Skip to content
X-Plane 6 min read

How do I install and configure X-World in X-Plane 12?

Adam McEnroe
In short

Learn how to install SimHeaven X-World in X-Plane 12, set the correct scenery order, add its library and fix missing buildings or trees.

To install SimHeaven X-World in X-Plane 12, extract the complete regional package, place its numbered scenery folders and required vegetation library directly in Custom Scenery, then order the X-World layers above orthophotos and mesh but below airports. Keep the package's numbered layer order unchanged.

What files do I need for SimHeaven X-World?

You need the complete X-World package for your chosen region and the shared X-World vegetation library required by that release. If the regional download is split into several archive volumes, every volume must belong to the same package version.

X-World is an overlay, not photographic ground imagery or replacement terrain. X-Plane 12 Global Scenery or a compatible orthophoto base mesh must still cover the area underneath it. Several regional X-World packages can coexist, but the shared vegetation library should be installed only once.

Do not enable X-World and an older regional overlay such as X-Europe over the same tiles. Both can place buildings, forests and roads, resulting in duplicates and unnecessary loading.

How do I install SimHeaven X-World in X-Plane 12?

The installation consists of extracting every archive volume as one package and putting each resulting X-World layer at the top level of Custom Scenery.

  1. Close X-Plane 12. Scenery files and scenery_packs.ini should not be changed while the simulator is running.
  2. Collect all archive volumes. Keep multipart files together in one temporary folder. Extract the first volume with a multipart-compatible archive tool; do not extract each segment separately.
  3. Check the extracted structure. The result should contain several separately numbered X-World folders. If they are hidden inside an extra download folder, move the actual scenery folders instead. Our advice on checking an extracted scenery package's real root folder explains this common mistake.
  4. Copy every numbered regional folder. Put them directly inside X-Plane 12/Custom Scenery. Do not combine their contents or install them under Resources.
  5. Install the vegetation library. Place the library folder directly in Custom Scenery. If its documentation includes a platform-specific setup or link script, run the script for your operating system exactly as instructed. See our guidance on installing and checking shared scenery libraries if X-Plane reports missing assets.
  6. Start X-Plane once, then exit. This allows the simulator to discover the new folders and write entries to scenery_packs.ini.
  7. Correct the scenery order. Open Custom Scenery/scenery_packs.ini in a plain-text editor and arrange the packages as described below.
  8. Restart and test the region. Load both a built-up area and a rural tile. This checks buildings, forests and roads rather than relying on one airport view.

What is the correct X-World scenery order?

X-World belongs below airports and above every orthophoto or base-mesh package. Within X-World itself, list the numbered folders in ascending order from top to bottom, so the layer beginning with 0 sits above 1, 1 above 2, and so on.

Priority in scenery_packs.iniPackage typeReason
HighestAdd-on airports and Global AirportsAirport exclusion zones must be able to suppress X-World objects.
MiddleX-World numbered regional layersKeep the supplied numerical sequence unchanged.
LowerOrthophoto tiles and other base meshesX-World objects, forests and networks must render over the terrain.
No draw priorityShared librariesLibraries provide assets rather than visible terrain, but they must remain enabled.

New scenery is often inserted near the top of scenery_packs.ini, so the automatically generated order is not necessarily correct. Do not alphabetically sort the entire file. For the rules governing airports, overlays and meshes, use our detailed explanation of X-Plane 12 scenery priority.

Recommended X-World configuration

Start with every supplied layer enabled and adjust X-Plane's graphics settings before removing scenery components. X-World does not normally need a separate plug-in or an in-simulator configuration panel.

  • Object performance: reduce the world-object density setting first if dense cities cause poor frame times.
  • Forest performance: lower vegetation density if heavily wooded tiles are the main problem.
  • Optional detail: test optional VFR, extras or detail layers one at a time if the package documentation identifies them as optional.
  • Temporary testing: change the relevant entry to SCENERY_PACK_DISABLED rather than deleting its folder. Restart X-Plane after each change.
  • Core layers: keep the exclusions and main scenery layers enabled unless you are diagnosing a specific conflict. Disabling exclusions commonly produces duplicate autogen.

Can X-World be used with orthophoto scenery?

Yes, X-World works well over terrain-only orthophoto scenery when all X-World layers sit above the orthophoto package. Our orthophoto installation and layering guide covers the required base-mesh placement.

Avoid running another autogen, forest or road overlay over the same tiles. Orthophoto imagery itself is compatible; the duplicate overlay data sometimes bundled with it is what causes doubled buildings, excessive trees or competing road networks.

Why is X-World missing or showing errors?

Most X-World failures come from an incomplete multipart extraction, a nested folder, a missing vegetation library or incorrect scenery priority. Check Log.txt immediately after the affected flight because its first relevant scenery error usually identifies the package or missing asset.

SymptomLikely causeFix
Red scenery-loading warningIncomplete archive or missing library assetConfirm every archive volume was present, extract again and rerun any required vegetation-library setup.
No X-World buildings appearNested folders, disabled entries or a mesh placed above X-WorldCheck the folder depth and move the complete X-World block above all base meshes.
Duplicate buildings or forestsAn older X-World release, X-Europe or another overlay remains enabledDisable the overlapping package rather than trying to change the relative order.
Buildings or trees cover an airportThe airport is below X-World, or the airport lacks suitable exclusionsMove the airport above X-World. If the problem remains, the airport package needs corrected exclusion zones.
Vegetation is missingThe shared library is absent, its setup link points to another X-Plane installation, or vegetation density is too lowVerify the library installation and raise vegetation density for a controlled test.
Roads do not match imageryThe road data and photograph were produced from different source datesThis is not necessarily an installation fault. Disable the optional road or network layer if the mismatch is distracting.

Updating X-World safely

Remove the old numbered folders for that region before installing a replacement release. Merging a new package into the old folders can leave obsolete files behind and create errors that scenery ordering cannot fix.

Update the shared vegetation library when the replacement package requires it, then let X-Plane scan the folders again. Recheck scenery_packs.ini for old package names and restore the airport, X-World and mesh priority if necessary.

AI Assistant New

Still stuck? Ask Fly Away

Ask Fly Away is our AI flight-sim assistant. Ask your exact question and get a direct, step-by-step answer in seconds — free to try.

Ask Fly Away Free preview · unlimited for PRO members