FSX Panels & Gauges

Page 3

Sort

Reset

Automatic Elevator Trim Gauge

The mechanism links stick input to elevator trim, moving the trim in tandem with the elevator itself. It does not appear on the panel, but any trim indicator shows its activity, and pushing forward increases down trim while pulling back raises up trim, and it also operates with other flight-simulation programs, by Chuck Dome.

: 4.5 KB
: 1.9K
: 5/5

ISDT Beech King Air B200 Virtual Cockpit

An enhancement for the Beechcraft Super King Air B200 by ISDT, credited to Joao 'Muas' Martins, adds a fully functional virtual cockpit with clickable instruments and animated switches. It shows matching wing views, gauges and sounds align to the King Air 350 default.

: 1.98 MB
: 1.9K
: 3

Virtavia F-4 Pack 2 Panel

By Don Bodenstedt, this cockpit augmentation for Phantom II adds revised afterburners and a red VC light effect that aids night flying, with a basic HUD and a wide range of readouts. Automatic afterburner controls engage at 90% throttle, and about 100 gauges are provided for Phantoms and other era aircraft.

: 4.36 MB
: 1.9K
: 3

Default Boeing 737-800 Added Views

By Marc Renaud, this camera enhancement for the Boeing 737-800 adds ten external viewpoints that cover engine pylons, wings, and tail, while keeping onboard perspectives comparable. Camera definitions insert into the aircraft.cfg, replacing prior angles to maintain a coherent flow, and Renaud copies entries from camera definitions.txt to the bottom.

: 10.73 KB
: 1.8K

Camera Positions For POSKY Boeing 777-300

Three new positions appear for the B777-300 on each side, including wing view, engine, and wing positions. There is no wingview option in the Project Open Sky 777 family, leaving other angles as the focus, by Kaan Aktas.

: 4.77 MB
: 1.7K
: 1

Beech King Air 350 Doublescreen Panel

A two-monitor horizontal span panel provides an extra-wide cockpit view and uses a single instrument window to boost framerates. Created by Rob van Dijk as an extension for the Beechcraft King Air 350, it renames the original configuration to aircraft_org.cfg for the DoubleScreen variant.

: 3.3 MB
: 1.6K

C-2a Greyhound (or any twin-engine turbo prop aircraft) Panel

Newly released panel appears, accompanied by a note that panel building is a trial and error process. An image reference named c-2agreyhoundp.JPG appears with the description, illustrating the concept and indicating a hands-on approach to development.

: 5.88 MB
: 1.6K
: 4/5
: 1

Douglas DC-3 Widescreen 2D Panel

Creator Luiz Alvarenga models a DC-3 2D panel with three finish options—original worn, clean, and black—each paired with corresponding night lighting. The panel uses a single reworked bitmap for the entire visible area and was originally tuned for 2048 x 1152, while first officer gauges remain functional.

: 5.78 MB
: 1.5K
: 5/5
: 6

Lockheed C-5 Galaxy Driveable Payload

From Alphasim, now Virtavia, this adds a driveable payload for the Lockheed C-5 Galaxy, featuring five vehicles: Abrams, Leopard, Humvee, an old US truck, and a modern German fuel truck, with sounds and cargo-bay movement through front or rear ramps alongside added cameras for cockpit and external views.

: 9.75 MB
: 1.4K
: 2

VTOL/Hover Gauge For Wilco Tiltrotor

Version 4.0 introduces V(S)TOL and hover capability for a tiltrotor, with a gauge-coded FDE that overrides standard flight dynamics when nacelles rotate from the normal position. All ten nacelle positions, except the fully forward setting, fall under gauge control, adds a down-camera for Vertical Landings, and includes rotorwash dust.

