Italy

Page 3

LIBG

Grottaglie Airport (LIBG) in Taranto, Apulia gains an updated AFCAD for Microsoft Flight Simulator X, refining taxiway geometry, parking stands, and apron links to accommodate Boeing Dreamlifter freight rotations alongside local executive and GA sorties; includes AI flight-plans, ADE-built CVX polygon with autogen exclusion for accurate terrain and coastline alignment.

: 476.58 KB
: 582
: 1

LIRF

Practical AFCAD overhaul for LIRF Rome-Fiumicino brings gate numbering, taxiway lettering and updated apron geometry aligned with current satellite imagery; runway 16C/34C is repurposed as a taxi link while default terminal models remain intact, ensuring AI traffic flows accurately within Microsoft Flight Simulator X’s native scenery framework.

: 78.1 KB
: 568
: 1

LICJ

Update Palermo–Falcone e Borsellino Airport, LICJ, for FSX using this ADE v1.47 AFCAD that refines gate identifiers, corrects parking stands, adds jet bridges, aligns taxiways, and positions a fire station with rescue truck, supplying Sicily-based sim pilots with a chart-true ground layout while retaining default scenery assets.

: 127.89 KB
: 565
: 1

Tessera Int'l Airport

Reworked FSX rendition of Venice-Tessera (LIPZ) introduces the rebuilt passenger terminal from stock library elements, correctly sequenced gate and stand numbers, expanded GA and airline parking, decommissioned 4L/22R converted to taxiway, updated signage, added vehicle paths, tower viewpoint and fuel truck routes, compiled with ADE v1.46 in two clean BGLs for default Microsoft Flight Simulator X terrain.

: 37.04 KB
: 561
: 1

LICR

AFCAD update for LICR Reggio Calabria Airport aligns taxiways, parking stands and ATC frequencies with current AIP charts, calibrated for FSX and matching Ultimate Terrain Europe X land-class scenery layer, giving VFR and IFR pilots accurate runway offsets, SID transitions and approach vectors over the Strait of Messina.

: 5.88 KB
: 505
: 1

Marmolada Dolomite

Covering the Marmolada massif and adjoining Dolomitic ridges, this FSX and Prepar3D scenery supplies 60 cm photoreal orthoimagery, refreshed landclass, and 19 m LOD11 terrain mesh for crisp elevation. Compatible with FTX Global and ORBX Vector, it renders glacial crests, Lago di Fedaia, Passo Pordoi and nearby helipads as reliable VFR reference points for Alpine flights over northern Italy.

: 68.15 MB
: 493
: 1/5
: 1

Sicily ULM

FSX Sicily ULM Scenery v2.0 maps the island’s active ultralight network with photoreal ground textures, geo-referenced runways and balanced autogen, maintaining AI road traffic while keeping frame-time overhead low; daylight VFR flyers gain accurate coastal profiles, agricultural detail and correct field coordinates without night lighting.

: 40.48 MB
: 484
: 1

Tofane Mountains Group

High-resolution photoreal textures depict the Italian Tofane massif in FSX, correcting vertical relief so cliff faces stay sharp, slotting above or alongside ItalVFR’s Trentino layers yet usable solo; freeware package delivers 2-m aerial imagery, custom blend masks, and season-neutral color grading for regional VFR mountain navigation.

: 73.81 MB
: 474
: 2

LIAF Foligno 2009

Covering the 2009 layout of Foligno Airport (LIAF) in Umbria, this FSX-ready scenery adds custom ground polygons, accurate apron markings, optimized Gmax structures and adaptive night lighting, reflecting the MP Servizi Aerei Virtuali hub for online flying and VFR or IFR circuit training across central Italy.

: 19.14 MB
: 451
: 1

ADE File For LIRL

Emiliano Matterazzo's ADE v1.0 scenery enhancement redraws LIRL Latina “E. Comani” Airport for Microsoft Flight Simulator X SP2, supplying an AFCAD upgrade with accurate runway 12/30 thresholds, revised taxiway links, corrected parking spots, updated tower/APP frequencies, refined navigation aids and proper CVX flattens, giving GA pilots and military trainers a realistic central-Italy base for circuit work.

: 218.22 KB
: 447
: 3

LIPM-LIDR

Targeted FSX scenery enhancement for Microsoft Flight Simulator X in Italy adds Modena-Marzaglia (LIPM) and Ravenna (LIDR) aerodromes, supplying revised AFCAD, photoreal grass layer near the LIDR tower, custom hangars, clubhouse models and corrected runway data—an unobtrusive upgrade aligning with default mesh to aid VFR pattern work and online circuit training.

: 4.07 MB
: 437
: 1

LIBR

Focusing on Apulia’s LIBR, this AFCAD rebuild for FSX and P3D revises stand allocation, extends GA and military ramps, and populates Brindisi-Casale with default-library hangars, terminal blocks and vehicular clutter; updated taxiway links and ATC parking codes streamline AI traffic without impacting frame rates.

