FSX Scenery

Page 43

Sort

Reset

Kansai Int'l Airport

On a reclaimed island off Osaka Bay, the addition aligns terminals, aprons, and gates with real coordinates using satellite references. The RJBB_IanW folder anchors the project; the second runway appears partially completed to reflect the period, and optional features add ground vehicles when extras are present, with other Ian W. works including RJOA-Hiroshima and RJOS-Tokushima.

: Japan
: 775.99 KB
: 2.5K
: 4/5
: 3

Kadena AB And Okinawa Islands

By Ian W, this freeware depiction covers Kadena AB (RODN) and five Okinawa airstrips, naming Yoron Island (RORY), Iejima (RORE), Aguni (RORA), Kumejima (ROKJ), and Kerama (ROKR). A flight plan runs from Yoron to Kadena and is provided in two formats, with the Kadena_&_Okinawa_Islands folder included.

: Japan
: 1.27 MB
: 2.5K
: 4/5
: 4

Scenery--Berlin Landmarks

Edgar Knobloch fixes the location and size of several Berlin buildings in Germany, with the changes captured in berlfsfx.gif, a GIF file used to illustrate the adjustment, which targets the urban geometry for better alignment with the city's layout.

: Germany
: 4.43 KB
: 2.4K

Table Mountain

Created by Domonique Dantu, this mesh refinement sharpens Table Mountain’s silhouette and elevates terrain fidelity over the Cape Town area, offering a clearer sightline on low-altitude approaches. It integrates with other regional add-ons and requires only default mesh settings, with no extra libraries needed.

: South Africa
: 13.43 MB
: 2.4K
: 1

BSG Galactica at PHNL

A stock aircraft carrier sits offshore near Honolulu, identical to the San Diego variant, while a landable Battlestar Galactica sits above the carrier at 27,500 feet, offering a clear reference point for the scene in this setup.

: United States of America
: 1.46 MB
: 2.4K
: 4/5

Caribbean Seaplane Tours Florida

An aircraft environment add-on covers a network of Florida and Caribbean aviation sites, spanning Key West, Miami, Havana, Marathon and beyond. By Chris Carel, it lists 19 navigation locations with VOR references and fuel availability, and includes several aircraft designs across docks such as Key West Docks and Mooney Harbor.

: Global (World)
: 68.47 MB
: 2.4K
: 5/5
: 40

Melbourne Int'l Airport

A Melbourne International layout by Ray Smith presents two BGL configurations, YMML_ADE_RS.BGL and YMML_ADE_CW_RS.BGL, plus YMML_ADE_OBJ.BGL that must accompany either option. The crosswind edition activates Runway 9/27 with Runway 16/34 and adds PAPI on both runways, while the default preserves a single runway and applies the same airport updates.

: Australia
: 47.07 KB
: 2.4K
: 5/5

Rome Ciampino Airport

An Italy-based depiction of Ciampino Airport (LIRA) relies on Google Earth imagery and bears the credit of Gianluca Mastrascusa. Two BGL files accompany the work, enabling the representation of Ciampino Airport within Italian airspace for regional use.

: Italy
: 70.33 KB
: 2.4K
: 4/5
: 1

SRTM Mesh For Australia

Thomas Trewin provides an SRTM terrain mesh covering Australia, New Zealand and PNG that updates the default landscape data with higher resolution. It uses the latest data available and fixes voids where possible, and this file counts as 1 of 4.

: Global (World)
: 283.21 MB
: 2.4K
: 5/5
: 1

Scenery--Raleigh-Durham International

KRDU2010 represents the airport as it would exist around 2010, using the registration KRDU in North Carolina. By Ignacio Villegas, it depicts custom Gmax models of terminals, hangars, and the FAA tower, delivering added visual detail.

