FSX Scenery
Harrisburg International
Harrisburg International Airport (KMDT), Harrisburg, Pennsylvania (PA). Inclu…
Harrisburg International Airport KMDT gets a 2010-spec refresh in Microsoft Flight Simulator X, updating terminal gates and assignments, taxiway designations, runway markings and lighting, and approach data. The package also adds improved parking for cargo, general aviation, and military traffic, plus a new control tower view, beacon placement, vehicles, and apron spot lighting that requires included Jim Dhaenens light files.
Scenery Harrisburg International Airport (KMDT), Pennsylvania (PA). A modification to the stock FSX airport. All updates per May 2010 airport specifications. Gate assignments per the official Web site. By Kambiz Agazi.

Harrisburg International Airport Scenery.
Harrisburg International Airport - KMDT 2010 v1.
IMPORTANT: In order to see the Terminal and apron spot lighting you'll need to install the wonderful lights from Jim Dhaenens. I'm including his light files with this package.
To install Jim's lights, place the lightobj.bgl file in your:
...\Microsoft Flight Simulator X\Scenery\Global\scenery folder -
and almwht.dds and lights1.dds files in:
...\Microsoft Flight Simulator X\Scenery\Global\Texture folder -
KMDT represents a modification to the stock FSX airport. Airport specifications have been updated using information from Virtual Earth, Airnav and the official Web page. Enhancements include new and/or updated Terminal gates; Terminal gate assignments; approach information (transitions/missed); cargo, general aviation and military parking; airport facilities and vehicles; water tower; runway marking and lighting including new approach lights for Rwy 13; apron spot lighting; new Control Tower with Tower view; taxiway designation and pavement type; relocated airport green-white beacon; and additional vehicle paths and fuel trucks.
Installation: The preferred method is to create a folder called KMDT with a scenery subfolder. Place the three KMDT bgl files in the scenery subfolder. You will need to activate the KMDT folder once in FSX. I suggest placing it at or near the top of the scenery priority list - above ALL regional, state or national scenery including UTX USA.
CREDITS: KMDT was updated using the powerful airport design utility by Jon Masterson (ADE9X V1.47.7).
The approach code was updated using official approach plates and ADE9x V1.47.7. A special thanks to Jim Vile who is a member of the ADE team and is the author of the approach code module of ADE. The approach code updates would not have been possible without Jim's KIAD approach tutorial and help.
Lights by Jim Dhaenens provide an excellent set of apron lights. Special thanks to Jim for allowing the use of his lights in freeware packages.
*At KMDT commuter airline parking assignments can be complicated due to several small regional commuter carriers serving more than one major airline at the same airport. For example, MESA (ASH) serves both US Airways Express and United Express. If the ICAO code of ASH is used exclusively, it would be possible for USAX and UALX AI (operated by MESA) to park in the same spot/location.
To avoid this from happening, I suggest using the convention of an "X" following the ICAO of the major airline in the appropriate location of the aircraft.cfg file. For example, USAX = US Airways express. The MESA airline paint representing USAX would be coded (in the aircraft.cfg) for both USAX and ASH (atc_parking_codes=USAX,ASH). Most AI packages do this automatically but it's worth a check. In the KMDT airport scenery file I have not coded any duplicate regional carriers but rather I've used the convention when conflicts arise.
To the extent that there was a unique ICAO code for a particular regional commuter serving a single major airline I included its ICAO in the parking assignment along with the convention mentioned above. For example, PSA Airlines, JIA, provides exclusive service under the US Airways Express name at KMDT. Therefore, JIA is coded along with USAX.
Below are examples of regional carriers at KMDT and the parking codes used in this scenery. Where there is an "and" the "X" convention code must be present in the aircraft.cfg file to ensure that the AI will park at the appropriate gate.
Regional Commuter Airline Served Parking Code
PSA Airlines US Airways Express JIA or USAX
Mesa Airlines US Airways Express USAX and ASH
Piedmont Airlines US Airways Express PDT or USAX
GoJet Airlines United Express GJS or UALX
Mesa Airlines United Express UALX and ASH
Trans States Airlines United Express LOF or UALX
Atlantic Southeast Delta Connection ASQ or DALX
Freedom Airlines Delta Connection FRL or DALX
Pinnacle Airlines Delta Connection FLG or DALX
CommutAir Continental Connection UCA or COAX
American Eagle American Eagle EGF or AALX
Air Georgian Air Canada GGN or ACA
Wiggins Airways FedEx Feeder WIG or FDX
Other airlines serving KMDT include: AirTran Airways (TRS), US Airways (USA), United Airlines (UAL), Delta Airlines (DAL), FedEx Express (FDX), United Parcel Service (UPS), ABX Air (ABX) and the Pennsylvania Air National Guard.
In addition to the parking codes, it is important that each AI contain the correct FSX parking radius to help direct them to the correct/assigned parking ramps/gates.
Free for all simmers · 579.64 KB · Scanned clean
Download speed: Free tier is capped at 0.5 Mbps. PRO members download at full line speed.
FSX\Addon Scenery\ containing scenery and texture sub-folders.readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.Use these coordinates to fly directly to this location once the mod is installed.
40.19322200,-76.76340300
Launch FSX or Prepar3D and use Flights → Load to open the downloaded .pln file. Your aircraft will be positioned at this location.
The archive kmdt2010.zip has 10 files and directories contained within it.
This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.
| Filename/Directory | File Date | File Size |
|---|---|---|
| KMDT_KA_CVX.bgl | 06.16.10 | 431 B |
| KMDT_KA_OBJ.BGL | 06.16.10 | 19.57 kB |
| KMDT_KA.BGL | 06.16.10 | 28.91 kB |
| almwht.dds | 09.04.09 | 64.12 kB |
| lightobj.bgl | 09.04.09 | 643.63 kB |
| lights1.dds | 09.04.09 | 32.12 kB |
| KMDT README.txt | 06.16.10 | 5.01 kB |
| KMDT 1.gif | 06.11.10 | 187.26 kB |
| flyawaysimulation.txt | 10.29.13 | 959 B |
| Go to Fly Away Simulation.url | 01.22.16 | 52 B |
More FSX & P3D add-ons hand-picked based on this download.
FSX Scenery
Harrisburg International Airport (KMDT), Harrisburg, Pennsylvania (PA). Inclu…
FSX Scenery
Princess Juliana International Airport (TNCM) in Saint Marteen, Netherlands A…
FSX Scenery
Barbados International Airport (TBPB). Grantley Adams International Airport f…
FSX Scenery
Dubai International Airport (OMDB), Dubai. Includes a new passenger terminal …
FSX Scenery
Soekarno-Hatta International Airport (WIII), Jakarta, Indonesia. An update to…
FSX Scenery
San Diego International Airport, California (CA), USA. This photoreal scenery…
FSX Scenery
Suvarnabhumi International Airport (VTBS), Bangkok, Thailand, v1.1. Includes …
FSX Scenery
Scenery Miami International Airport (KMIA), Florida (FL). Includes updated ta…
Read what other simmers think, or add your own.
Downloaded KMDT airport scenery. No tower shows, only the cab. What am I doing wrong? Help please.
FSX Harrisburg International Airport Scenery