Learn how to use the X-Plane 11 flight planner: load routes, activate GPS or FMS guidance, file with ATC and fix autopilot issues.
X-Plane 11 does not have one central flight planner like FSX. Build or load the route in the aircraft's Garmin GPS or FMS, activate it, select the correct navigation source, then use NAV or LNAV mode to follow it. File the route separately with built-in ATC if you want clearances.
Does X-Plane 11 have a built-in flight planner?
X-Plane 11 provides flight-planning functions through each aircraft's cockpit equipment rather than a universal planning screen. The Flight Configuration and map screens choose your starting position and display navigation information, but they do not build and activate a complete route for every aircraft.
| Cockpit equipment | How to create the route | How it is followed |
|---|---|---|
| Garmin GNS 430 or 530 | Enter waypoints through the FPL page and add procedures through PROC | Select GPS guidance and engage NAV |
| Airliner FMS or CDU | Enter the origin, destination, route and procedures, or load a compatible route file | Activate and execute the route, then use LNAV |
| Radio-navigation aircraft | Plan headings and VOR or NDB legs manually | Use heading mode or track the tuned navigation source |
How do I create and follow a flight plan?
- Choose the appropriate cockpit system. Use the Garmin unit in most general-aviation aircraft or the FMS/CDU in an airliner. Procedures and button labels vary between default and add-on aircraft.
- Enter the endpoints. Add the departure and destination airport identifiers, followed by any intermediate fixes required by the route. For a simple VFR flight, a direct route may be enough.
- Add the departure and arrival procedures. Select the runway, SID, STAR, approach and transition only when they apply. Check every inserted waypoint because changing a runway can replace part of the route.
- Activate the route. Confirm that the intended first leg is active and remove any route discontinuities. Merely entering or loading a plan does not make it active.
- Select the navigation source. A Garmin-equipped aircraft normally needs GPS rather than VLOC selected. An airliner must have its route activated and executed before LNAV can use it.
- Intercept and engage guidance. Use heading mode to approach the active course if necessary, then engage NAV or LNAV. The aircraft may not capture a route when it is too far from the leg or flying away from it.
For the detailed knob and page sequence, our guide to building and activating routes in the X-Plane GNS 430 and 530 covers both units. Remember that a lateral route alone does not configure an airliner's VNAV: performance data, weights, cruise altitude and any altitude restrictions still need attention.
Where do X-Plane 11 flight plan files go?
Compatible .fms files normally belong in X-Plane 11/Output/FMS plans/. Load the file through the route catalogue or loading function provided by the aircraft's GPS or FMS; copying it into the folder does not activate it automatically.
Some third-party aircraft use their own formats, folders or navigation systems, so a plan accepted by the default FMS may not appear in an add-on aircraft. For a practical airliner example, see our instructions for loading an external flight plan into the X-Plane 11 Boeing 737 FMC.
If a file does not appear, check that it has not acquired a hidden .txt extension, that it is in the simulator installation you actually launched, and that the aircraft supports that format. A different navigation-data cycle can also produce missing-waypoint or invalid-procedure messages.
Why will the autopilot not follow my flight plan?
The usual cause is an inactive route, the wrong navigation source or no valid leg for the autopilot to capture. Work through these checks in order:
- Confirm that the route is activated rather than merely displayed.
- Check for a discontinuity, duplicate waypoint or incorrect active leg.
- Select GPS instead of VLOC in a Garmin aircraft; switch to VLOC when capturing an ILS where required.
- Use heading mode to intercept the magenta course at a sensible angle before selecting NAV.
- In an airliner, execute route changes and use LNAV rather than a general NAV mode.
- Confirm that the autopilot and flight director are engaged as required by that aircraft.
If the route is visible on the GNS 530 but the aircraft ignores it, follow our G530 autopilot-coupling checks for X-Plane 11.
Does filing with X-Plane 11 ATC load the GPS route?
Filing an IFR plan with X-Plane 11 ATC does not replace entering or loading the route in the aircraft's GPS or FMS. The cockpit system controls lateral navigation, while the ATC flight plan supplies the route and requested altitude used for clearances.
Enter consistent route and altitude information in both places to avoid instructions that conflict with the active cockpit route. Our explanation of filing and flying with X-Plane 11's built-in ATC covers that separate process.