Italy

Page 2

Sort

Reset

Calabria ULM

FSX Calabria ULM Scenery v1.0 delivers a freeware, frame-rate conscious addon for Microsoft Flight Simulator X, portraying southern Italy’s ultralight strips with photoreal tiles, embedded autogen vegetation and structures, retained road traffic, and terrain that mirrors coastal slopes and inland hills while forgoing bespoke night textures to safeguard performance.

: 26.9 MB
: 287

Sano Airport

Pilots seeking a faithful rendition of Italy’s Sano Airfield will find updated ground polys, re-drawn aprons, accurate taxiway designations, refined AFCAD for AI circuits, custom hangar textures and dynamic night lighting, all geo-referenced to recent satellite data; a subtle NAV2 Easter-egg on 115.00 adds an extra navigation cue for FSX SP2/Acceleration users.

: 1.33 MB
: 78
: 1

Venice Tessera Int'l Airport

FSX rendition of Venice Marco Polo Airport LIPZ refreshes the default scenery using current Jeppesen and AIP Italy data: RWY 4L/22R becomes the primary taxiway, CAT III RWY 4R/22L holding positions moved, 3-degree PAPI installed, updated ALS, enlarged runway strips, accurate stand codes and SID-aligned traffic flow, all compiled in an AFCAD for Microsoft Flight Simulator X.

: 304.71 KB
: 3.3K
: 5/5
: 1

Palermo Punta Raisi Airport

Punta Raisi LICJ v2.0 brings a precise FSX rendition of Palermo’s Falcone-Borsellino hub, featuring the updated passenger terminal, calibrated AFCAD, crosswind runway coding, animated jetways, comprehensive ground service equipment, photoreal aprons, custom night lighting and verified navaids for both IFR and coastal VFR sorties across western Sicily.

: 25.4 MB
: 3.2K
: 21

Italy

Spanning Milan, Rome, Naples, and down to Palermo, this scenery add-on for Microsoft Flight Simulator X places 12 hop-list Italian airports plus the Maltese island strip into the sim, using stock asset libraries to maintain high FPS. VFR and IFR routes gain updated waypoints, runway data, and coastal reference points; authored by J.D. Starseed.

: 632.62 KB
: 2.9K
: 5/5

LIRF Update

Rome’s LIRF – Leonardo da Vinci / Fiumicino – receives a re-drawn AFCAD for Microsoft Flight Simulator X, delivering geo-referenced taxiways, corrected ILS positions, refined gate assignments for realistic AI traffic flow, an expanded Terminal 3 sized for A380 operations, plus an optional three-runway crosswind setup synchronized with current AIP navigation data.

: 578.79 KB
: 2.7K
: 5/5
: 3

ItalVFR Trentino Alto Adige 2m Photo

Covering the alpine provinces of Trentino–Alto Adige/Südtirol, this ItalVFR 2 m photoreal ground texture package for Microsoft Flight Simulator X provides summer-season orthoimagery, refined mesh and calibrated autogen footprints for accurate low-level VFR navigation across the Dolomites, Adige Valley, Bolzano airspace and Lake Garda approaches.

: 2.1 GB
: 2.4K
: 1

LIMC

FSX and P3D flyers looking for a current AFCAD for Milan-Malpensa LIMC can slot this Rev-13 layout into their Italian collection, gaining revised taxiway coding, correct stand numbering, overflow use of the unfinished Terminal C, updated ground service routes, tower viewpoints and subtle apron lighting aligned with present-day charts.

: 624.49 KB
: 2.4K
: 5/5
: 4

LIPZ Update

LIPZ Marco Polo (Tessera) for FSX brings a revised AFCAD crafted in ADE, correcting runway 04R ILS to 109.95 MHz, expanding stands, refining taxiway signage, adding ground service routes, jetway extensions, extra fuel rigs and control-tower viewpoints for smoother AI traffic flow around Venice’s primary Italian gateway.

: 407.41 KB
: 2.3K
: 2/5
: 2

Sicily Version I

FSX Sicily Version I renders 104 Sicilian municipalities with custom coastlines, five paved airports, two secondary aerodromes and detailed Mediterranean harbours, pairing region-specific autogen and terraformed mesh for smoother VFR hops, realistic approaches and low-level sightseeing across Palermo, Catania, Syracuse and surrounding coastal terrain.

