FSX AFCAD Files

Page 27

Sort

Reset

KBUF

Buffalo Niagara International Airport in New York carries the KBUF designation and employs Airport Design Editor v1.32 to generate a corresponding .bgl file. The .bgl format reflects data crafted with that editor for this airport.

: United States of America
: 8.69 KB
: 127
: 4/5

KSBP

Two compiled BGL files, KSBP_CSS.BGL and KSBP_CSS_CVX.BGL, originate from Airport Design Editor and refine the layout of San Luis County Regional Airport (KSBP) in Southern California’s Central Coast region. The updates aim to faithfully capture the airport's unique configuration for operators observing the area.

: United States of America
: 11.41 KB
: 126

ADE File For EGLC

At EGLC in the UK, taxiways and the terminal receive updates, while ground imagery drawn from Google Earth is applied to the field. Kai P. Kamjunke credits the work, noting several airport objects are placed and a new landclass surrounds the facility.

: United Kingdom
: 7.38 KB
: 126

KCDK

Two BGL files by Art Poole relocate Lewis Airport at Cedar Key, Florida to the correct location so it sits on land instead of water. The files KCDK_ADE_AP.BGL and KCDK_ADE_AP_CVX.BGL are freeware and can be removed to revert.

: United States of America
: 4.53 KB
: 124
: 5/5

Norfolk International Airport

At KORF in Virginia, the KORF bgl file corrects gate numbers and letters and adds three gates to Concourse A, enabling AI traffic to pass through those positions, by Dusty Bizub. It also resolves previously incorrect designations to better reflect the terminal layout.

: United States of America
: 9.1 KB
: 122

Hampton Roads Airport

Dusty Bizub delivers a Virginia airfield identified as KPVG, expanding the region with several new gates and a taxiway that reaches runway 28. This is the creator’s fourth project, and the author uses the file name KPVG.

: United States of America
: 3.63 KB
: 122

AFX File For KELP

By Steve Lewis, this AFX file dedicated to El Paso's KELP re-creates the apron with airline and cargo parking stands mapped to layouts. It relies on Airport Design Editor (ADE) by Scruffyduck Software and data from Google Earth, the airport’s official data, and Flight Aware to position gates and ramp spots, following ProjectAI radius standards.

: United States of America
: 177.09 KB
: 118

AFX File For KMHT

Focusing on Manchester Airport (KMHT) in New Hampshire, Jim Cook applies an AFX-enhanced layout that designates airline-specific gates and cargo parking for an authentic ground feel. The adjustment uses the AFX_KMHT_JC.bgl and remains compatible with Ultimate Terrain X, Ground Environment X, and World of AI traffic.

: United States of America
: 18.37 KB
: 116

AFCAD For EHTW

Twenthe Airport near Enschede, a decommissioned air base, is represented with a data file edited using ADE to supply updated gates, parking spots, and taxi paths. The package relies on a BGL format and enhances runway markings and apron geometry for accurate ground movement in the sim.

: Netherlands
: 53.18 KB
: 115
: 1

Newport News

Dusty Bizub presents a second enhancement for Newport News/Williamsburg International, adding gates and reassigning and renumbering existing spots to mirror real-world layouts. It aligns gate numbers with charts and refines transitions between parking areas and taxiways, while updating signage to support smoother ground movements.

: United States of America
: 8.77 KB
: 114

KRDD

Clear Sky Simulations presents two BGL files, KRDD_CSS.BGL and KRDD_CSS_CVX.BGL, compiled via Airport Design Editor to rework taxiway widths and ramp designations at Redding Municipal Airport (KRDD) in Northern California, incorporating vegetation and structural objects drawn from default libraries for cohesive integration.

: United States of America
: 13.15 KB
: 113

KSFZ

At North Central State Airport in Pawtucket, Rhode Island, operators modify taxiway widths to mirror real dimensions, while static aircraft populate the ramp and hangars replace the default structures. The file also adds auto parking, fuel trucks, and GA parking, and seagulls appear in the area, using stock objects with no extra library required.

: United States of America
: 6.95 KB
: 113
: 5/5

AFX File For KGSP

An AFX asset targets KGSP, Greenville Spartanburg International Airport near Greer, South Carolina, adding jetways and placing airline gates such as A6 and A7 at the rear terminal. It also ensures AI traffic spawns at the right gates, adds the Fedex cargo terminal, and updates taxiway outlines with new vehicle paths, by Duke Defouw.

: United States of America
: 27.31 KB
: 113

AFCAD For EHTE

Teuge Airport (EHTE) in the eastern Netherlands receives a revised layout by Joost de Wit, created with Airport Design Editor (ADE) to accommodate a relocated fuel station. Two BGL files are included and reflect ADE-generated geometry.

: Netherlands
: 70.03 KB
: 112
: 1

4TA2

At Kenneth Copeland Airport in Fort Worth, Texas, this v1 modification reworks runway layouts and adds aprons, buildings, and other objects for the default layout. It comprises two BGL files, 4TA2_ADEX_AJJC_CVX.bgl and 4TA2_ADEX_AJJC.BGL, and tests with multiple traffic packages including PAI, WOAI, Ultimate Airport Environment X, FTX AU Traffic V.200, and custom traffic.

: United States of America
: 110.39 KB
: 111
: 1

EHSE

Seppe Airport (EHSE) in the southern Netherlands receives an updated version 2.0 by Joost de Wit, for a small GA airfield. This edition displays the runway ident correctly, and two bgl-files accompany it for reference.

: Netherlands
: 66.28 KB
: 111
: 1

AFCAD For EHWO

Two .bgl files drive the Woensdrecht Airport refinement, with Joost de Wit using ADE techniques to refine taxiway alignments, runway pathways, and parking allocations. This configuration aligns closely with on-site facilities and supports AI traffic flows.

: Netherlands
: 106.54 KB
: 111
: 1

McCarran Int'l Airport Default Scenery Update

Two BGL files, FSX_klas.BGL and FSX_klas_cw.BGL, target the McCarran International Airport in Nevada for the default airport layout, with FSX_klas_cw.BGL activating Xwind runways. It also extends the vehicle road to the GA aprons and adds extra parking for SWA.

: United States of America
: 54.31 KB
: 110

KSTS

Two main BGL files, KSTS_CSS.BGL and KSTS_CSS_CVX.BGL, rework taxiways, ramps, and position data for Charles M. Schulz – Sonoma County Airport (KSTS) near Santa Rosa, with terrain control provided by the CVX file. It uses Airport Design Editor and relies on default libraries for buildings and hangars, and appears when graphics settings reach Normal.

: United States of America
: 12.09 KB
: 109

KMHT

Jim Cook models the KMHT - Manchester-Boston Regional Airport - Manchester, NH file for Manchester, New Hampshire, aligning the airport reference with the locator. Manchester, New Hampshire remains the geographic focus, and Jim Cook receives credit as creator.

: United States of America
: 5.41 KB
: 108