FSX AFCAD Files

Page 10

Sort

Reset

Gatwick Airport

Gatwick Airport (EGKK) is reworked with re-sited and enlarged parking plus new spaces, and airline codes are added to the North and South Terminal parking. The North runway becomes takeoff only and the South handles landings, with extra taxiways to improve AI traffic flow; the EGKK_FSX_CD.bgl file applies the layout via an Add-on directory.

: United Kingdom
: 21.76 KB
: 1.5K

AFCAD For LIML

Freddi Maurizio updates Milano Linate Airport in Italy with modified taxiways and taxi designators, a new ILS frequency for Runway 36 LNT at 109.55, and a fire station with a fire truck and radar object.

: Italy
: 503.17 KB
: 1.5K

AFCAD For MROC Update 2012

AF1 focuses on Juan Santamarya International Airport in San Jose, Costa Rica, refining taxiways, runway, parking areas, vehicles, and pedestrians near the facility. Leonardo Corrales credits the work with the AF1 designation.

: Costa Rica
: 18.12 MB
: 1.5K
: 4

RJCC

New Chitose, Sapporo, Japan, gains enhancements designed with the latest airport design editor, adding assigned and extra parking, corrected taxiways, a new control tower, and added fuel trucks and vehicle paths, with views from the tower. Two BGL files exist: RJCC_ADE_RS.BGL and RJCC_ADE_OBJ.BGL, the RS version intended as the sole active file to prevent conflicts.

: Japan
: 22.08 KB
: 1.5K

KMSP

Minneapolis-St. Paul International/Wold-Chamberlain Airport in Minnesota gains a new runway 17/35, extending 8,200 feet, and adds new taxiways to improve flow. Six large gates prepare for A380 docking, reflecting gate assignments tailored to the airport’s layout.

: United States of America
: 189.34 KB
: 1.5K
: 5/5

LECO - A Coruna Airport

A Coruna's airport serves the Galician city in northwestern Spain and sits in Culleredo, about seven kilometers from the city center. Two Landclass variants address compatibility, with files such as AIG_LECO_ADE_KPK_Default_CVX_WithoutUTX.bgl and AIG_LECO_ADE_KPK_Default_CVX.bgl, while included assets comprise lightobj.bgl and DDS files almwht.dds and lights1.dds.

: Spain
: 637.35 KB
: 1.4K
: 1

AFX Files for Canadian Airports

Fifteen configurations cover Canadian airfields, including CYEG, CYYZ, CYUL, and CYHZ, using Airport Facilitator X to model gate placements and airline assignments based on travel notes, satellite imagery, and official charts. Some gates appear without terminal buildings, reflecting alignment with real-world layouts rather than the default setup.

: Canada
: 213.75 KB
: 1.4K

KSEA

Ray Smith authors this Seattle-Tacoma enhancement, refining apron layouts with new parking, improved ground-crew routing, expanded jetway elements, and tailored fuel facilities for the default KSEA rendition. The package includes KSEA_RS.BGL, KSEA_CVX.BGL, and KSEA_OBJ.BGL, hosted by Fly Away Simulation.

: United States of America
: 580.69 KB
: 1.4K
: 5/5
: 3

WIII

An airport layout file named WIII_MW.bgl for the default Jakarta Soekarno-Hatta International Airport, Indonesia, corrects elevation, gate numbers, and taxiway positions. Gate assignments reflect real passenger usage in spring 2009, and it has been tested with external AI packages and custom AI only, by Marten Weber.

: Indonesia
: 240.67 KB
: 1.4K
: 1

Queensland Airport Pack 2

Kym Burton upgrades ten Queensland airports, including YBAF Archerfield, YBCK Blackall, YBCS Cairns, YBEO Betoota, YBLL Bollon, YBOA Boonah, YBOI Boigu, YBPI Brampton Island, YBUD Bundaberg, and YCAB Caboolture. These entries reference Google Earth and Australian Airservices, and appear as .bgl files.

: Australia
: 39.83 KB
: 1.4K

KPDX

Ray Smith delivers an updated airport layout for KPDX, refining runway lengths, parking designations, and ground pathways to match current charts. The release includes crosswind variants such as KPDX_CVX.bgl and KPDX_RS.BGL, plus KPDX_OBJ.BGL, with a CW_RS option for ATIS references and a caution to run only one runway file at a time.