: 19.42 MB
: 1.9K
: 4/5
: 6

Sestri Airport

Genoa’s Sestri Airport LIMJ scenery for Microsoft Flight Simulator X refreshes the default airport with reordered gate numbering, extra apron stands, a dedicated helipad, rooftop tower viewpoint, accurate M-N-P taxiways and signage, additional fuel trucks and vehicle routes, authored via ADE v1.26 and verified with Ultimate Traffic or WOAI.

: 17.45 KB
: 1.7K
: 3/5

Lampedusa Airport, Province of Agrigento

Set in the Sicilian Pelagie archipelago, this FSX scenery for Lampedusa Airport (ICAO LICD) supplies HD ortho-imagery, hand-placed autogen, custom PAPI tuning and an AFCAD matching current AIP data, keeping aprons, taxiways and 737-class stands accurate for realistic island shuttle or GA circuit work within default Italy mesh.

: 22.06 MB
: 1.7K
: 3/5
: 15

AFCAD For LIML

FSX AFCAD enhancement refreshes Milano Linate LIML by synchronizing taxiway geometry and stand allocation, applying the 109.55 MHz ILS for runway 36, and inserting a fire station, truck assets, and radar sweeps—yielding dependable ground navigation and instrument-procedure fidelity at this northern Italian gateway.

: 503.17 KB
: 1.5K

LIRP

Covering San Giusto Airport (LIRP) in Tuscany, this AFCAD refresh for Microsoft Flight Simulator X injects ADE-generated BGL layers that overhaul gate allocation, taxiway designators, signage, service roads, and tower viewpoint offsets, promoting orderly AI traffic sequencing and realistic apron usage for commercial, GA, and military movements around Pisa.

: 367.81 KB
: 1.3K
: 4/5
: 2

Pantelleria 2012

Pantelleria 2012 packages an upgraded LICG for FSX, layering photoreal satellite ground textures over Pantelleria Island, refined coastlines, custom gabled terminals, military apron objects and a corrected AFCAD with dual 18/36 and 03/21 asphalt runways (longest 1 800 m), night lighting and accurate approach navaids for reliable VFR or IFR hops across the Sicilian Channel.

: 38 MB
: 1.3K
: 16

Olbia Airport

Olbia Airport (LIEO) scenery for Italy’s regional index revamps the FSX default field using ADE v1.45 tweaks: usable jet bridges at Terminal 1, freshly plotted Apron 2, re-profiled Apron 3, an ILS RWY 24 dialed to 111.30 MHz, and a fire-service ramp featuring trucks and static rotorcraft.

: 8.93 KB
: 1.2K

Lamezia Terme International Airport

This Microsoft Flight Simulator X add-on updates LICA Lamezia Terme International Airport in Calabria using an ADE 9-compiled AFCAD, matching 2010 Google Earth data to refine runway geometry, taxiway links, apron edge lines and parking positions, supplying regional flyers accurate navaid placement and stand numbers for reliable IFR and VFR planning.

: 74.15 KB
: 1.2K
: 1/5
: 1

LIMF

This AFCAD redesign for LIMF Torino-Caselle Airport aligns stands, aprons, taxiway nodes and jetways with the latest ENR 4-2 AIP Italia data, includes precise gate labels, airline parking codes, hold-short points and refreshed ILS params, yielding credible ground movement and fluid AI traffic in Microsoft Flight Simulator, FSX or Prepar3D.

: 9.34 KB
: 1.2K

Decimomannu

Covering Sardinia’s Decimomannu LIED for FSX, this scenery package renders the twin asphalt runways (2990 m and 2611 m), full NATO gunnery-range layout, revised AFCAD, photo-real terrain, variable-density autogen, operational DEM VOR-DME 108.25 MHz, TACAN, NDB 331 kHz and dual ILS profiles, with correctly placed ramps, shelters, arming pads and fuel pits for realistic fast-jet workflows.

: 13.92 MB
: 1K
: 14

Sardegna 10M Mesh V2

Covering the whole island of Sardinia, this Sardegna 10 m Mesh V2 scenery for FSX offers a digital elevation mesh at 10-meter resolution (LOD 12) from Regione Sardegna GIS data, with corrected coastal water levels, supporting Italian VFR and low-level IFR routes with accurate relief and smoother runway gradients.

: 108.8 MB
: 916
: 2