Set up SimBrief for the Airbus A350 in X-Plane 12, choose the right profile, import the route, and fix navdata, fuel or payload mismatches.
To set up SimBrief for an Airbus A350 in X-Plane 12, create an A350 airframe matching the exact variant, generate the operational flight plan, then import it with the add-on's SimBrief Pilot ID feature or its supported route format. Verify navdata, fuel, payload and the departure runway before flight.
Which A350 profile should I use in SimBrief?
Choose A359 for the Airbus A350-900 and A35K for the A350-1000. For a FlightFactor installation modelling the A350-900, use A359; a different livery does not change the aircraft variant.
The SimBrief airframe must match the aircraft package, engine option and units used in X-Plane 12. Our guide to the available X-Plane 12 A350 packages can help identify which model you have installed. Avoid changing maximum weights or fuel capacity unless the add-on documentation supplies different figures.
How do I connect the X-Plane 12 A350 to SimBrief?
- Create the airframe. Select the correct A350 variant, choose kilograms or pounds, and save the profile. Our SimBrief airframe and OFP walkthrough covers route, payload and dispatch settings in more detail.
- Build and generate the flight. Enter the airports, aircraft, payload and planned departure time, then generate the OFP. Saving edits is not enough: aircraft integrations retrieve the latest generated OFP.
- Select the import method. Use direct Pilot ID retrieval if the A350 provides it. Otherwise export the dedicated format named for your A350 package. Use a generic X-Plane
.fmsfile only when the aircraft documentation says it is supported. - Load the route. Enter the numeric SimBrief Pilot ID in the add-on's EFB or avionics settings, then use its flight-plan request or import command. An A350 may present this through a cockpit display rather than the conventional MCDU found in older Airbus types.
- Complete the flight plan. Check the origin, destination, route discontinuities, cruise level, cost index, runway, SID, STAR and approach. Importing a route does not make it ready for departure.
| Import method | Use it when | Main trap |
|---|---|---|
| SimBrief Pilot ID | The A350 EFB or avionics has a built-in SimBrief request | Entering a username, callsign or email instead of the numeric Pilot ID |
| Add-on-specific export | The package supplies its own company-route format or exporter target | Choosing a similarly named format intended for another Airbus add-on |
X-Plane .fms | The aircraft uses the default X-Plane FMS or explicitly accepts this format | Assuming a custom A350 flight-management system can read generic files |
For aircraft that accept standard X-Plane plans, export the file to X-Plane 12/Output/FMS plans. Follow our X-Plane 12 route-loading instructions for the remaining FMS steps. If direct retrieval is available, the SimBrief-to-FMC import process explains how Pilot IDs and generated plans work.
Why does the A350 reject my SimBrief route?
An A350 usually rejects a SimBrief route because the wrong export format was used or the simulator and dispatch planner have different navigation-data cycles.
- Unknown waypoint or airway: compare the navdata cycle shown on the OFP with the cycle reported by the aircraft. Rebuild the route with fixes recognised by both databases, or update them to matching cycles.
- No flight plan found: generate the OFP again, confirm the Pilot ID, and make sure the file went to the folder used by that exact A350 package.
- An older flight appears: regenerate after every route change. Direct integrations normally request the most recently generated plan, not a saved draft.
- Only the en-route section loads: select or confirm the runway, SID, STAR and approach inside the aircraft. Procedure imports may be omitted deliberately or rejected when the databases differ.
- The route list remains empty: verify the file extension and exporter target. Reload the aircraft if its company-route list is only scanned during initialisation.
Does SimBrief load A350 fuel and payload automatically?
Route import does not necessarily load fuel or passengers into the X-Plane 12 aircraft. Some A350 add-ons provide a separate EFB command for loading the SimBrief figures; others require manual entry through their weight-and-balance page.
Match the OFP's zero-fuel weight, block fuel and reserves rather than copying one number into every field. Zero-fuel weight is the operating aircraft plus payload, not the payload alone. Also check the units: treating pounds as kilograms produces an aircraft that is drastically overweight.
What should I verify before departure?
Before starting the take-off calculation, compare the aircraft with the generated OFP.
- Aircraft variant and engine option
- Origin, destination and alternate
- Runway, SID, route, STAR and approach
- Cruise altitude and cost index
- Zero-fuel weight, block fuel and reserve fuel
- Navigation-data cycle and any route discontinuities
SimBrief provides dispatch planning; it does not align the IRS, configure the A350 systems or calculate every take-off field automatically. Complete those aircraft-specific tasks in the add-on after the route and loading figures agree.