: United States of America
: 472.92 KB
: 1.3K
: 5/5
: 3

DAAK

Boufarik, Algeria, hosts an ADE-designed update for a default airport, created with the latest Airport Design Editor. It uses two BGLs, DAAK_ADEX_JV.bgl and DAAK_ADEX_JV_CVX.bgl, and integrates four airplane types included with MAIW Algerian Transports; a Beech 1900 propeller disk requires correction.

: Algeria
: 6.6 MB
: 1.3K
: 16

WBKK

Two BGL files—WBKK_ADEX_HS.BGL as the main design and WBKK_ADEX_HS_CVX.bgl that expands the apron and runway—along with two DDS files, JFK_Jetway.dds and JKF_Jetway_LM.dds, anchor the project. The setup is tested with Boeing 747-400 and Airbus A330-200 and adds a parallel taxi path from runway 20 plus apron expansion, with surrounding buildings based on KKIA photos.

: Malaysia
: 328.14 KB
: 1.3K
: 1

OJAI Updated

Two BGL files, AIG_OJAI_ADE_MB_Default.BGL and AIG_OJAI_ADE_MB_Default_CVX.BGL, deliver updated airport data for Queen Alia International Airport, with the CVX variant including landclass. Jetway extensions based on Google Earth imagery are implemented, using JFK_Jetway.dds and JFK_Jetway_LM.dds for proper placement.

: Jordan
: 307.59 KB
: 1.3K
: 1

PHNL

PHNL presents two configuration paths, crosswind and non-crosswind, each with four base files: AIG_PHNL_CW_ADEX_PH_Default.bgl, AIG_PHNL_CW_ADEX_PH_Default_CVX.bgl, AIG_PHNL_ADEX_PH_Default.bgl, and AIG_PHNL_ADEX_PH_Default_CVX.bgl. CW-CVX variant adds landclass and terrain modifications within the airport boundary, while lightobj.bgl, almwht.dds and lights1.dds accompany the files.

: United States of America
: 923.64 KB
: 1.3K
: 5/5
: 1

Thai Airways Airbus A380 Flight Plans Fix/Patch

Kevin R. Wynn issues a correction to FSX_THA_A380_FLTPLN.ZIP, addressing an error in the OMDB to LFPG flight and the turn sequence for the Thai Airways A380. The revised file restores the intended routing, ensuring the plan reflects the original author's intent.

: Thailand
: 1.98 KB
: 1.3K

AFCAD For HECA

Two BGL files, AIG_HECA_2011_ADEX_MB_Default.bgl and AIG_HECA_2011_ADEX_MB_Default_CVX.bgl, are provided to improve Cairo International. The package adds Terminal 3, new apron areas, and the runway 05R/23L, while renaming the former 05R/23L to 05C/23C and revising taxiway signs.

: Egypt
: 1.07 MB
: 1.3K
: 1

AFCAD For KATL Atlanta Hartsfield

Operators at Atlanta Hartsfield in Georgia gain a five-runway layout reflecting the real airport, with Runways 10 and 28 recently constructed. The adjustment ensures correct runways appear during online multiplayer sessions and preserves frame rates, by J. D. Starseed.

: United States of America
: 455.98 KB
: 1.3K

OLBA Updated

Rafic Hariri International Airport in Beirut gains two runway configurations, with the crosswind version identified by CW in the filenames and a separate version without crosswind. Crosswind edition uses AIG_OLBA_CW_ADE_MB_Default.BGL and AIG_OLBA_CW_ADE_MB_Default_CVX.BGL, while the non-crosswind variant uses AIG_OLBA_ADE_KTC_Default.BGL and AIG_OLBA_ADE_MB_Default_CVX.BGL, with JFK jetway extensions on three gates, double jetways and a single animated unit.

: Lebanon
: 498.59 KB
: 1.3K
: 2

Wellington International

Ray Smith administers a single BGL modification for NZWN that adds missing gates, assigns additional parking and fuel trucks, and extends the vehicle road while a helipad sits on the western apron. The file named FSX_nzwn.BGL targets the default airport and has been tested with Ultimate Traffic.

: New Zealand
: 8.53 KB
: 1.2K