Skip to content
X-Plane 5 min read

How do I install and configure HeadShake in X-Plane 11?

Adam McEnroe
In short

Install SimCoders HeadShake in X-Plane 11, tune its camera effects, avoid nested folders, and fix missing-plugin, jitter and compatibility issues.

To install SimCoders HeadShake in X-Plane 11, extract the actual HeadShake folder into X-Plane 11/Resources/plugins, avoiding an extra nested folder. Restart X-Plane, load an aircraft in the 3-D cockpit, open HeadShake from the Plugins menu, enable it and begin with conservative motion settings.

How do I install HeadShake in X-Plane 11?

HeadShake is a global X-Plane plugin, so it belongs under Resources/plugins, not inside an individual aircraft folder.

  1. Close X-Plane 11. Installing a native plugin while the simulator is open can leave the old plugin state loaded.
  2. Find the active X-Plane directory. If you have several copies or installations, use our guide to identify the X-Plane 11 installation folder actually being launched.
  3. Extract the downloaded archive. Unpack it into a temporary folder rather than copying the compressed file into X-Plane.
  4. Locate the real HeadShake plugin folder. It should contain the plugin's files or platform-specific subfolders. Do not copy a download wrapper containing documentation and another HeadShake folder.
  5. Copy HeadShake into the plugins directory. The resulting path should begin X-Plane 11/Resources/plugins/HeadShake/. Our X-Plane mod folder explanation covers the same global-plugin structure and common folder-nesting mistake.
  6. Start a cockpit flight. Open X-Plane's Plugins menu and look for HeadShake. Use its settings command to enable and configure the effects.
  7. Restart once after configuration. Confirm that the plugin loads and its settings remain in place after a normal simulator restart.

A mistake we see constantly is Resources/plugins/HeadShake/HeadShake/.... If the actual plugin is buried inside that second folder, X-Plane may not discover it.

Which HeadShake settings should I use?

The best HeadShake configuration is restrained enough to convey aircraft motion without making instruments difficult to read. Setting names and available controls can vary between releases, so tune by effect rather than copying unexplained slider values.

EffectWhat to look forPractical starting approach
Ground rollRunway joints, rough surfaces and increasing vibration during the take-off rollRaise it until surface texture is noticeable, then reduce it if taxiing becomes tiring
Engine vibrationMovement associated with engine operation and power changesUse more for light piston aircraft and less for a modern airliner cockpit
G-force and aerodynamic motionHead displacement during acceleration, braking, turns and manoeuvresKeep it moderate so the viewpoint does not obscure instruments or controls
Touchdown or impact motionA short response when the aircraft contacts the runwayAvoid exaggerated values that turn every normal landing into a violent camera movement

Tune HeadShake in the aircraft you fly most, but check another aircraft before settling on the settings. A vibration level that suits a single-engine propeller aircraft can look excessive in a heavy jet.

Use a normal 3-D cockpit view while adjusting it. External views and a stationary aircraft are poor tests; a taxi run, take-off, turn and landing reveal whether each effect is actually working.

Can HeadShake work with X-Camera or head tracking?

HeadShake can be used with camera and head-tracking add-ons, but duplicate motion effects must be avoided. If your camera software offers HeadShake integration, use that supported connection and do not run two separate shake or turbulence systems at full strength.

With TrackIR or another head tracker, begin with low rotational effects because tracked head rotation can amplify the apparent movement. If the view is stable without tracking but jitters, snaps or drifts when tracking is enabled, HeadShake is installed correctly and the problem is camera ownership or duplicated effects.

Why does HeadShake not appear or work?

HeadShake usually fails because X-Plane is loading the wrong installation, the folder is nested incorrectly or the plugin binary is incompatible with the operating system or simulator version.

  • No HeadShake entry in the Plugins menu: Recheck the installation path and remove any extra wrapper folder. Open Log.txt in the X-Plane 11 root directory and search for HeadShake or plugin-loading errors.
  • The plugin is listed but nothing moves: Confirm that it is enabled, its effect controls are above zero, the simulator is not paused and you are testing from the 3-D cockpit while the aircraft is moving.
  • The view shakes twice or jitters: Disable overlapping camera, turbulence or vibration effects in HeadShake, X-Camera, the aircraft or another plugin until only one system produces each type of motion.
  • X-Plane disables the plugin at startup: Use a HeadShake package explicitly compatible with X-Plane 11 and your operating system. Remove duplicate or obsolete copies before testing again.
  • Settings do not persist: Check that the X-Plane directory is writable and that security software or synchronisation software is not preventing the plugin from saving its configuration.

For deeper diagnosis, follow our steps for checking Plugin Admin, folder nesting and X-Plane's Log.txt. Although that page names X-Plane 12, those core plugin checks also apply to X-Plane 11.

Can I use the X-Plane 12 HeadShake package in X-Plane 11?

Do not assume an X-Plane 12-only HeadShake build will work in X-Plane 11 merely because both simulators use Resources/plugins. Choose a package whose compatibility information explicitly includes X-Plane 11; if you are installing into the newer simulator, use our separate HeadShake installation instructions for X-Plane 12.

AI Assistant New

Still stuck? Ask Fly Away

Ask Fly Away is our AI flight-sim assistant. Ask your exact question and get a direct, step-by-step answer in seconds — free to try.

Ask Fly Away Free preview · unlimited for PRO members