Skip to content
X-Plane 5 min read

How do I install Honeycomb Bravo profiles in X-Plane 11?

Adam McEnroe
In short

Install Honeycomb Bravo profiles in X-Plane 11, activate Configurator mappings, assign them by aircraft, and fix missing controls or lights.

In X-Plane 11, a Honeycomb Bravo profile may have two separate parts: an X-Plane joystick profile for axes and buttons, and a Honeycomb Configurator profile for LEDs or advanced commands. Install each with its own method, calibrate the Bravo locally, select the aircraft profile, then activate the Configurator profile.

Which type of Honeycomb Bravo profile did I download?

A Bravo download can be an X-Plane joystick profile, a Honeycomb Configurator profile, or a package containing both. They are not interchangeable, and X-Plane cannot import a Configurator file through its Joystick settings.

Profile typeTypical contentsWhat it controls
X-Plane joystick profileUsually .prf files or instructions referring to control profilesAxes, buttons, switches and aircraft associations
Honeycomb Configurator profileAn importable Configurator file, often in JSON formatAnnunciator lights, custom commands, datarefs and more complex switch logic

Many aircraft packages need both parts. This explains the common situation where the throttles and switches work but the annunciator panel remains dark.

How do I install a Bravo profile in X-Plane 11?

Install the joystick and Configurator components separately, following any aircraft-specific instructions included with the download.

  1. Close X-Plane and extract the download. Do not try to use the profile from inside a ZIP archive. Read the included documentation and confirm that the package was made for X-Plane 11 and the exact aircraft you intend to fly.
  2. Back up your preferences. Copy the X-Plane 11/Output/preferences/ folder before replacing or adding profile files. Avoid packages that tell you to overwrite all preferences without explaining why.
  3. Install the X-Plane profile. Files explicitly supplied as X-Plane 11 control profiles normally belong in X-Plane 11/Output/preferences/control profiles/. Preserve their filenames and folder structure. If that folder does not exist, create a named profile in X-Plane first, close the simulator, and use the folder it creates.
  4. Install the Honeycomb integration when required. The Bravo's ordinary axes and buttons work as USB controls, but Configurator functions and annunciator lights require the compatible Honeycomb X-Plane integration. Its bridge plugin is normally installed under X-Plane 11/Resources/plugins/AFC_Bridge/. Use the package intended for your operating system.
  5. Import the Configurator profile. Open Honeycomb Configurator, use its profile import command, select the extracted profile and then activate it. Importing is not enough: activation writes the selected configuration for the bridge plugin to use.
  6. Select and calibrate the joystick profile. Start X-Plane 11, open Settings, then Joystick, and choose the imported profile from the active-profile control. Calibrate every axis on your own unit even if calibration files were included; saved limits and device identifiers are not always portable between computers.
  7. Check every assignment. Move each throttle, propeller and mixture lever separately. Confirm the direction, remove duplicate axes, and test the flap, speedbrake, trim and autopilot controls before starting a flight.

The calibration and assignment principles are also covered in our detailed Bravo axis and aircraft-profile walkthrough. Its control logic applies to X-Plane 11, but use the X-Plane 11 folder paths and integration package described above.

How do I assign a Bravo profile to each aircraft?

X-Plane 11 can associate a joystick profile with one or more aircraft, while a matching Configurator profile may need to be activated separately.

  • Load the aircraft, open the Joystick settings and select the required entry under Active Profile.
  • Use Manage Profiles to associate that profile with the relevant aircraft rather than changing your global assignments every time.
  • Select the matching lever arrangement. A twin-engine airliner, four-engine aircraft and single-engine propeller aircraft should not share the same axis layout unless you have deliberately designed it that way.
  • Activate the corresponding Honeycomb Configurator profile when the aircraft uses custom commands, datarefs or annunciator logic. Matching names do not make the two profile systems switch together automatically.

X-Plane saves joystick changes as you make them. Configurator edits normally require the profile to be activated again before the bridge uses the revised mapping.

Why is the profile missing or behaving incorrectly?

Most failures come from using the wrong profile type, installing it one folder too deep, or binding the same control in both X-Plane and Configurator.

The imported profile does not appear

Confirm that X-Plane .prf files are directly inside Output/preferences/control profiles, not inside an extra folder created when the archive was extracted. A Configurator profile will never appear in X-Plane's Active Profile list; it must be imported through Configurator.

If an older downloaded profile still does not appear, create a fresh X-Plane profile and reproduce its assignments manually. This is often safer than replacing global preference files created by another installation.

The controls work but the annunciator lights do not

This usually means the Bravo is recognised as a controller but AFC_Bridge is absent, duplicated, installed in the wrong X-Plane copy or has no activated configuration. Check X-Plane's plugin list, confirm Configurator targets X-Plane 11, and remove obsolete duplicate bridge installations.

The aircraft must also have electrical power, and profiles using custom datarefs must match the exact aircraft. Our Bravo profile and annunciator-light troubleshooting guide explains the distinction between simulator mappings and Configurator mappings in more detail.

The levers move backwards or switches fire twice

Reverse the affected axis in X-Plane only when its on-screen response is backwards, then recalibrate it. If a switch triggers twice or immediately cancels itself, clear either the X-Plane assignment or the Configurator assignment so only one system sends that command.

The commercial reverse handles and TOGA buttons are button inputs rather than additional throttle axes. They need suitable reverse-thrust or TOGA commands supported by the aircraft; complex add-ons may use their own custom commands.

Should I download a profile or build my own?

Use a downloaded profile when it explicitly supports your X-Plane 11 aircraft and you need custom lights or datarefs; build your own for stock aircraft or a personalised lever layout.

Native X-Plane assignments are usually the simplest choice for axes and ordinary buttons. Reserve Configurator for annunciators, aircraft-specific commands and logic that X-Plane's standard Joystick page cannot express. This reduces duplicate inputs and makes faults much easier to isolate.

AI Assistant New

Still stuck? Ask Fly Away

Ask Fly Away is our AI flight-sim assistant. Ask your exact question and get a direct, step-by-step answer in seconds — free to try.

Ask Fly Away Free preview · unlimited for PRO members