Fly Away Simulation

FS2004 AFCAD Files

Page 38

Sort by:

KEYQ

Weiser Air Park, Houston, Texas (TX). Adds a few helipads and redoes the approach and runway lights. By Chase Barnett. You must have AFCAD v2.11 to add this modification. This is for the pilots that love to fly in and out of small airports. Installation: Simply open " My Computer " and go to your FS9 root folder. Default installation is C:Program FilesMicrosoft GamesFlight Simulator 9. Next, go to the Addon Scenery and you should see 2 folders (by default) Labeled...

File size: 2.69 KB | Download hits: 9

AFCAD2 Files For Shannon/Belfast City

Shannon/Belfast City, Ireland. Improves both EINN and EGAC airports. By Rene Bruun. This is the last and final installment for the Shannon / Belfast City Projects. Basically these default AFCAD's have been amended to accommodate more traffic and larger traffic in some cases. More parking has been added to the airports and also runway lengths increased. EINN: Airport resurfaced from Asphalt to Tarmac. Two parallel runways now designated 2L and 2R and 20L and 20R. 2L is for landings...

File size: 10.25 KB | Download hits: 34

KGPT

Gulfport-Biloxi Int'l Airport, Mississippi (MS). If you intend to use the fault finder from AFCAD on these airports you should ignore ISOLATED SEGMENT and NODES POSSIBLY UNCONNECTED errors as these are always intentional and used to enhance the flow of traffic and/or the appearance of the airport. These files are intended to enhance the flow and amount of traffic at airports. The number of parking spots has been increased, taxiways may have been added or removed, runways may have been...

File size: 5.87 KB | Download hits: 26

MHTG

Toncontin Airport, Tegucigalpa, Honduras. By Karl F. Hajek. Many stock airports in FS9/2004 leave rather much to be desired, even international airports of small countries do not even provide space enough to maneuver (taxi) any commercial aircraft properly. Also there are usually too little facilities as to provide space for the real world traffic these airports are supposed to handle (e.g. wide-body jets and realistic AI-traffic. I do not claim 100% accuracy for this airport, but at least...

File size: 4.86 KB | Download hits: 47

TTPP AFCAD2 File

Piarco Int'l Airport, Port of Spain, Trinidad and Tobago. Only for use with Bill Melichar's scenery. By Ray Smith and Stanley Augustus. This file is only for Bill Melichar's beautiful add-on Scenery (this will not work with the default airport) the runway is now the correct length and cargo parking added to the south apron, gates are numbered in the correct order and aircraft allocation as in real life my thanks to Stanley Augustus for supplying the information, Taxiway/Runway...

File size: 6.04 KB | Download hits: 38

EGAC

Belfast City Project, Ireland, v2. Now includes more parking spaces, runway 4/22 is also extended to 8500 feet. Taxiway and apron extended and ground textures changed to tarmac instead of Asphalt. Also adds three helicopter landing zones. Enjoy! ...

File size: 5.13 KB | Download hits: 11

PGUM AFCAD2 File

MS FS2004 default scenery for Guam International Airport (PGUM). Installation: Move AF2_PGUM to Flight Simulator 9Addon SceneryScenery folder and click yes to replace. ...

File size: 15.77 KB | Download hits: 24

MZBZ AFCAD2 File

Belize International airport. For FS2004 only. By K.F. Hajek. Version2 changes: Added tower view. Corrected some gate errors. AI traffic will now use the proper parking positions. Many stock airports in FS9/2004 leave rather much to be desired, even international airports of small countries do not even provide space enough to maneuver (taxi) any commercial aircraft properly. Also there are usually too little facilities as to provide space for the real world traffic these...

File size: 4.1 KB | Download hits: 50

Fairbanks Int'l

Fairbanks International Airport (PAFA), Alaska (AK), v3. This AFCAD2 adds new runway 1R/19L left out of FS2004 by Microsoft. By Steve Lewis. This AFCAD adds new Runway 1R/19L left out of FS9 by Microsoft. Runway 1/19, formerly 1R/19L, is a 3,500' X 75' gravel strip used as a ski strip in the colder months and is still shown off the northern end of 1R/19L. All airline gates are shown as close to their proper locations as the limitations of FS9 allows. Northern Air Cargo parking spots...

File size: 12.59 KB | Download hits: 43

Hong Kong Chek Lap Kok

Hong Kong Chek Lap Kok Int'l Airport (VHHH) scenery by Thomas Kwong. Features with nearly all gates and parking as real. All gates have airlines assignments. By Chan Kwok Ho. Overview of Chek Lap Kok Int'l Airport. My second Afcad for Hong Kong Chek Lap Kok Int Airport(VHHH). Featured with nearly All Gate & Parking as real. All Gate have airlines assignment from my observation in HKIA's "Real time departure". Also some fictional Gate assignment for...