: 15.77 KB
: 419
: 3/5
: 1

Croda Rossa Photorealistic

This FSX terrain layer supplies 2 m/px photoreal imagery of the Croda Rossa massif in the Dolomites of Alto Adige, built from DEM-aligned aerial photos gathered by a local pilot and balanced for true-to-life albedo; it runs alone or above ItalVFR Trentino, adding crisp alpine ridges, stratified limestone faces, night-mapped textures and reliable VFR reference points for Northern Italy flying.

: 79.31 MB
: 407
: 2

Palermo Falcone e Borsellino/Punta Raisi

Covering Sicily’s primary hub, this FSX-native upgrade for Palermo Falcone-Borsellino (LICJ) refines parking codes, gate numbering, jetway alignment, and airside service vehicles through ADE 1.47, supplying Microsoft Flight Simulator X pilots with regional ILS and VOR procedures that match current Italian AIP charts while maintaining default-level performance.

: 330.42 KB
: 393
: 1/5
: 1

Punta Raisi Airport

Palermo LICJ—Punta Raisi for FSX introduces selectable crosswind-active or standard runway logic, refined AFCAD parking, rebuilt service-vehicle taxiways, and custom jetways, giving AI traffic reliable stands while maintaining Sicilian coastal VOR approaches; Ray Smith’s ADE-based design aligns with Italy’s photoreal terrain libraries.

: 34.29 KB
: 364
: 1

Sassolungo Group

Covering the Sassolungo massif in Italy’s Dolomiti di Fassa, this FSX / Microsoft Flight Simulator X add-on layers 2 m ItalVFR photoreal groundwork with custom BGL polygons and high-definition terrain mesh plus corrected cliff mapping, delivering crisp alpine ridges, snowfields and rock faces free from vertical-texture warping—ideal for VFR circuits around Trentino’s rugged airstrips.

: 44.35 MB
: 348
: 1/5
: 2

ADE File For LIMW

Updates LIMW Aosta Airport in northern Italy for FSX / Prepar3D with a realigned asphalt runway, correctly labelled taxiways, ICAO signage and additional apron stands, allowing fluid AI and general-aviation traffic across this Alpine valley field; dovetails with Fulvio Mazzokan’s Valle d’Aosta photoreal package and was compiled using Airport Design Editor 1.20.

: 6.9 KB
: 338
: 2

Linosa Island

Cover Linosa, the quiet volcanic outpost between Sicily and Tunisia, with this freeware FSX add-on that deploys 1.2 m/px photoreal imagery, accurate coastlines and custom autogen for reliable VFR legs from nearby Lampedusa (LICD) or Pantelleria (LICG) in Microsoft Flight Simulator X.

: 9.77 MB
: 310
: 1

Sicily VFR X Lakes

Refining Sicily’s inland waters, “Sicily VFR X – Lakes and Reservoir” for Microsoft Flight Simulator X revises shoreline vectors, waterclass and polygons using Google Earth source data, giving VFR pilots sharper hydrography that aligns with Sicily VFR mesh and remains usable alongside SicilyULM or Taburet’s Vector Europe after minor exclusions.

: 2.77 MB
: 290
: 6

Italy Airport Of Scalea

Designed for Microsoft Flight Simulator X, this Scalea, Italy airstrip adds an uncharted Calabrian airport featuring a medium-length asphalt runway, ramp space, and essential ground objects—ideal for light business jets, general aviation traffic, and VFR navigation along the Tyrrhenian coastline.

: 2.88 KB
: 287
: 6

4 pages with 64 downloads.

previous 1 234 next

Sign-Up

Signing-up for PRO gives you super fast, unrestricted speed to the thousands of MSFS, FSX, P3D & X-Plane downloads which include aircraft, scenery, and more - click here to view the library for free or...

Sign-Up Now

PRO membership payments go directly back into the website to pay for hosting, bandwidth, and development costs. It's what also enables us to offer a free download tier.

Subscribe to our Free Newsletter

Join over 145,000 subscribers of our free dedicated flight simulation newsletter. Featuring new add-ons, products and industry news.

Mods of the Day

Global Hot Mod of the Month

FSX/P3D FreeMeshX Global Terrain Mesh Scenery 2.0

Filesize: 45.47 GB

MSFS (2020) Add-on of The Day

Quixadá Airport (SNQX) Scenery

Filesize: 71.02 MB

Today's Hot Download

FSX MCAS Miramar - Mitscher Field Scenery

Filesize: 53.08 MB

	Yes, they have really improved it.
	No, I haven't downloaded it yet...
	I'm going to stick with my original FSX.
	I haven't even moved to FSX, I'm sticking with FS2004.
	No, X-Plane 12 all the way!
	...there's a new Microsoft Flight Simulator?
	I'm staying with Prepar3D.
	I'm staying with Microsoft Flight Simulator X: Steam Edition.