FSX AFCAD Files

Page 17

Sort

Reset

AFX File For PADU

Eric Bettarello delivers a file for Unalaska/Dutch Harbor PADU in Alaska, named AFX PADU. The item centers on the PADU airport in Alaska, carries creator attribution, highlighting a single variant identified by the file name for regional navigation setup.

: United States of America
: 5.34 KB
: 661

AFX File For KEDW

An AFX-format file designed for Edwards AFB in California modifies the default facility to add abundant parking, enabling AI and civilian aircraft to use the airfield. Paul Strogen creates it with Airport Design Editor today.

: United States of America
: 262.7 KB
: 647

AFCAD For KATL Update

At Atlanta Hartsfield-Jackson Airport in Georgia, a version 1.2 adjustment corrects traffic crossing runway 28 by implementing a revised exclusion so roadways no longer appear beneath the area. The adjustment uses Airport Design Editor v1.50 and requires KATL_2011_ETI.ZIP, introducing the file KATL_ADEX_ETI_CVX.

: United States of America
: 2.01 KB
: 633

Newquay Airport

EGHQ_ADEX_MW.BGL updates Newquay Airport (EGHQ), formerly St Mawgan (EGDG), changing the name and code to Newquay/EGHQ while adding parking for the passenger terminal and GA area plus default buildings; four runway exits remain, matching the real layout, with the author credited as Matthew Worsley.

: United Kingdom
: 115.63 KB
: 605
: 1

Portland International Airport

Two BGL variants, FSX_kpdx.BGL and FSX_kpdx_cw.BGL, by Ray Smith for KPDX, present a crosswind runway option and a standard setup. The cw file activates all runways, while the baseline version omits parking; gates are added, parking is assigned, a service road is rebuilt, and a helipad appears on the GA apron.

: United States of America
: 31.26 KB
: 603

McCarran International Airport

Two KLAS bgl files are included, with only one active at a time, and gate data updated for the new D-gate extension at Terminal 1. AI-specific curved approaches to 7R/19R replace LOC symbols with ILS header data at the end of the list, aided by ADE v1.47.7 and contributions by Jim Vile.

: United States of America
: 214.04 KB
: 599
: 1

YPPH

Two runway-operation variants exist for YPPH, with YPPH_CW_RS.BGL enabling crosswind use and YPPH_RS.BGL preserving default operations, and four BGL files are present: YPPH_RS.BGL, YPPH_CW_RS.BGL, YPPH_CVX.bgl, and YPPH_OBJ.BGL; gates for the A380 are added, a new Terminal 2 is introduced, and the old fire station and tower are removed.

: Australia
: 671.01 KB
: 597
: 4

KELP

KELP_ADE_RS.BGL implements the standard runway operation, KELP_ADE_CW_RS.BGL enables crosswind activity across all three runways, and KELP_ADE_OBJ.BGL adds additional 3D objects. All versions share the same gate assignments, and a tower-view from the control tower roof provides a broader perspective.

: United States of America
: 509 KB
: 597
: 3

KPVD

Two versions of the Providence airport update present, offering standard and crosswind configurations, distributed as two BGL files for installation. The crosswind variant includes landclass data, and the package reworks surface features, apron layouts, and taxiways to align with real-world layout while adding a heliport and expanded parking.

: United States of America
: 186.08 KB
: 596
: 5/5
: 1

HTKJ

Kilimanjaro International Airport in Tanzania, IATA JRO and ICAO HTKJ, appears as version 1 created by Bashir Ismail. HTKJ.bgl and HTKJ_cvx.BGL are provided, and the facility can handle aircraft up to Boeing 747s while serving Arusha and Moshi near Mount Kilimanjaro.

: Tanzania, United Republic of
: 1.42 MB
: 596
: 7

AFCAD For KDAY

Dayton's James M. Cox Dayton International Airport receives a layout update featuring new terminal buildings modeled with FSDS after excluding the default terminal, and three runways—6L-24R, 6R-24L, and 18-36—open for air traffic. Gates B2-B19 and C13-C24 are depicted, with a dedicated FedEx cargo ramp and redesigned vehicle paths to keep ground vehicles off taxiways.

: United States of America
: 1.67 MB
: 595
: 1

CYVR Update

Vancouver International Airport gains a modification crafted with the latest ADE, removing autogen along the western shoreline, the 8L/8R approach corridors, and Swishwash Island in the southwest, compatible with CYVR_ADE_RS_FSX.ZIP and a CYVR_autogen_X.bgl file by Ray Smith.

: Canada
: 317.15 KB
: 593
: 2

Brisbane West Wellcamp Airport

An Australian airport with code YBWW gains ILS/DME approaches on both runways and four gates, offering more precise landings and taxiway layouts for pilots and ground crews. A file named YBWW_ADEX_LA.bgl is included to apply these details.

: Australia
: 3.18 KB
: 590
: 1/5

El Paso International Airport X2 V

Two BGL variants address the KELP airport in Texas, one with crosswind runway activation and one default, named KELP_ADE_CW_RS.BGL and KELP_ADE_RS.BGL. Improvements include assigned parking, correctly numbered gates, missing gates, animated jetbridges on the east concourse, taxiways corrected, holdshorts at runway 8L repositioned, and ADE v1.20 design with tower-view perspectives, tested with Ultimate Traffic/WOAI.

: United States of America
: 49.64 KB
: 590

Stock KCLE

Two files, KCLE_KA.bgl and KCLE_KA_CVX.bgl, modify KCLE by aligning airline terminal and gate assignments with official data while expanding ramp parking for Challenger-sized GA and cargo and commuter spaces. Navigation updates include extending Runway 6R-24L, decommissioning 6C-24C with taxiway C, and introducing updated ILS, RNAV GPS, GPS, and NDB approaches.

: United States of America
: 231.3 KB
: 589
: 1

LIRF

Gates, taxiways, and apron polygons at Rome Fiumicino are relocated to align with Google aerial imagery, while default buildings remain fixed. Gates are numbered on the tarmac and taxiways labeled with painted letters; Runway 16C/34C is decommissioned and serves as a taxiway, with placements balancing aerial references and existing structures, by Eric G. Hansen.

: Italy
: 78.1 KB
: 586

AFCAD For KJAX Jacksonville

Jacksonville International (KJAX) in Florida revises runway numbers to align with current magnetic headings, a correction by J. D. Starseed. The .BGL files reflect these revised identifiers and enable enhanced ATC interactions on online networks.

: United States of America
: 789.74 KB
: 576

Zurich Airport

Two configuration options for LSZH exist, FSX_lszh_cw.BGL enables crosswind runways while FSX_lszh.BGL preserves conventional traffic flow, with revised parking and expanded ground handling assets. Ground support teams rebuild routes and add extra fuel trucks to support busier operations, while ATIS may reference fake runways when this configuration is active.

: Switzerland
: 35.84 KB
: 571

ADE File For LGIR

Two BGL files update Nikos Kazantzakis Airport in Iraklion, Greece: LGIR_ADE_RS.BGL and LGIR_ADE_CW_RS.BGL. The CW_RS version activates crosswind runways, while LGIR_ADE_RS.BGL remains default; both add extra parking, rebuilt support vehicle roads, and extra fuel trucks, created by Ray Smith.

: Greece
: 14.85 KB
: 568

EGCC

Manchester Airport in the UK receives a runway renumbering to 23/05 and revised parking that aligns with real-world layouts for EGCC. Noel Marsh-Giddings receives credit for this layout adjustment reflecting current operations at EGCC today.

: United Kingdom
: 14.47 KB
: 554