Germany

Page 2

Sort

Reset

EDFH

This EDFH Frankfurt-Hahn AFCAD for FSX realigns taxiway A, adds B1-B2 spurs, redraws aprons, lengthens runway 03/21 to post-2007 spec, and supplies extra Ryanair gates, GA slots and heavy-lift cargo pads; revised landclass, vehicle networks, signage and Acceleration-aware apron lighting optimise AI traffic logic for German regional and logistics flying.

: 204.6 KB
: 2.1K
: 1

EDDN Nurnberg

Focused on Bavaria’s EDDN Nürnberg, this FSX-only add-on substitutes the default concrete with the airport’s real mixed-surface texture, removes ghost strips, aligns the active 28/10 runway, and rebuilds the taxiway network so AI traffic reaches every stand—an AFCAD refresh that benefits German domestic hops, IFR approaches and VFR circuit practice alike.

: 18.1 KB
: 1.1K
: 5/5

EDRZ Zweibrucken And EDRP Pirmasens

Covering Rhineland-Palatinate’s former regional hub EDRZ Zweibrücken, with its 3,000 m asphalt 03/21, and the nearby grass strip EDRP Pirmasens, this Microsoft Flight Simulator X add-on scenery pack refreshes apron layout, taxiway signage, approach lights and GA stands via ADE-built stock and freeware objects, tuned for VFR Germany and AI traffic.

: 2.98 MB
: 1K
: 5/5

openVFR Germany POI

openVFR’s experimental Germany POI layer for FSX injects OpenStreetMap-based landmarks, accurate land-use polygons, full road and rail corridors, rivers and canals, giving VFR pilots additional geo-referenced cues across Bundesländer. Expect heavier GPU and CPU load due to dense autogen and draw calls, yet the result supports low-altitude sectional navigation and photoreal add-ons, useful for general aviation and helicopter touring.

: 1.24 MB
: 1K

RAF Laarbruch AB

FSX scenery package recreates the Cold-War era RAF Laarbruch Air Base (EDLV, ex-ETUL) in North-Rhine Westphalia near the Dutch frontier, supplying accurate taxiway geometry, 55+ coded parking spots, stock-based ADE X 1.50 layout, plus Jim Dhaenens’ shelter libraries for realistic HAS clusters—ideal for military ops, circuit practice and regional VFR planning.

: 4.52 MB
: 936
: 3/5
: 1

Fuhlsbuttel Airport

Covering EDDH Hamburg-Fuhlsbüttel for Microsoft Flight Simulator X, this scenery refreshes taxiway geometry, apron layouts, and terminal facades against Google Earth coordinates, adds ramp clutter and static equipment, aligns real-world AI parking codes (Air France at Pier 1, Lufthansa Pier 2), supports photoreal substrates, and integrates a custom landclass while maintaining stable FPS.

: 24.22 KB
: 815
: 2/5

Erding AB

Southern Germany’s Erding Air Base ETSE receives a revised AFCAD crafted in ADE 1.50, adding authentic German aircraft shelters, control tower, service buildings, full-length taxi routes and ample ramp parking for Microsoft Flight Simulator X; intended for default landclass and mesh, with compatibility to products like Ultimate Terrain Europe X unconfirmed.

: 3.75 MB
: 790
: 3/5
: 1

ETNG

ETNG Geilenkirchen Air Base for FSX and P3D refreshes NATO’s AWACS hub on Germany’s Dutch border with a rebuilt AFCAD: Bing-sourced apron layout, corrected taxiway geometry, expanded parking for E-3A, KC-135 and transient IL-76 traffic, integrated ground vehicle network, custom ATIS and spotter scenery.

: 536.33 KB
: 762
: 1

Rossfeld Glider Airfield

Placed atop the Rossfeld ridge south of Stuttgart, this FSX add-on reproduces the club-run glider airfield with sloped grass strip, photoreal woodland surroundings, custom 1 m terrain mesh, static sailplanes, animated windsock and parking for light GA up to 2 000 kg MTOW, enhancing thermal soaring and circuit training across Baden-Württemberg.

: 17.65 MB
: 722
: 8

ETNJ Jever AB

ETNJ Jever Air Base for Microsoft Flight Simulator X reproduces the former RAF and Luftwaffe fast-jet station on Germany’s North Sea fringe, offering accurate runway geometry, British-style HAS bunkers, full-length parallel taxi routes, generous AI parking and stock-library detailing—ideal for F-104G, Tornado, Phantom or GA circuit work and realistic military traffic.

