Skip to content

How do I install and fly the Horizon 787-9 in MSFS 2020?

Adam McEnroe
  • 6 min read

In short

Install the Horizon Boeing 787-9 in MSFS 2020, meet its 787-10 dependency, fix missing aircraft, and complete a basic flight.

In this answer
  1. What do you need before installing the Horizon 787-9?
  2. How do I install the Horizon 787-9 in MSFS 2020?
  3. How do I fly the Horizon 787-9?
  4. Why does the Horizon 787-9 not appear or load correctly?
  5. Why will LNAV or VNAV not follow the route?
  6. Can I install it on Xbox or use the MSFS 2024 package?

To install the Horizon Boeing 787-9 in MSFS 2020, use the MSFS 2020 release, place its package in the active Community folder, and ensure the Premium Deluxe Boeing 787-10 is installed. Then program the 787's FMC, complete take-off performance, and fly it with LNAV and VNAV like the default 787.

What do you need before installing the Horizon 787-9?

You need the PC version of Microsoft Flight Simulator 2020 and access to the Premium Deluxe Boeing 787-10. The Horizon 787-9 uses content supplied with that aircraft, so the Standard edition or base Game Pass installation alone is not sufficient.

  • Update MSFS 2020 and install the Boeing 787-10 through Content Manager.
  • Load the default 787-10 once to confirm that it works before adding Horizon.
  • Obtain the Horizon package intended specifically for MSFS 2020, not the MSFS 2024 build.
  • Use the Modern flight model unless the documentation supplied with the package says otherwise.
  • Remove obsolete 787 system overrides that are not listed as dependencies for your exact Horizon release.

Do not install the old Heavy Division B78XH modification merely because an older tutorial mentions it. Horizon dependency requirements have changed between releases, and an unlisted 787 override can produce blank displays, broken controls or loading failures.

How do I install the Horizon 787-9 in MSFS 2020?

Install one clean copy through the authorised package manager or extract the manual package into the active MSFS 2020 Community folder.

  1. Close MSFS 2020. Changing an aircraft package while the simulator is running can leave files locked or prevent the new version from being detected.
  2. Delete the previous Horizon 787-9 package. Do not merge a new release over an older folder, as obsolete files can remain active.
  3. Install the MSFS 2020 build. If the release is supplied through the Headwind Installer, verify that it targets your MSFS 2020 Community folder. If it is supplied as an archive, extract it first rather than placing the ZIP file in Community.
  4. Check the package structure. The aircraft's package root should contain files such as manifest.json and layout.json. If those files sit inside two identically named folders, move the inner package to Community.
  5. Keep it out of the Official folder. Manually installed freeware belongs in Community; modifying official simulator packages can damage the base 787 installation.
  6. Start MSFS normally. Search the aircraft selector for the Boeing 787-9 and test the supplied default livery before adding third-party liveries.

The active Community location can differ when MSFS was installed on another drive or a custom packages path was selected. Our Community-folder and aircraft package guide explains how to identify the correct folder and recognise a nested installation.

How do I fly the Horizon 787-9?

A reliable first flight starts with a complete FMC route, valid performance data and the correct modes selected on the mode control panel.

  1. Start at a gate. Set fuel and payload through the supported aircraft interface or the simulator's weight-and-balance controls. Avoid loading excessive fuel for a short test flight.
  2. Power the aircraft. Switch on the battery and use external power or start the APU. Complete inertial alignment if your installed version simulates it, and wait for the displays and position data to become valid.
  3. Build the route. Enter the origin, destination, runway, departure, route, arrival and approach in the FMC. Review the LEGS pages, resolve unintended discontinuities and press EXEC when changes are ready. Do not remove a deliberate vector leg unless you have a replacement clearance or intercept plan.
  4. Complete performance setup. Enter the cruise altitude, cost index, reserves and required weight data on the performance pages. Select the intended take-off flap setting, calculate or confirm the V-speeds, and set the displayed stabiliser trim.
  5. Start and configure. Use the aircraft checklist for APU, beacon, fuel and engine-start actions. Set the calculated flaps, arm autothrottle, switch on both flight directors and set the cleared altitude on the mode control panel.
  6. Take off and climb. Rotate at VR, establish a positive climb and retract the gear. Follow the flight director, clean up on schedule and engage the autopilot only after the aircraft is stable. Arm LNAV and VNAV when the programmed route and clearance permit them.
  7. Prepare the arrival early. Select and verify the arrival and approach before the top of descent. Check every altitude constraint and lower the selected altitude when cleared so VNAV can descend.
  8. Configure for landing. Set VREF, verify the landing runway and navigation data, then extend flaps and gear on schedule. For an ILS, verify the tuned frequency and identifier before arming APP on a suitable intercept.

For the complete cockpit sequence, including FMC pages, climb, descent and landing technique, use our detailed MSFS 2020 Boeing 787 flying walkthrough. The Horizon aircraft follows the same basic systems logic, although tablet features and minor controls can vary by release.

Why does the Horizon 787-9 not appear or load correctly?

A missing or broken Horizon 787-9 is usually caused by the wrong Community folder, absent Premium Deluxe content, a nested package or a conflicting 787 modification.

SymptomLikely causeFix
Aircraft is absent from the selectorWrong Community folder, ZIP not extracted, nested package or MSFS Safe ModeConfirm the active packages path, extract the archive and start MSFS without Safe Mode.
Black displays or missing cockpit parts787-10 content is missing, outdated or being overriddenInstall and test the Premium Deluxe 787-10, then remove unlisted 787 system mods.
Loading returns to the menuDuplicate, incomplete or merged Horizon packagesDelete every old copy and perform a clean installation of one release.
Pink or missing texturesIncomplete download or incompatible liveryReinstall the aircraft and test its default livery before restoring other liveries.

The mistake we see most often is troubleshooting several add-ons at once. Temporarily move other Community packages out, leave only Horizon and its documented requirements, then restore the remaining add-ons in small groups.

Why will LNAV or VNAV not follow the route?

LNAV and VNAV need an executed route, a valid active leg, complete performance data and compatible selected altitudes.

  • If LNAV will not engage, check for an unexecuted route or route discontinuity. When the aircraft is too far from the active leg, use heading select or an appropriate direct-to instruction to establish an intercept.
  • If VNAV will not climb, confirm the cruise altitude and make sure the selected altitude is above the aircraft.
  • If VNAV will not descend, set a lower cleared altitude and verify that the arrival constraints are sensible.
  • If the aircraft turns unexpectedly, inspect the active leg rather than repeatedly disconnecting the autopilot. A stale departure runway or duplicated waypoint is often responsible.

Can I install it on Xbox or use the MSFS 2024 package?

The manually installed Horizon 787-9 described here is for PC because Xbox does not expose a Community folder. Xbox aircraft must be delivered through the simulator's Marketplace rather than installed from a PC archive.

Do not assume the MSFS 2020 and MSFS 2024 packages are interchangeable. For the newer simulator, follow the separate MSFS 2024 Horizon 787-9 installation procedure and use the build specified for that platform.

AI Assistant New

Still stuck? Ask Fly Away

Ask Fly Away is our AI flight-sim assistant. Ask your exact question and get a direct, step-by-step answer in seconds — free to try.

Ask Fly Away Free preview · unlimited for PRO members