FSX / P3D AFCAD file

AFCAD File For SAEZ

Ezeiza International Airport (SAEZ) gets a sharper FSX default airport layout built in Airport Design Editor, with optional crosswind operations for simultaneous runway use or standard behavior. It expands terminals A and B, refines assigned parking with added stands, increases fuel and service vehicles, rebuilds support roads, and enhances tower-view airport perspectives.

5/5 (1) 4.4k downloads 135.73 KB Scanned clean

Argentina

Flight Simulator X Prepar3D

Images & Screenshots

1 total

A large airport terminal complex is shown from above, with multiple parked commercial aircraft and surrounding taxiways, roads, and parking lots.

Ezeiza International Airport, Buenos Aires, Argentina. This airport was designed with the latest version of ADE (Airport Design Editor) and made only for the FSX default airport. One version with the crosswind runway operating where both runways will be used for takeoff/landing and one version as the default runway operation. Extensions added to terminals A an B, assigned parking with extra parking, extra fuel trucks, support vehicle roads rebuilt and many other improvements. Airport views are from the roof of the control tower (when in tower view). By Ray Smith.

Aerial photograph of Ezeiza International Airport.

There are 3 BGL files: SAEZ_ADE_RS.BGL, SAEZ_ADE_CW_RS.BGL and a SAEZ_ADE_OBJ.BGL file.

Runway Operation Files:

The SAEZ_ADE_CW_RS.BGL file is with the Xwind runway activated where both runways will be used simultaneously.
The SAEZ_ADE_RS.BGL file is the same as the default runway operation.

Assigned parking is the same in both files.

To Install:

Take the SAEZ_RS.BGL runway operation file of your choice (only one) and place this file into: Flight Simulator X/Addon Scenery/scenery folder
Take the SAEZ_ADE_OBJ.BGL file and place this file into: Flight Simulator X/Scenery/Global/scenery folder.
Start up the Flight Sim and the changes will be present.

IMPORTANT NOTE: PLEASE ONLY USE ONE RUNWAY OPERATION FILE AT ANY TIME. Make sure there is only ONE of the SAEZ_RS.BGL FILES in the Addon Scenery/scenery folder at any time, remove/delete any other SAEZ.bgl to avoid incorrect parking and other airport conflicts.
If you have any AI Traffic Addons please make sure they have "NOT" installed another AFCAD for this airport as this will also cause a conflict.
PLEASE NOTE: When using ATIS with the SAEZ_ADE_CW_RS.BGL file you will hear the fake runways as well as the airport runways, this is the method used in activating non parallel runways and should be ignored or if preferred use the version SAEZ_ADE_RS.BGL.

Uninstall:

Delete/remove the BGL files and the default airport will then be active.

Enjoy and happy flying.

Ray

Ready to download AFCAD File For SAEZ?

Free for all simmers · 135.73 KB · Scanned clean

File information

Filename

saez_ade_rs_fsx.zip

File size

135.73 KB

Virus scan

Clean (scanned with ClamAV)

Access

Freeware

Content rating

Everyone

Download speed: Free tier is capped at 0.5 Mbps. PRO members download at full line speed.

This is a freeware file — use is subject to our freeware copyright terms.

How to install this mod

FSX / P3D AFCAD file

Extract the downloaded archive

Use 7-Zip (free) or WinRAR to extract the ZIP to a temporary folder. Don't install while still zipped — the simulator can't read inside ZIP files.
Place AFCAD file

AFCAD files (AF2_*.bgl or AFX_*.bgl) go into FSX\Addon Scenery\Scenery\ or a dedicated AFCAD folder you create.
Always read the included readme

Every mod ships with a readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.

Finding the scenery

Use these coordinates to fly directly to this location once the mod is installed.

FSX / Prepar3D coordinates (or generate a flight plan)

-34.81300000,-58.54000000

Decimal degrees

-34.813000°, -58.540000°

Degrees, minutes, seconds

34° 48' 46.800" S 58° 32' 24.000" W

Launch FSX or Prepar3D and use Flights → Load to open the downloaded .pln file. Your aircraft will be positioned at this location.

What’s inside this archive

The archive saez_ade_rs_fsx.zip has 8 files and directories contained within it.

File Contents

This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.

Filename/Directory	File Date	File Size
Ezeiza Intl Airport.jpg	06.06.12	104.85 kB
ReadMe.txt	06.06.12	3.38 kB
SAEZ_ADE_CW_RS.BGL	10.24.09	26.34 kB
SAEZ_ADE_OBJ.BGL	10.24.09	18.80 kB
SAEZ_ADE_RS.BGL	10.24.09	25.99 kB
FSX_saez_ade_rs	06.06.12	0 B
flyawaysimulation.txt	10.29.13	959 B
Go to Fly Away Simulation.url	01.22.16	52 B