FSX Panels & Gauges

Page 7

Sort

Reset

Airbus A340 Wing Views Pack

Open Sky's Airbus A340 wing-view collection presents before-wing and after-wing passenger camera definitions alongside abundant virtual cockpit angles, credited to Luke Powell. It references the aircraft.cfg.txt lines to append into the main configuration and has been tested on posky a342 and a343, with potential compatibility to other airframes.

: 10.51 MB
: 680

Default Maule M7-260C Orion Views

Marc Renaud delivers a modification for the M7-260C Orion, adding six external camera angles and two interior viewpoints by inserting new camera definitions into the aircraft.cfg, with compatibility across wheel- and ski-equipped editions. The included camera definitions.txt file provides the changes, and one original interior view is disabled to fit the new placements.

: 81 KB
: 665
: 2

Default Cessna SP 172 Added Views

Marc Renaud offers seven new camera definitions for the Cessna 172 SP, inserting them into the aircraft.cfg to replace the default angles and reveal exterior lines, landing gear, and the high-wing structure. Inside the cockpit, interior viewpoints highlight the instrument panel and center console, and a camera definitions.txt file accompanies the changes for straightforward addition.

: 117.39 KB
: 650
: 2

Default Bombardier CRJ 700 Reworked Views

Ten new external camera angles accompany a Marc Renaud–authored refinement for the CRJ 700, with precisely coded viewpoints in the aircraft.cfg that emphasize the T-tail and wing assemblies while keeping the cockpit layout intact. The work includes a camera definitions.txt and a PDF with coordinate tables for quick reference.

: 56.35 KB
: 646

Panel Files For Default Beechcraft Baron

RealityXP FlightLine 'T' and 'N' panel configurations for the Beechcraft Baron include RXPFLN.INI and FXPFLT.INI, tuned to gauge realism with VSI set to I-VSI. Requires RealityXP FlightLine 'T' and 'N' to be installed; unzip and copy panel.cfg, RXPFLN.INI, and FXPFLT.INI into Beech_Baron_58 Panel with a backup of the original panel.cfg, by Joe Schwartz.

: 236.65 KB
: 634
: 1

Reworked And Added Views For Embraer 190

Marc Renaud delivers camera definitions for the Embraer 190, adding ten new fuselage angles and four optimized cockpit viewpoints to improve cockpit surveying and exterior inspection. The setup relies on camera definitions.txt and appends them to aircraft.cfg to activate the new perspectives.

: 79.58 KB
: 631

Added Views For The Bell UH-1 Huey

Eight external camera angles and five interior views accompany a flight-simulation-adapted model by Tolga Piskin, refined by Eric Buchmann. Camera definitions live in the aircraft.cfg, with a camera definitions.txt supplied by the author, by Marc Renaud.

: 97.3 KB
: 605

M1000A Primary Flight Display

By Michael Kelley, a compact PFD conceived with an integrated radar altimeter, vertical speed indicator, and autopilot. The gauge is provided as MK_PFD.cab and sized 320 by 620 pixels, with a slim design to save panel space for home designed panels.

: 4.14 MB
: 600
: 3

Avro RJ100 Panel For Dual Monitors

The panel spans two horizontally arranged displays, presenting captain and first officer views that are not exact duplicates and includes a modified pedestal with a new overhead panel; the engine main set duplicates engines one and three and two and four, and a 2048x768 cockpit view is recommended.

: 20.04 MB
: 552
: 1

Cessna 195 "Shakey Jake" Panel Update

Don Bodenstedt supplies a panel refinement for the Joe Binka Cessna 195 nicknamed ShakeyJake, intended for use with SHKYJAKE.ZIP, and it brings the panel to a newer standard. Night highlighting of the left-side gauges inside the VC is reworked, knobs gain color via m.bmp, and P1_L.bmp is replaced.