File size: 1014.58 KB | Download hits: 270

HECA

Cairo Int'l Airport, Egypt. ...

File size: 12.45 KB | Download hits: 62

KLBF

North Platte Regional Airport, Nebraska (NE). If you intend to use the fault finder from AFCAD on these airports you should ignore ISOLATED SEGMENT and NODES POSSIBLY UNCONNECTED errors as these are always intentional and used to enhance the flow of traffic and/or the appearance of the airport. These files are intended to enhance the flow and amount of traffic at airports. The number of parking spots has been increased, taxiways may have been added or removed, runways may have been...

File size: 4.58 KB | Download hits: 8

Fort Myers

Fort Myers - Southwest Florida International Airport (KRSW), Florida (FL). By Mike Hopkinson This AFCAD2 file is an update for the FS2004 default Southwest Florida International Airport and Chris Gilbret RSW2002 for FS9. All gates are accurate. Ramp+KRSW by Adam Collins. To Install: Place the AF2_KRSW.bgl file into Flight Simulator 9Addon Sceneryscenery for the default scenery. Place the CGAF2_KRSW.bgl file into Flight Simulator 9Addon Sceneryscenery for Chris Gilbert's...

File size: 12.11 KB | Download hits: 19

KXNA

Northwest Arkansas Regional Airport, AR. If you intend to use the fault finder from AFCAD on these airports you should ignore ISOLATED SEGMENT and NODES POSSIBLY UNCONNECTED errors as these are always intentional and used to enhance the flow of traffic and/or the appearance of the airport. These files are intended to enhance the flow and amount of traffic at airports. The number of parking spots has been increased, taxiways may have been added or removed, runways may have been altered,...

File size: 5.38 KB | Download hits: 13

MSSS

Ilopango/San Salvador, El Salvador. By Karl F. Hajek. Many stock airports in FS9/2004 leave rather much to be desired, even international airports of small countries do not even provide space enough to maneuver (taxi) any commercial aircraft properly. Also there are usually too little facilities as to provide space for the real world traffic these airports are supposed to handle (e.g. wide-body jets and realistic AI-traffic. I do not claim 100% accuracy for this airport, but at least...

File size: 4.87 KB | Download hits: 34

AFCAD2 Files For Czech Airports

Includes LKKV, LKMT, LKPR, LKTB. By Banasiak Artur. ...

File size: 14.62 KB | Download hits: 28

Texture And AFCAD2 For EDDL

Texture and AFCAD2 For EDDL / LTU 2001, Germany. This file is for use with Aerosoft's scenery "LTU 2001" with EDDL Airport. The two texture files change the gate sign numbers into the gate numbers of the real Dusseldorf Airport. With the modified AFCAD2 file all the aircraft will use terminal gates assigned to real airline operations. By Christian Hauke. Original AFCAD-File by Michael Theisen, uploaded/modified with his permission. Original textures by Aerosoft. PLEASE...

File size: 49.86 KB | Download hits: 32

Maldives AFCAD2

This will add more parking areas and gates to these two airports in the Maldives: Gan Island (Gan) Male (Male Intl) This is for use with AFCAD 2.04 or later versions by Lee Swordy and is for FS2004 ONLY, it is intended for use with the default scenery and I can not guarantee that it will work properly with addon scenery. This is not intended to be an accurate representation of the taxiing/parking layout at this airport, however it adds more parking spaces/gates etc. This is useful...

File size: 5.08 KB | Download hits: 43

KTPA AFCAD2 File

Tampa Int'l Airport, Florida (FL) for use with Fly Tampa scenery. By Dave Fisher. This AFCAD2 for Fly Tampa KTPA adds parking codes for use with Flight 1's Ultimate Traffic. Install this file into your Flight Simulator 9Addon SceneryScenery folder. ...

File size: 14.36 KB | Download hits: 24

OLBA2002

OLBA2002 scenery of Beirut Int'l Airport, Lebanon (OLBA). This is the AFCAD file that should let the AI traffic as well as the ATC in FS2004 uses our OLBA2002 layout and Navaids in a correct wayBy Michel Karam. Cover image for OLBA 2002 scenery. First I would like to thank two gentlemen who made this file possible, Mr Ahmad Sadi & Mr Talal Alhaj. Installation: First you must have our scenery OLBA2002 installed in FS9 without having the FS2002 AFD installed. That...

File size: 13.58 KB | Download hits: 64