Install SimBrief Downloader for X-Plane 12, set the correct FMS plans path, load .fms routes, and fix missing or rejected flight plans.
Install SimBrief Downloader as a desktop application, not an X-Plane 12 plugin. Connect it to your SimBrief account, enable the X-Plane .fms export, and point that export to X-Plane 12/Output/FMS plans. Generate a new operational flight plan, then load the saved route through the aircraft's GPS or FMS.
Install SimBrief Downloader for X-Plane 12
The application can be installed anywhere suitable on your computer; only its export destination belongs inside X-Plane 12.
- Obtain the desktop installer. Use the installer supplied through the product's official download area and select the version offered for your operating system.
- Install it as a normal application. Do not place SimBrief Downloader in
Resources/plugins. It runs separately from X-Plane and must remain open, or running in the background, when it checks for new plans. - Connect the correct SimBrief account. Sign in or enter the requested username or Pilot ID, depending on the Downloader release. Use the same account that generates your flight plans, not an airline callsign or aircraft registration.
- Locate the active simulator folder. X-Plane can be installed almost anywhere, so confirm that you are configuring the copy you actually launch. Our guide to finding the active X-Plane 12 installation folder covers the common locations.
- Enable the X-Plane export. Select the X-Plane 12 or standard X-Plane
.fmsformat. If the list only labels it as X-Plane 11, that.fmsformat is also the normal choice for X-Plane 12. - Set the destination folder. Point the export to
X-Plane 12/Output/FMS plans. Do not select the X-Plane root folder,Custom Scenery, orResources/plugins. Preserve the folder's capitalisation on operating systems with case-sensitive paths. - Generate a new OFP. Enable automatic downloading, leave the utility running, and generate the operational flight plan. If the planning side is unfamiliar, follow our explanation of building and generating an export-ready SimBrief plan.
- Check the result. A file ending in
.fmsshould appear inOutput/FMS plans. If you configured Downloader after generating the plan, regenerate the OFP because an existing plan may not be exported retrospectively.
Which SimBrief export format works with X-Plane 12?
For most X-Plane 12 aircraft, use the standard X-Plane .fms export unless the aircraft's documentation requires its own company-route format.
| Export option | Choose it when | Destination |
|---|---|---|
X-Plane .fms | The stock avionics or add-on can read standard X-Plane flight plans | Output/FMS plans |
| Aircraft-specific company route | The add-on's manual names a particular format and folder | The aircraft's documented route folder |
| OFP or PDF | You want a document for briefing or manual data entry | A normal documents folder; it cannot be loaded as an X-Plane route |
A common mistake is exporting several formats into Output/FMS plans. That folder should contain files the X-Plane avionics can recognise, principally .fms plans.
How do I load the SimBrief flight plan in X-Plane 12?
Load the generated .fms file through the aircraft's flight-plan or route-loading control, then inspect and activate the route before using GPS, NAV, or LNAV guidance.
- Power and initialise the avionics. Complete any position or navigation-system setup required by the aircraft.
- Open the route loader. In a GPS-equipped aircraft this is part of the flight-plan interface; a CDU-equipped aircraft normally provides a company-route or stored-route function.
- Select the downloaded plan. Choose the filename found in
Output/FMS plans. If it is absent, check whether that aircraft uses a private route folder or direct SimBrief import instead. - Review every leg. Resolve discontinuities and verify the runway, SID, STAR, approach and destination. A saved route is not a clearance, and procedure availability can differ when the simulator and SimBrief use different navigation-data cycles.
- Activate or execute the route. Set the appropriate GPS or FMS navigation source and arm the aircraft's lateral mode only after confirming the active leg. Our guide to loading, checking and activating routes in the X-Plane FMS explains the cockpit side in more detail.
Why is SimBrief Downloader not saving the flight plan?
Most failed exports are caused by the wrong account, an inactive export option, or a destination pointing at another X-Plane installation.
- No file is downloaded: keep Downloader running, confirm internet access and account details, enable automatic export, and generate a new OFP. Merely editing or saving a draft may not trigger a download.
- The file goes to the wrong copy of X-Plane: check the full destination path. This is common when a demo, backup or older installation remains on the same computer.
- The application cannot write the file: grant the application permission to access the X-Plane folder. Protected system folders and operating-system privacy controls can block exports.
- The file exists but the avionics cannot see it: confirm that it ends in
.fms, refresh the flight-plan list, or reload the aircraft. Some custom aircraft scan only their own route folder or read plans during initialisation. - The route reports missing or invalid waypoints: compare the navigation-data cycle used to create the plan with the data installed in X-Plane and the aircraft. Align the cycles where possible, or repair the affected legs manually.
Should I use SimBrief Downloader or SimBrief Hub?
Use Downloader when an aircraft expects a local .fms or company-route file; use SimBrief Hub or an aircraft's built-in import when that workflow is explicitly supported.
You normally do not need both tools exporting the same route. If the aircraft instructions refer to Hub rather than local files, use our separate SimBrief Hub setup for X-Plane 12 instead.
Does Downloader import fuel, payload and performance data?
A standard .fms export should be treated as a route file, not a complete aircraft setup. It does not reliably configure fuel, payload, take-off performance, weather, autopilot modes or the X-Plane ATC flight plan. Enter those from the OFP unless the aircraft provides a documented SimBrief integration for them.