorcraft"
ui_createdby="Nemeth Designs & MILVIZ"
description=""
panel_old=

[fltsim.X]
title=Bell UH-1C Huey M23 RNLN Valkenburg
sim=bell_uh1
model=1
panel=
sound=
texture=RNLN6
kb_checklists=
kb_reference=
atc_id=251
ui_manufacturer="Bell"
ui_type=Armed UH-1C
ui_variation="RNLN UH-1C with MG, VSQ4, Marine Corps, Valkenburg NAS, 1972"
ui_typerole="Rotorcraft"
ui_createdby="Nemeth Designs & MILVIZ"
description=""
panel_old=1

[fltsim.X]
title=Bell UH-1C Huey M21 RNLN Valkenburg 244
sim=bell_uh1
model=
panel=
sound=
texture=RNLN7
kb_checklists=
kb_reference=
atc_id=244
ui_manufacturer="Bell"
ui_type=Armed UH-1C
ui_variation="RNLN UH-1C with MG & FFAR, VSQ4, Marine Corps, Valkenburg NAS, 1972"
ui_typerole="Rotorcraft"
ui_createdby="Nemeth Designs & MILVIZ"
description=""
panel_old=

---------------------------------
That's it, enjoy.

Royal Netherlands Navy Bell UH-1C in flight.

Royal Netherlands Navy Bell UH-1C in flight.

Ready to download Royal Netherlands Navy Bell UH-1C Panel Fix?

Free for all simmers · 2.09 MB · Scanned clean

File information

Filename
nd_uh-1c_rnln_panel_update.zip
File size
2.09 MB
Virus scan
Clean (scanned with ClamAV)
Access
Freeware
Content rating
Everyone

Download speed: Free tier is capped at 0.5 Mbps. PRO members download at full line speed.

How to install this mod

FSX / P3D panel / gauge
  1. Extract the downloaded archive

    Use 7-Zip (free) or WinRAR to extract the ZIP to a temporary folder. Don't install while still zipped — the simulator can't read inside ZIP files.
  2. Place panel files

    Panel files go inside FSX\SimObjects\Airplanes\{aircraft}\panel\. Back up the existing panel folder first.
  3. Always read the included readme

    Every mod ships with a readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.

What’s inside this archive

The archive nd_uh-1c_rnln_panel_update.zip has 9 files and directories contained within it.

File Contents

This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.

Filename/Directory File Date File Size
Readme.txt06.05.114.62 kB
UH-1C_1.jpg06.04.11477.16 kB
UH-1C_2.jpg06.04.11554.34 kB
UH-1C_3.jpg06.04.11408.49 kB
UH-1C_4.jpg06.04.11342.54 kB
UH-1C_5.jpg06.04.11504.60 kB
UH-1C_small.png06.04.1119.44 kB
flyawaysimulation.txt10.29.13959 B
Go to Fly Away Simulation.url01.22.1652 B

0 comments

Be the first to leave a comment on this download.

Leave a comment

No comments yet

Be the first to share your thoughts on this download.

Leave a comment

Replying to

Used only for your Gravatar avatar — never shown publicly or shared.

Minimum 30 characters 0
Your comment is reviewed by a moderator before publication. Spam, abuse and self-promotion are removed.