: 1.63 MB
: 693
: 1/5
: 2

Wittmundhafen/Ostfriesland

Focused on Wittmundhafen Air Base in East Frisia, Germany, this FSX flight-sim add-on reproduces the coastal military aerodrome used by Jagdgeschwader 71 “Richthofen,” adding seasonal photoreal terrain, stock-library models, hardened shelters, fuel dumps and the full 2,440 m 08/26 strip for realistic Phantom II and NATO interceptor operations.

: 2.62 MB
: 596
: 4

Nordholz ETNM And Spieka EDXN

Covering Germany’s North Sea coast, this FSX add-on renders Nordholz ETNM—home of Marinefliegergeschwader 3 “Graf Zeppelin”—and neighbouring Spieka EDXN glider strip with reworked AFCAD, custom default-library objects, Guy Diotte assets, accurate runway markings, aprons, taxi nodes and surrounding autogen, tuned for VFR Germany West and default mesh.

: 4.46 MB
: 582
: 4

Bad Endorf-Jolling

FSX rendition of EDPC Bad Endorf-Jolling places the small Bavarian Alpine glider and GA strip accurately among Chiemsee’s lakes and foothills, presenting photoreal ground textures, annotated autogen, custom hangars, animated windsock, and seamless blend with VFR Germany South or default mesh—ideal for ridge-soaring or short-field pattern work around Upper Bavaria’s castles and villages.

: 12.47 MB
: 574
: 4/5
: 8

Kiel-Canal

This FSX add-on realigns Germany’s Kiel Canal (Nord-Ostsee-Kanal) with 42 m replacement bridges, precise exclusion rectangles, and refined flatten polys stretching up the Elbe and Weser toward Hamburg and Bremen, resolving default mesh quirks for smoother AI traffic, VFR routing, and waterway navigation.

: 336.78 KB
: 522
: 1

AFCAD For EDDS

Refines Stuttgart Airport EDDS in Microsoft Flight Simulator X with an updated AFCAD layout adding previously absent passenger gates, functional jetways, accurate apron parking orientations, and airline-specific codes, ensuring AI traffic follows correct taxi paths; built in FSXPlanner, this upgrade plugs neatly into default German scenery.

: 1.44 MB
: 504
: 2

Heringsdorf - 2013 X

Heringsdorf 2013 X AFCAD refresh for EDAH sharpens taxiway geometry, parking codes and navaid data for Captain7’s German Baltic hub; two optional BGLs span current civil traffic and a restored 1988–89 military apron, ensuring precise SID alignment and balanced AI flow across FSX and P3D platforms.

: 773.79 KB
: 301

EDKB

Updating the Bonn-Hangelar (EDKB) airfield in Germany, this revised AFCAD compiled with Airport Design Editor refines stand allocation, taxiway geometry, ATC frequencies and runway metadata for Flight Simulator X, aligning the virtual chart with current AIP plates and improving GA circuit traffic and AI flow.

: 5.15 KB
: 214

Airfield Moosburg

Moosburg auf der Kippe’s EDPI package for Microsoft Flight Simulator X brings a grass-runway general-aviation hub to the Bavaria scenery list, integrating an updated AFCAD, bespoke hangar and church objects, static C-152 and An-2 models, season-matched ground textures, and photoreal surroundings for accurate VFR circuit training near Munich.

: 360.93 KB
: 165
: 1/5
: 1

Duesseldorf EDDL Scenery Patch

Duesseldorf International EDDL receives an FSX-tuned scenery patch that realigns runway 05L/23R heading, redraws taxiway M-N-L revisions, adds 93 coded stands, updates apron markings and landclass, and synchronises lighting, blast fences and SkyTrain placement with current AIP charts, giving German flyers accurate AFCAD data and AI airline parking in Microsoft Flight Simulator X.

: 11.91 MB
: 4.5K
: 5/5
: 5

Munich International Airport (EDDM)

Routine hops into Bavaria become simpler with this FSX-native redesign of Munich International Airport (EDDM / MUC), built in ADE v1.45 for the stock terrain; revised AFCAD supplies extra stands, corrected gate codes, service-vehicle links, fuel truck spawns, illuminated helipad and authentic tower viewpoint, giving GA pilots and heavy liners a tidy, frame-friendly hub for domestic German and intercontinental routes.

: 49.86 KB
: 2.9K