: United States of America
: 7.53 MB
: 2.4K
: 1/5
: 2

Clemenceau Carrier

By Sylvain Parouty, this v2 model recreates a 1990s Clemenceau carrier with dual catapults, jet blast deflectors, and arrestor wires, designed for FSX Acceleration. Install uses VEH_Clemenceau V2.0 and 2048x2048 flight-deck textures converted to DDS without mipmaps, with optional 1024 textures; it hasn’t been tested for RTM/SP1 or FS9 and includes animated deck procedures.

: France
: 10.29 MB
: 2.3K
: 1

British Columbia Float Bases

Coastal BC seaplane bases are built with default objects, drawing on Google Earth and the Canada Water Aerodrome Supplement, a project by Chris Peschke. The collection requires Ultimate Terrain Canada and a SRTM mesh to ensure Fraser River elevations are correct.

: Canada
: 183.98 KB
: 2.3K
: 3/5
: 1

RAF Mount Pleasant

This depiction of RAF Mount Pleasant (EGYP) in the Falklands includes hangars, shelters, workshops, accommodation, and a night-lit magazine area. Layout based on Google Earth data from 2006; the airfield sits on a flat surface with ADE9X blending, 3 combat parking spots and 4 cargo bays.

: Falkland Islands (Malvinas)
: 12.07 MB
: 2.3K
: 5/5

King Shaka International

King Shaka International Airport sits at La Mercy, 35 kilometers north of Durban, and is expected to open May 1, 2010, replacing Durban International Airport. It supports AI flight plans and aircraft, and FALE version 1.0 is provided, with AI work credited to Mundus Yssel and Pierre Cornelissen.

: South Africa
: 29.57 KB
: 2.3K

Gold Coast Airport

An accurate depiction of the Gold Coast region airport YBCG in Australia, this rendition notes a 2500-meter runway upgrade and a widened apron. Coastline changes extend beaches to Byron Bay and a canal network behind Surfers Paradise, while all models use Gmax or FSDS3.0 by John Ross.

: Australia
: 12.26 MB
: 2.2K
: 2/5

Liverpool

By Gareth Davies, this Liverpool city-center depiction aligns with the Ultimate Terrain Europe addon and covers most major buildings, including the Bidston Hill Telescope on Wirral; it has not been tested with the default or VFR terrain.

: United Kingdom
: 9.1 MB
: 2.2K
: 5/5
: 1

Albuquerque International (KABQ)

At Albuquerque's KABQ, a higher-resolution terminal accompanies new tarmac lighting and jetways, while two large hangars at the end of runway 8 and the Wyndham Hotel remain visible. Files include 000_excl.bgl, KABQ.bgl, KABQ_Scn.bgl, and KABQ_LC.bgl; an LTS file is required for the lights, original by Kevin Troutman, revision by Grant G.

: United States of America
: 1.26 MB
: 2.2K
: 5/5
: 1

RAF Marham 1993

John Young of the Airfield Construction Group presents a RAF Marham airfield layout in the United Kingdom circa 1993, designed for use with Victor AI resources and Canberra AI resources, aligning with the Victor K2/Tornado GR1 era and delivering detailed, frame-rate friendly performance.

: United Kingdom
: 76.1 MB
: 2.2K
: 4

Bradley International Airport

Bradley airport (KBDL) in Windsor Locks, CT gains a remapped gate layout with an extended A-Concourse and added jetways, plus a Marriott hotel, parking structure, and an old control tower nearby, while three BGL files: KBDL_NEW_J.bgl, IS_KBDL.bgl, and JonPatch_objects_2, provide the updated configuration, with JonPatch_objects_2 supplying light-pole library objects.

: United States of America
: 698.97 KB
: 2.2K
: 3

Bristol International Airport (EGGD)

The airfield near Bristol in the UK, designated EGGD, is modeled with Gmax for buildings, ADE9X for taxiways and gates, and samm for static aircraft. Static aircraft and 2D passengers and ground staff accompany a terminal, plus photoreal runway surfaces; the BristolX folder is included, by Harry Patten.

: United Kingdom
: 29.13 MB
: 2.2K