Spain

Page 2

Sort

Reset

Palma De Mallorca

Palma de Mallorca LEPA for Microsoft Flight Simulator X refreshes the default Balearic hub with re-allocated gates, revised taxiway links, rebuilt service roads, added fuel bowsers and expanded parking stands crafted in ADE; tower-roof camera spots preserved, AI-traffic friendly, zero payware dependencies, a neat fit for Ultimate Traffic or WOAI schedules.

: 16.69 KB
: 460

Isla de Alboran

Covering Spain’s remote Isla de Alborán, this FSX scenery add-on reshapes the pancake default into a flat yet landable bush strip, complete with heliport IOAL, 519 kHz ADF beacon, seaplane mooring and the island’s sparse barracks and jetty. Optimized for VFR hops across the western Mediterranean, suitable for helicopters, STOL props and amphibians.

: 265.51 KB
: 356
: 5

Barcelona El Prat Airport

Barcelona–El Prat (LEBL) for FSX gains a practical face-lift with revised aprons, accurate runway profiles, upgraded taxiway signage and an AFX layout that synchronizes AI traffic and parking; refreshed textures refine ground polys and terminals while staying FPS-friendly for VFR, IFR, IVAO or VATSIM operations within Spain.

: 6.75 MB
: 8.2K
: 5/5
: 20

Malaga Airport

For Spain's catalogue, this FSX rendition of Malaga–Costa del Sol Airport (LEMG/AGP) adds runway 12/30, dual north- and south-flow AFCAD variants, updated taxiways, stands and nav-aids compiled in ADE from AENA plates and current satellite imagery, refining SID/STAR alignment for realistic IFR approaches along the Costa del Sol.

: 1.6 MB
: 5.8K
: 4/5
: 2

LEBL Update

Barcelona El Prat International (LEBL) receives a revised AFCAD scenery upgrade for Microsoft Flight Simulator X, crafted with ADE by Ray Smith, adding simultaneous triple-runway capability via crosswind logic, SID/STAR-aware runway allocations, wide-body stands at both terminals, refreshed taxiway signage, new ground vehicle routes, updated control-tower object and optimized AI traffic sequencing.

: 837.47 KB
: 3.5K
: 5/5
: 5

Madrid/Barajas Airport

Updated Madrid–Barajas (LEMD) for FSX lands on the Spain scenery list with reordered gate numbers drawn from current AENA charts, extra ramp positions, accurate airline codes for AI operations—so Iberia confines to T4/T4S—and dual-sided PAPI-4 for every runway, providing cleaner approach cues and realistic ground traffic flow.

: 33.72 KB
: 2.4K
: 3/5

Scenery--Balears

Covering Mallorca, Menorca, Ibiza and Formentera, this FSX scenery pack renders the Balearic archipelago in photoreal resolution for VFR touring, layering 230 hand-placed towns, seven historic monuments such as Cartuja de Valldemossa and Lluc Monastery, custom autogen, and precisely aligned regional airports—an upgrade refined from the widely downloaded FS2004 edition.

: 18.4 MB
: 1.7K
: 1

Mahon/Menorca Island

FSX and Microsoft Flight Simulator X users exploring Spain’s Balearic archipelago will find this Mahón–Menorca (LEMH) scenery brings the island hub’s taxiway geometry, high-speed exits, terminal footprint and separate GA apron in line with current charts, employing ADE-authored AFCAD, default object libraries and Ultimate Terrain Europe compatibility for an understated yet faithful airport environment.

: 8.78 KB
: 1.6K

Barcelona El Prat Airport (LEBL)

Targeting FSX pilots, this AFCAD-grade scenery addon for Spain’s Barcelona–El Prat Airport (LEBL) replaces stock data with runway 02 ILS/DME BLT, CLE and VLA VORs, LESBA-RUBOT-RULOS-VIBIM IAFs, plus fully coded VOR/DME and ILS procedures, enabling GPS and ATC-controlled arrivals, departures and missed-approach flows at Catalonia’s primary hub.

: 32.18 KB
: 1.6K
: 5/5

Madrid Barajas International Airport

Refines LEMD Madrid-Barajas for FSX with an updated AFCAD: added parallel taxi lane, slightly stretched 18R/36L, 18L/36R, 14R/32L, 14L/32R for heavy-jet performance, enables simultaneous departures and arrivals on all four strips, and allocates realistic airline-coded gates—including dual A380 stands—for Iberia, Air Europa, Vueling, oneworld traffic.

