FSX / P3D scenery

FSX Bristol International Airport Scenery

Bristol International Airport (EGGD) gets a detailed refresh with updated terminal layouts, a new cargo facility, expanded overspill parking, and busier apron activity through added service vehicles. Designed as an enhancement to the stock field, it fits seamlessly into Microsoft Flight Simulator X and pairs well with AI traffic for a livelier atmosphere.

4/5 (1) 1.8k downloads 337.35 KB Scanned clean

United Kingdom

Flight Simulator X Prepar3D

Images & Screenshots

3 total

A Ryanair aircraft is parked on a large airport apron surrounded by service vehicles, hangars, and several multi-story terminal buildings.

Several commercial aircraft are parked at terminal gates on a dimly lit airport apron at sunset, with blue taxiway lights visible.

A passenger jet with cargo doors open is parked at an airport apron, surrounded by ground service vehicles and terminal buildings.

Scenery Bristol International Airport. Make over of EGGD Bristol International Airport UK, showing new and old terminals, added new cargo terminal and over spill parking area. Vehicles including fuel trucks increased. Made with ADE for FSX. World Of AI craft makes it come alive. By MG Madden.

Screenshot of Bristol International Airport.

Many thanks for downloading this scenery of the Bristol International Airport. The airport code is EGGD

It is for Microsoft Flight Simulator X only.

This scenery is Freeware and has been made by adding and subtracting to and from the stock airport of Bristol Airport UK in MSFS.

The main carriers using Bristol International Airport are:

Aer Arann REA
Aer Lingus EIN
Air Malta AMC
Air Southwest WOW
Aurigny Airlines AUR
British Airways BA
Continental Airlines COA
Eastern Airways EZE
easyJet EZY
First Choice AMM
Flybe BE
KLM KLC
OLT OLT
Ryanair RYR
SAS SAS
Skybus IOS
SN Brussels Airlines SAB

The airport has probably the shortest major runway at 2011 metres (6598 ft.) in the UK
The designators are 09/27
ILS 09 is 110.15 Mhz
ILS 27 is 110.15 Mhz
NDB on airport is BRI 414

TWR 133.85
GRND 121.925
ATIS 126.025

Installation:

Paste the BGL files from Bristol/scenery folder to your MSFSX addon scenery/scenery folder and run FSX. Alternatively, copy the Bristol folder add it to your addon scenery and point to it from your flight sim add area, both ways will work.

Bristol International Airport really comes alive with the addition of WOAi aircraft, an absolute must for FSX. If you would like a list of aircraft visiting on my simulator drop me an email and I will point you in the right direction.

Many thanks to the people at Airport Editor Design, I used this software for the Airport and I feel it is very good.

Enjoy, if this scenery is successful then I will take on a couple more.

Do not make any money from this scenery or upload without permission.

MGMadden

Screenshot of Bristol International Airport at dawn.

Ready to download Bristol International Airport Scenery?

Free for all simmers · 337.35 KB · Scanned clean

File information

Filename

bristol-1.zip

File size

337.35 KB

Virus scan

Clean (scanned with ClamAV)

Access

Freeware

Content rating

Everyone

Download speed: Free tier is capped at 0.5 Mbps. PRO members download at full line speed.

This is a freeware file — use is subject to our freeware copyright terms.

How to install this mod

FSX / P3D scenery

Extract the downloaded archive

Use 7-Zip (free) or WinRAR to extract the ZIP to a temporary folder. Don't install while still zipped — the simulator can't read inside ZIP files.
Place scenery in Addon Scenery

Create a folder under FSX\Addon Scenery\ containing scenery and texture sub-folders.
Activate in Scenery Library

In FSX, go to Settings → Scenery Library → Add Area. Higher priority means it overrides lower entries for the same location.
Always read the included readme

Every mod ships with a readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.

Finding the scenery

Use these coordinates to fly directly to this location once the mod is installed.

FSX / Prepar3D coordinates (or generate a flight plan)

51.38300000,-2.71900000

Decimal degrees

51.383000°, -2.719000°

Degrees, minutes, seconds

51° 22' 58.800" N 2° 43' 08.400" W

Launch FSX or Prepar3D and use Flights → Load to open the downloaded .pln file. Your aircraft will be positioned at this location.

What’s inside this archive

The archive bristol-1.zip has 14 files and directories contained within it.

File Contents

This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.

Filename/Directory	File Date	File Size
bristol_ overspill.jpg	08.31.10	69.43 kB
bristol_plan.bmp	08.31.10	77.01 kB
early on the apron bristol.jpg	08.31.10	71.99 kB
FILE_ID.DIZ.DIZ	08.31.10	328 B
parking bristol.jpg	08.31.10	125.47 kB
read me first.txt	08.31.10	1.71 kB
scenery	09.01.10	0 B
EGGD_ADEX_MGM.BGL	09.01.10	19.33 kB
EGGD_ADEX_MGM.xml	09.01.10	200.64 kB
EGGD_ADEX_MGM_CVX.bgl	09.01.10	819 B
EGGD_ADEX_MGM_OBJ.BGL	09.01.10	9.35 kB
EGGD_ADEX_MGM_OBJ.xml	09.01.10	71.23 kB
flyawaysimulation.txt	10.29.13	959 B
Go to Fly Away Simulation.url	01.22.16	52 B