Skip to content
X-Plane 5 min read

How do I install SimHeaven X-World in X-Plane 11?

Adam McEnroe
In short

Learn how to install SimHeaven X-World in X-Plane 11, choose the compatible package, set load order, add libraries and fix missing scenery.

Install SimHeaven scenery in X-Plane 11 only from an archive explicitly marked for X-Plane 11; X-World packages made for X-Plane 12 are not drop-in compatible. Extract every numbered regional layer into Custom Scenery, install its documented libraries, then place the layers below airports and above orthophoto or mesh scenery in scenery_packs.ini.

The version distinction matters. Some X-Plane 11 releases use regional names such as X-Europe or X-America rather than X-World. If the supplied documentation lists only X-Plane 12, do not force that package into X-Plane 11; follow our separate installation procedure for the X-Plane 12 edition instead.

How do I install the X-Plane 11 package?

The safe method is to preserve the package's folder structure and install every required layer from the same compatible release.

  1. Confirm the simulator version. Check the archive description and included instructions for an explicit X-Plane 11 compatibility statement. The product name alone is not enough.
  2. Extract the complete archive. If it is supplied in several volumes, put every volume in one directory and extract the first or main part once. Extracting each part separately can create incomplete or duplicate scenery folders.
  3. Move the numbered folders. Place each extracted SimHeaven layer directly inside X-Plane 11/Custom Scenery. Do not leave them inside an extra download or regional wrapper folder. Opening a layer should reveal its scenery files and folders immediately.
  4. Install the documented dependencies. Use only the libraries specified for that XP11 release, including any matching vegetation library. Our scenery-library installation guidance explains the correct folder structure. Do not substitute a similarly named XP12 library unless its documentation confirms XP11 support.
  5. Let X-Plane register the scenery. Start X-Plane 11, wait until the main menu appears, then quit. X-Plane will add newly detected packages to Custom Scenery/scenery_packs.ini.
  6. Edit the load order. Back up scenery_packs.ini, then arrange the entries as described below. Every required line must begin with SCENERY_PACK, not SCENERY_PACK_DISABLED.
  7. Test inside the covered region. Load a location away from an airport boundary and set Number of World Objects high enough to display dense scenery. Restart X-Plane after changing package entries.

SimHeaven scenery has no separate plugin control panel. In X-Plane 11, configuration means choosing the active regional layers, maintaining their load order and adjusting the simulator's object-density setting.

What is the correct scenery_packs.ini order?

X-Plane reads the top of scenery_packs.ini as the highest scenery priority, so airports must remain above SimHeaven and terrain must remain below it.

PositionScenery typeReason
TopCustom airports and airport enhancementsPrevents regional buildings and objects from overriding airport scenery.
Below custom airportsGlobal AirportsKeeps default airports above regional overlays.
MiddleSimHeaven regional layersProvides buildings, forests, landmarks, roads and other overlay content.
BottomOrthophoto base tiles and replacement meshSupplies the ground imagery or terrain beneath the overlays.

Keep the SimHeaven block in the order specified by its included instructions. Where folders have numeric prefixes, that normally means ascending order from top to bottom, such as 1, 2, 3 and onward. Layer names and counts differ between releases, so do not rename folders or copy an ordering list from a different version.

Library packages normally just need to be present and enabled; they are not visual base scenery. Check the file again after installing another add-on because X-Plane places newly discovered packages near the top.

Can SimHeaven scenery be used with orthophotos?

Yes. SimHeaven is primarily an overlay, while orthophoto packages provide imagery and usually a base mesh, so the SimHeaven layers belong above the orthophoto tiles.

Avoid enabling two large overlays that both generate roads, forests and buildings for the same area, as that can produce duplicate objects and hurt performance. Keep the orthophoto base, choose one main regional overlay, and retain airport-specific additions only where needed. Our guide to overlay and mesh priority in X-Plane 11 explains why only one base mesh wins for each tile.

Why is SimHeaven scenery missing in X-Plane 11?

Missing SimHeaven scenery is usually caused by an incompatible package, an extra folder level, a disabled entry or an absent library.

  • Wrong simulator edition: an XP12-only X-World package may use assets or definitions that X-Plane 11 cannot load. Replace it with a package explicitly intended for XP11.
  • Nested folders: the mistake we see most often is Custom Scenery/package-name/package-name/.... Move the inner scenery folder up one level.
  • Disabled package: open scenery_packs.ini and look for SCENERY_PACK_DISABLED beside the affected layer.
  • Missing resource: inspect Log.txt in the X-Plane 11 root directory after the failed load. A line containing Failed to find resource normally identifies a missing or incorrect library.
  • Incorrect priority: move airports above SimHeaven and orthophoto or replacement mesh below it. Also remove competing regional overlays from the same coverage area.
  • Low object density: a low Number of World Objects setting can make a correctly installed package appear sparse.
  • Wrong test location: confirm that the installed regional package covers the coordinates where the flight begins, especially near regional boundaries.

For persistent problems, work through our X-Plane scenery troubleshooting checklist, which covers folder depth, load order and Log.txt diagnosis in more detail.

Which SimHeaven layers can I disable for better performance?

Disable only layers that the documentation for your exact package identifies as optional; first reduce Number of World Objects by one step and compare the same location.

Dense buildings, forests and road networks can increase CPU load and object count, but deleting an unknown layer may remove exclusions or other supporting data and create duplicates. To test an optional layer safely, change its line to SCENERY_PACK_DISABLED, restart X-Plane and keep the original folder so the change can be reversed.

AI Assistant New

Still stuck? Ask Fly Away

Ask Fly Away is our AI flight-sim assistant. Ask your exact question and get a direct, step-by-step answer in seconds — free to try.

Ask Fly Away Free preview · unlimited for PRO members