FSX General Aviation Aircraft

Page 16

Filter

Reset

Sort

SIAI Marchetti SM 1019

Two variations exist, with one example in Italian Army service and a second variant adapted for civilian use after dismissal from the inventory. The aircraft preserves a single-engine, high-wing configuration with tail-wheel fixed gear, and uses a turboprop in place of the original piston engine, combined with redesigned tail surfaces for STOL performance.

: 3.99 MB
: 1.5K
: 6

Complete with Base Model

Cessna 206H

Registration N919ME anchors a Cessna 206H variant with a 3D model featuring animated parts and an updated cockpit with revised VC and 2D panels. Gauges by Gerd R. Nehr accompany the build, while Francois-Denis Guidee provides the original model and BONNE Roger contributes cockpit elements.

: 12.3 MB
: 1.5K
: 12

Complete with Base Model

Mooney M-18C

Three paint schemes accompany this Mooney M-18C Mite variant, which includes a virtual cockpit and holds a historical note as Al Mooney’s early production design from the late 1940s. Tim Conrad contributes the model, and it references a gauges file named cab.m18c for cockpit instruments.

: 9.45 MB
: 1.5K
: 2/5
: 4

Complete with Base Model

Rutan Q1 Quickie

Q1 Quickie v2 presents an improved variant of the original design, fixing exterior reflections and adding night lighting. It adopts a Rotax 50 hp two-stroke engine, with no internal oil system or gauges, and pilot toggling occurs through the engine controls housing while sunglasses switch on or off via the left armrest cushion.

: 22.33 MB
: 1.5K
: 4/5
: 4

Repaint for Payware Model

Flight Replicas Super Cub Extreme

Slotted for the Extreme model, this skin covers a 180 hp bush-type airplane with fixed gear and high-mounted wings, finished in a standard factory finish. By Joe Watson, a layered PSD is included to place numbers, with compatibility limited to the Extreme variant.

: 12 MB
: 1.4K
: 4/5
: 3

Complete with Base Model

Improved Extra 300

An updated Extra 300 variant adds new and improved FDEs by Charles Backus, including torque handling on takeoff and the ability to perform loops while landing at 55 knots; it also adds new cfg and air files and supports 200-knot speed, plus a short 10-second video of knife-edge flight.

: 441.49 KB
: 1.4K
: 2

Complete with Base Model

PZL M-15 Belphegor Updated Package

Two M-15 Belphegor aircraft appear, reflecting a 1970s-era Soviet jet-powered bi-plane designed for crop dusting. Credits include gauges by Vladimir Zhyhulskiy and a Rolls-Royce Avon-inspired sound by M. Cranston, plus thumbnail images, with a 2D panel and non-functional VC panels.

: 26.31 MB
: 1.4K
: 4

Complete with Base Model

Lake Renegade Update

By Bob Chicilo, the Lake Renegade 250 undergoes a flight-dynamics adjustment and a panel revision to better match the virtual cockpit, for use with the original RENGADE1.ZIP. Cruise at about 125 indicated now uses 18–19 inches of mercury manifold pressure, and cab files from default panel folders may appear as either .cab or zipped equivalents.

: 43.66 KB
: 1.4K
: 1

Complete with Base Model

USCG Cessna TU206

The Cessna 206 carries United States Coast Guard colors and centers on a TU206 turbocharged variant with a TSIO-520-C engine. Brian C. Selb provides a gauge fix for the 3D and 2D panels, while two other named options, P206 and TU206A, illustrate the lineage.

: 21.82 MB
: 1.4K
: 1

Complete with Base Model

Mini-Imp

The Molt Taylor Mini-Imp presents as a single -C variant powered by a 100HP Continental 0-200 engine, following its 1972 design by Molt Taylor and a rendition by Robert Kerr that includes a paint kit.

: 30.19 MB
: 1.3K
: 1/5
: 2

Complete with Base Model

Monster Energy Drink Waco

Monster Energy branding appears on a Waco in this converted design. Model input comes from Lynn Lyons and Bill Lyons, with credits assigned to David Grindele, and use relies on the 3D Light & Redux program to access the lighting codes.