: 585.36 KB
: 497
: 1

Beechcraft 18DS Auto Smoke Gauge

A Beech 18 gauge provides a small smoke effect from both engines, generated by an XML gauge that activates when throttle exceeds about 60 percent. The design by Richard Wisman allows cfg edits with a text editor.

: 16.25 KB
: 489

North American RA-5C Vigilante Panel

A two-panel arrangement centers on a primary cockpit with a second pilot's console and a rear-seat navigator panel that includes GPS and radio. The configuration supports carrier operations with COP3 readiness and RCBCO-30.ZIP, the panel aligns, uses default gauges, and offers three wingman, four external, and three internal views, with layout by Erwin Welker.

: 1.36 MB
: 483
: 2

DeHavilland DHC6-300 Twin Otter Views

An updated set of views covers the De Havilland Twin Otter in wheels and floats, alongside the DHC6-100 with a skydiver effect, all by Premier Aircraft Design and authored by Marc Renaud. The aircraft.cfg defines eight external viewpoints and six virtual cockpit angles.

: 81.9 KB
: 475
: 5/5

Fokker 50 Flight Deck And Passenger Compartment

A refinement by Emile Lancee targets the Fokker 50 cockpit and passenger cabin, requiring the payware Fokker 50 from Precision Aerobus to function. It refreshes cockpit panels and overhead switches for clearer instrument surrounds and updates seat fabrics to a modern look, while DDS files copied into the Fk50_vx1 directory apply to the specified variant.

: 7.41 MB
: 474
: 7

Dassault Rafale A, C, M Added Views

Seven cameras point at the aircraft, including two chase views and one afterburner view, covering A, C, and M variants. Camera definitions reside in the aircraft.cfg, and a text file with the new definitions is included for all models, with credits to Cyril Pioffet, Eric Marciano, Anthony Douglas, Vladyslav Pavlyuk, and Marc Renaud.

: 1.16 MB
: 465
: 7

Fokker 50 Triple Display Panel

Three-monitor cockpit setup supports switching between the captain and first officer positions, with distinct Delco Carousel Inertial Navigation or Bendix/King/Honeywell Flight Management System configurations. Emile Lancee develops the configuration, and it requires the payware Fokker 50 from Precision Aerobus and uses panel files that distinguish Delco (LTN) and Bendix/King builds, optimized for 3840 x 1024.

: 43.19 MB
: 461
: 8

Douglas R4D Panel

By John Detrick, this is a modified default cockpit panel for the Manfred Jahn C-47, with gauges shifted to resemble a usable layout. It incorporates a four-tank arrangement developed by Dave Bitzer and Mark Beaumont and requires DCA_4TK.ZIP, while the panel resides in the panel.R4D folder and maps to the Douglas_C47 directory.

: 3.48 MB
: 424
: 2

Douglas Boston Panel

Two-panel arrangement for Alphasim's freeware Douglas Boston MkIII / A-20 Havoc, delivering a 2D and a 3D cockpit option while relying on the Douglas DC-3's default gauges for instrument fidelity. Enrique Medal updates the panel, available as BOSTONMKIII.ZIP or ALPHBST9.ZIP.

: 610.41 KB
: 415
: 3

Views for AgustaWestland EH101 Acc. P

By Marc Renaud, the work updates camera definitions for the AgustaWestland EH101 Acc. P, adding 13 plus 1 cameras and a total of eight (seven) cockpit views, including separate definitions for flying and missions. It ships a camera definitions.txt and two PDFs, Available pdf and Top 20 pdf, for reference.

: 138.62 KB
: 393
: 3

Red Piper Cub Panel

A red panel complements the Piper Cub’s default red paint, offering a matched cockpit accent. By Andy Johnston, the entry lists two image files, Red-Piper-Cub-Panel-fsx1.jpg and Red-Piper-Cub-Panel-fsx1_medium.jpg, both in JPG format for reference to users.

: 662.68 KB
: 388
: 1