: 20.12 KB
: 1.2K

Fokker 50 Standard Panel Modifications

Two variants equip the Fokker 50 cockpit with either a Delco Carousel Inertial Navigation System or a BendixKing/Honeywell Flight Management System, using distinct file designs such as Panel.std_Bendix and Panel.std_LTN. The modifications overwrite configuration files in the existing payware release, retaining the turboprop’s essential instrumentation while enabling dual-pilot viewpoints and a mouse-activated navigation display.

: 10.89 MB
: 1.2K
: 8

B-17 Worn And Weathered Cockpit Number 2

Worn cockpit finishes for the B-17 Flying Fortress, by Paul Grubich, align with Accu-Sim dynamics to emphasize aged panels, faded labels, and scuffed levers. Sixteen files from the cocpit folder copy into the target directory, while night lighting is revised to reflect heavy daily use.

: 4.79 MB
: 1K
: 1

Mooney Default Panel Partial Glass

An autopilot-equipped Mooney Bravo panel switches to a partial glass layout as J. D. Starseed reworks it with all default gauges. The modification uses Microsoft gauges to provide a second cockpit option for varied flight experiences.

: 4.41 MB
: 1K
: 3/5
: 1

Embraer A-29B Widescreen 2D Panel

An extended 2D panel for a Super Tucano widens compatibility with widescreen displays, relying on A-29B_ST.ZIP and gauges from the original VC panel alongside MS defaults. A radar panel by Jonathan Hougaard shows AI traffic and airports, with night mode, and it was originally developed for 2048 x 1152, but should work with similar ratios.

: 4.6 MB
: 1K
: 1

Cessna 680 Citation Panel

Pasquale Rinaldi supplies a complete cockpit panel for a Cessna 680 series jet, featuring some new gauges that enhance cockpit realism and operator feedback. The archive includes a Panel subfolder, designed to integrate into existing cockpit setups across multiple add-ons.

: 934.48 KB
: 923

Boeing 767-400 Panel For Dual Monitors

Presented as a dual-monitor cockpit panel for the 767-400, this configuration merges the captain’s and first officer’s instruments into a single span, with a reworked overhead and refreshed side windshields. Developed by Alan M. Harvey with Tim de Groot’s photograph, it supports two identical displays and 2048×768 or higher resolutions.

: 33.93 MB
: 915
: 5/5
: 1

F-111 Pig HUD Project - Revision 7

Revision 7 refines the Pig HUD concept, requiring FXPIGGB5.ZIP to be installed first. Radar contours extend from sea level to 17,000 feet and can view any airport worldwide from its current position, while Pave Tack delivers close-up detail to 20 nm in 1-degree increments with pan capability.

: 16.2 MB
: 869
: 27

Complete with Base Model

Hovercraft Panel

A modified panel plus cameras for the passenger hovercraft ferry by Mitsuya Hamaguchi requires HOVERV03.ZIP today. The 2D device matches the VC and offers five external and six internal views, with configuration by Erwin Welker.

: 1.81 MB
: 814
: 5

Beech B1900D 2D Panel

Henry Tomkiewicz's AI model underpins the B1900D variant of the King Air family, and Chris Thompson or Tom Tiedman makes it flyable. The project includes a slightly modified aircraft.cfg, and the design uses a modified bitmap with xml gauges.

: 2 MB
: 790
: 2

Alphasim North American Aviation RA-5C Panel

An enhancement for the RA-5C Vigilante provides a grey 2D panel alongside a completely new high‑resolution virtual cockpit main panel, plus a beta version of cockpit sounds. By Don Bodenstedt, it requires the base Alphasim aircraft and Rev1 adds changes to enable compatibility with Rob Barendregt’s RCBCO-30.ZIP.

: 30.95 MB
: 714
: 1

9 pages with 174 downloads.

previous 1 234 5 6 7 8 9 next

Skip the wait. Go PRO.

Unrestricted speeds and zero ads — for the cost of a coffee.

Unrestricted speed — no throttling, ever
Ad-free downloads & pages
Access to tens of thousands of curated add-ons
Cancel anytime — no contract

Join PRO Now

Or browse free downloads →