: 5.43 MB
: 1.3K
: 5

Complete with Base Model

Cessna 404 Titan

By John B. Loney, Jr., this Titan variant centers on a base airframe enhanced with a v2 configuration, built with FSDS 2.10 and delivering animated control surfaces along with retractable landing gear. The cockpit panel follows the Baron 58 layout, aligning with a classic twin‑engine light aircraft heritage.

: 4.01 MB
: 1.3K
: 2

Repaint

Piper PA-18 Super Cub

Two variants by Mathias Wagner display D-EKIB and D-ELJH registrations for a Piper PA-18, with PA18_V3.ZIP compatibility, and are inspired by Graupner models. D-ELJH traces to a mid-70s radio-controlled kit with a 1.2 m span, while D-EKIB stems from a rubber-powered free-flight kit with a 540 mm wing.

: 2.09 MB
: 1.3K
: 5/5
: 2

Repaint

BAE Systems CT4 Airtrainer

Tamworth hosts a CT4 trainer operated by BAE Systems for ZK-CAV, a New Zealand-made aircraft that exists in a B variant and a modified E version that shares the nose with the E and outperforms the B. It features custom animations, gauges, and textures by Frat Bros Design and is associated with the BAECT4V1_1.ZIP.

: 4.42 MB
: 1.3K
: 1

Complete with Base Model

Blue And White Moo's Mooney Acclaim

The Acclaim variant, derived from the Bravo, is developed by Mark Fire Ball Rooks and Mary Moo, reflecting Mooney’s single-engine design. Flight dynamics are tuned to boost climb rate and cruise speed, while a blue-and-white motif on the fuselage emphasizes sleek contours, and an included custom sound option lets users revert to the Bravo audio.

: 15.59 MB
: 1.2K
: 1

Complete with Base Model

Aeronca Chief

An Aeronca Chief, developed in 1945 as a side-by-side variant of the Champion, stands as a native project compiled with Xtomdl SP-2 into SP-2. The cockpit hosts animated controls and working gauges, while light bump mapping on fasteners and reflective glass add subtle realism.

: 1.2 MB
: 1.2K
: 2

Repaint for Payware Model

Transport Canada Cessna 206 Bush

A Bush amphibian variant of the Cessna 206 Stationair is presented, modelled by Carenado with a Transport Canada finish. It features custom exterior, bump maps, spec maps and panels, carries atc_id C-GCFH and ui_type C U206G Stationair 6 II with ui_variation TCA, and lists David Wilson for the appearance work.

: 6.88 MB
: 1.2K
: 1

Repaint for Payware Model

HM Aerospace DA40 TDI Diamond Star /W G1000 Panel

Langkawi Island-based HM Aerospace operates a Diamond Star DA40 TDI with a G1000 panel, tied to AB_PtC_Diamond_DA40_TDI. The ATC ID is 9M-HMJ and the variation carries the HMA 9M-HMJ designation, reflecting the academy's registration for cadet training.

: 4.42 MB
: 1.2K
: 1

Complete with Base Model

Nardi FN-333 Riviera

The Nardi FN-333 Riviera is an amphibian with high-wing design, double tailfin, and a reversible pusher propeller that seats four including the pilot. By Mario Noriega, it includes animated landing gear, dampers, doors, and control surfaces with a dynamic clickable cockpit, and references FN333_check.htm, FN333_ref.htm, and panel_FN333.htm.

: 14.65 MB
: 1.2K
: 5/5
: 7

Repaint for Payware Model

Cessna C185F Tundra - Jim Tweto N91361

Registration N91361 anchors a C185F tundra variant associated with Era Alaska, flown by Jim Tweto, bearing the label TUNDRA N91361. It supports Carenado's tundra model of the Cessna C185, and a reference file named N91361.jpg accompanies the listing.

: 18.51 MB
: 1.2K
: 5