FSX AFCAD Files

Page 20

Sort

Reset

Queensland Airport Pack Three

Ten Queensland locations appear, including YBCV Charleville, YCCY Cloncurry, YCDR Caloundra, YCEL Capella, YCFN Clifton, YCGO Chillagoe, YCHT Charters Towers, YCMT Clermont, YCMW Camooweal, and YCNY Century Mine, operated by Zinifex in The Gulf Country. The assets use the .bgl extension.

: Australia
: 22.33 KB
: 724

San Jose Del Cabo

San Jose Del Cabo’s MMSD layout enlarges the apron and adds airport vehicle routes, while the perimeter fence realigns to meet at the terminal, improving access for ground movements and capacity at the site overall.

: Mexico
: 4.45 KB
: 723

Lands End/St Just Airport

Southwest England airfield EGHC receives a revised layout with accurately marked runways, some with edge lines, a terminal, fuel stations, two hangars, and correctly placed buildings, complemented by static planes and a static helicopter, near the coast. The EGHT_ADEX_RB.BGL file, in BGL format, accompanies the work.

: United Kingdom
: 4.65 KB
: 720

VHSK Shek Kong Airfield

In Hong Kong's New Territories, VHSK is designed using satellite imagery to provide a rough approximation of the airfield and to support light General Aviation operations in the region. It ships as two BGL files, AIG_VHSK_ADEX_PH.BGL and AIG_VHSK_ADEX_PH_CVX.bgl.

: Hong Kong
: 406.77 KB
: 696
: 1

LEPA

Palma de Mallorca’s LEPA is updated with a modified ground layout and repositioned gates in a new bgl file credited to Dean Hammer, while Air Berlin gate positions change and added ground service assets enhance operations; a separate lights file by Jim Dhaenens is referenced.

: Spain
: 20.72 KB
: 694

MMPR

Lic. Gustavo Dyaz Ordaz International Airport in Puerto Vallarta, Jalisco, Mexico, receives a major update that modifies the default gates and adds new taxiways and roadways, by Ponchiz Savinon. It places the MMPR_ADEX_PM.BGL file in the addon directory.

: Mexico
: 8.41 KB
: 681

TJSJ

An updated Luis Munoz Marin International layout adds Terminal A with assigned gates, shifts terminals and traffic paths, and introduces the Puente Teodoro Moscoso Bridge with night lighting and off-airport elements. TJSJ_KA.bgl is created with ADE V1.40, with approach transitions updated from official plates and ADE.

: Puerto Rico
: 623.43 KB
: 668
: 3

EGNT

Newcastle Airport (EGNT) in the United Kingdom gains gate placements with numbers, and adds fuel storage and a fire station to the existing layout. Paul Humphries presents the first Newcastle file as a single bgl that revises the stock baseline for EGNT.

: United Kingdom
: 9.09 KB
: 657

LEBL

Barcelona International Airport El Prat in Spain receives a geographic realignment that repositions taxiways and aprons, adds missing taxiways, and enforces crosswind runway operations so 07L/25R becomes the landing path and 07R/25L handles takeoffs. The package includes two files, AIG_LEBL_ADE_MB_Default.bgl and AIG_LEBL_ADE_MB_Default_CVX.bgl, with jetways repositioned and parking adjusted.

: Spain
: 446.06 KB
: 657
: 2

South African Airports Update

By Wessel Bonnet, the revision revises several airfields in southern Africa, adding correct taxiways and new aprons at FAJS, while incorporating Highveld sites FASC, FATT, and FAKG alongside FAGM, FAVG, FAKS, and FYWH (Namibia). A handful of fictional farm strips accompanies the assets in .bgl format.

: Global (World)
: 57.49 KB
: 657
: 1/5
: 1

EKCH

The Kastrup_EKCH.bgl layout realigns gates A through H, plus R and W, using Danish AIP data at Copenhagen/Kastrup in Denmark, and extends Runway 12-30 by 500 meters while adjusting taxiways, lighting, and centerlines to mirror real-world layout; it remains not compatible with AI traffic.

: Denmark
: 65.65 KB
: 649
: 1

EBOS

Oostende-Brugge Airport modernization by Matthew Brooks and Alpha-India Group extends the runway to 3,200 meters and realigns taxiways and aprons to align with Jeppsen charts, including the addition of Apron 1. Three files named AIG_EBOS_ADE_MB_Default.BGL, AIG_EBOS_ADE_MB_Default_CVX.BGL and AIG_EBOS_ADE_MB_Default_OBJ.BGL carry the changes.

: Belgium
: 248.88 KB
: 643
: 1

EGSS

A revised Stansted, UK layout by Eric G. Hansen relocates gates, nodes, taxiways, vehicle paths, generic buildings, apron polygons, the control tower, and fences to align with aerial photographs. It fixes apron light strips, detaches a taxiway node to stop a mid-runway U-turn, and adds helipad start location; the files use the .bgl extension.

: United Kingdom
: 30.94 KB
: 605
: 4/5

EINN

Two BGL files update Shannon International by realigning taxiways, redrawing the main apron, and adding jetways and expanded GA parking. Additionally, the landclass near the Shannon Aerospace Building and an A91 road loop around the terminal enhance the layout, alongside an extensive vehicle network and taxiway overlays that maintain flow around out-of-use R13/31.

: Ireland
: 282.95 KB
: 604
: 1

Newquay Airport

EGHQ_ADEX_MW.BGL updates Newquay Airport (EGHQ), formerly St Mawgan (EGDG), changing the name and code to Newquay/EGHQ while adding parking for the passenger terminal and GA area plus default buildings; four runway exits remain, matching the real layout, with the author credited as Matthew Worsley.

: United Kingdom
: 115.63 KB
: 598
: 1

Derry-Eglinton Airport

At Derry/Eglinton airfield (EGAE) in Northern Ireland, UK, this modification adds ILS to runway 08 and designates a dedicated fire training area, reflecting a careful alignment of the field's approach options with the existing airport layout.

: United Kingdom
: 143.42 KB
: 592

YPPH

Two runway-operation variants exist for YPPH, with YPPH_CW_RS.BGL enabling crosswind use and YPPH_RS.BGL preserving default operations, and four BGL files are present: YPPH_RS.BGL, YPPH_CW_RS.BGL, YPPH_CVX.bgl, and YPPH_OBJ.BGL; gates for the A380 are added, a new Terminal 2 is introduced, and the old fire station and tower are removed.

: Australia
: 671.01 KB
: 591
: 4

CYVR Update

Vancouver International Airport gains a modification crafted with the latest ADE, removing autogen along the western shoreline, the 8L/8R approach corridors, and Swishwash Island in the southwest, compatible with CYVR_ADE_RS_FSX.ZIP and a CYVR_autogen_X.bgl file by Ray Smith.

: Canada
: 317.15 KB
: 587
: 2

LIBG

Grottaglie Airport in Tarranto, Italy receives a LIBG modification by Reggie Fields / Alpha-India Group, produced with ADE V1.38.04, and is noted as a base for the Boeing Dreamlifter. The package includes two BGL files, AIG_LIBG_ADE_RJF_Default.BGL and AIG_LIBG_ADE_RJF_Default_CVX.BGL, with the CVX version excluding autogen.

: Italy
: 476.58 KB
: 586
: 1

Brisbane West Wellcamp Airport

An Australian airport with code YBWW gains ILS/DME approaches on both runways and four gates, offering more precise landings and taxiway layouts for pilots and ground crews. A file named YBWW_ADEX_LA.bgl is included to apply these details.

: Australia
: 3.18 KB
: 585
: 1/5