: 161.96 KB
: 1.2K

San Javier

Covering Aeropuerto de Murcia–San Javier (LELC) for Microsoft Flight Simulator X, this add-on recreates the 2011 layout with the 1 577 m military runway 05L/23R, revised taxiway geometry, new control tower, expanded stands, ILS and ABN, fuel and fire service zones, GA and cargo aprons plus AI-ready parking.

: 10.27 MB
: 1.1K
: 1/5
: 1

Scenery--CanarFsX

CanarFsX enhances Microsoft Flight Simulator X with high-resolution orthophoto coverage, custom elevation mesh and refined autogen for the entire Canary Islands chain—from Lanzarote to El Hierro—supporting precise VFR navigation and reliable IFR procedures with updated navaids, detailed coastlines and accurately placed airports.

: 31.44 MB
: 1K
: 1/5
: 10

CanarySim's Xporter

FSX pilots wanting thorough Canary Islands scenery coverage can employ CanarySim’s Xporter to migrate the respected Project Canarias 2006 package—airports like GCLP, GCFV, GCXO, layered volcanic terrain mesh, coastal photoreal textures and tailored autogen—straight from FS2004, maintaining seasonal texture sets, accurate landclass and elevation fidelity throughout Microsoft Flight Simulator X.

: 2.65 MB
: 1K

Ceuta-Algeciras

Covering Spain’s Ceuta enclave and nearby Algeciras across the Strait of Gibraltar, this FSX package introduces both heliports (GECE, LEAG) with custom pads, refined coastline vectors, high-resolution terrain mesh, hand-placed autogen, photoreal urban textures, night environment and AI ferry traffic, supporting realistic rotor-wing shuttle ops and coastal VFR navigation in Microsoft Flight Simulator X.

: 65.46 MB
: 1K
: 4

Catalonian Coast

FSX Catalonian Coast v1.0 refines Spain’s northeast shoreline within Microsoft Flight Simulator X, supplying redrawn vector coasts, 61 coastal settlements, 123 beaches and 59 detailed marinas from Barcelona to the French border; upgraded landclass, waterclass and photoreal BGL layers deliver accurate bathymetry, clearer VFR reference points and stable frame rates.

: 1.68 MB
: 823
: 4/5
: 9

19 M Balearic Terrain Mesh

19 m digital elevation mesh for the Balearic Islands refines FSX’s default relief, rendering Mallorca, Menorca, Ibiza and Formentera with sharper ridgelines, accurate coastal escarpments and smoother altitude transitions; ideal for low-level VFR circuits, heli ops or IFR departures reliant on precise terrain clearance, outperforming legacy SRTM data.

: 1.48 MB
: 756
: 1

Cuatro Vientos Airport

Cuatro Vientos Airport scenery for Microsoft Flight Simulator X recreates Madrid’s historic LECU field with revised parking stands, proper 09/27 runway geometry, realistic taxiway naming, custom general-aviation hangars and nav-aid data derived from AENA charts and Google Earth, ideal for Spain-centric VFR circuits or flight-school sessions.

: 10.5 KB
: 735

LELL

Covering Sabadell Aerodrome (LELL) near Barcelona, this ADE-compiled AFCAD refreshes the default FSX layout with accurate runway parameters, complete taxiway geometry, new aprons, distinct helicopter pads, realistic parking stands, corrected autogen exclusions, plus added structures, perimeter fencing and signage—ideal for VFR circuits and the accompanying single-engine AI package.

: 498.13 KB
: 732
: 2

Barajas Int'l Airport

Updated FSX rendition of LEMD – Adolfo Suárez Madrid-Barajas brings two discrete BGLs: a standard dual-runway layout and a crosswind-enabled four-runway setup. Expect re-numbered gates, corrected jetways, rebuilt service roads, extra fuel bowsers, refined taxiway geometry and tower-roof viewpoint, ensuring AI traffic flows realistically across Spain’s busiest hub.

: 110.05 KB
: 721

LEPA

FSX flyers updating Spanish hubs may want this AFCAD revamp of LEPA — Palma de Mallorca Son Sant Joan International in the Balearic Islands — offering corrected taxiway geometry from satellite data, realigned Air Berlin parking, extra cargo ramps, service vehicles and optional Jim Dhaenens light objects, improving AI flow and ramp realism without touching default mesh.

: 20.72 KB
: 701