FSX AFCAD Files

Page 25

Sort

Reset

Reno/Tahoe International

KRNO, a Nevada airport, gains a single .bgl file that adds all gates at the facility, with gate assignments derived from aerial photos and a 2003 Reno site image, by K. Troutman. The file uses a .bgl format.

: United States of America
: 11.43 KB
: 152

Norfolk International Airport X2 V

Two BGL configurations exist for the KORF layout, standard KORF_ADE_RS.BGL and crosswind KORF_ADE_CW_RS.BGL, with the latter enabling parallel and crosswind runways for departures and arrivals. Ray Smith crafts the refined layout near the Chesapeake Bay, credits Jim Vile for the crosswind technique, and notes expanded parking, reworked ground paths, and rooftop control tower viewpoint.

: United States of America
: 36.46 KB
: 150

EKSN

Jonathan K. Hougaard delivers a Sindal Airfield (EKSN) adjustment that realigns aprons, taxiways, and runways using high-resolution imagery and official Danish references for accurate ground layout. The Sindal_EKSN.bgl file enables precise apron configurations and taxi routes, though AFIS displays 122.900 instead of 118.750.

: Denmark
: 21.2 KB
: 148
: 1

Ngoma Airstrip

Located in Kafue National Park in Zambia, Ngoma Airstrip carries the identifier FLNA and is credited to Bashir Ismail. Two BGL files exist for the airstrip, located in the southern half of Kafue National Park region, FLNA.bgl and FLNA_cvx.BGL.

: Zambia
: 1.4 MB
: 147
: 2

O'Hare International Airport Update

The BR2_KORD file revises runway 27L-9R to 28-10 and reworks Terminal 2 at KORD, aligning concourse assignments after a United Express flight highlighted a misplacement. A subsequent check confirms other terminal pairings look correct, ensuring consistent operations across the field.

: United States of America
: 38.36 KB
: 144

AFCAD For EHSB

Joost de Wit creates two .bgl files for Soesterberg Airbase (EHSB) in the Netherlands, using Airport Design Editor to mirror the real-world closures of runways, taxiways, and radio frequencies. The project notes the last helicopter departure on 21 November 2008.

: Netherlands
: 78.19 KB
: 143
: 1

AFX File For KRME

An AI parking enhancement for KRME adds parking positions and static aircraft and vehicles, reflecting the 2006 relocation of Oneida County Airport to Griffiss Air Park in Rome, NY. The update comprises KRME_JC.bgl and AFX_KRME_JC.bgl, developed with an AFX program and attributed to Jim Cook.

: United States of America
: 10.56 KB
: 142

AFX For VIDP

Indira Gandhi International Airport (VIDP) in India hosts a layout by Himanshu Singh that reflects limited runway usage, with only runway 10-28 active in low visibility and winter scenarios may place landings on runway 09. When that occurs, the prior layout file serves as an alternative.

: India
: 22.53 KB
: 140

KSAC

Clear Sky Simulations offers a free add-on that refines ground markings, parking designations, and airfield elements at KSAC, Sacramento Executive Airport, south of downtown Sacramento, with two BGL files named KSAC_CSS.BGL and KSAC_CSS_CVX.BGL accompanying the offering to deliver more accurate taxiway placements and approach alignments for local general aviation.

: United States of America
: 16.65 KB
: 139

AFCAD For EHMZ

This refinement for Midden-Zeeland Airfield (EHMZ) in the Netherlands refines airfield data and adds parking positions and runway alignments for general aviation, designed by Joost de Wit and built with Airport Design Editor using default building models. Two .bgl files exist, and a Tower frequency is enabled to provide acknowledgments for takeoff and landing.

: Netherlands
: 56.12 KB
: 139
: 1

Daytona Beach Int'l Airport

An enhancement for Daytona Beach area airport introduces two variants, KDAB_ADE_RS.BGL for standard layout and KDAB_ADE_CW_RS.BGL that enables crosswind operations. It tightens taxiway alignment by adjusting W5, N8, N9, P8, and T, corrects ground signage, adds a helipad, and augments ground services with fuel trucks and reworked perimeter roads.

: United States of America
: 43.03 KB
: 139

TBPB New Taxiway Designators

Grantley Adams International Airport gains adjusted taxiway designations that align with real-world identifiers. TBPB-FSXV100.ZIP by Max Kraus anchors the work, with Rico Simpson credited, and a wind sock is added east of taxiway H while the wind sock by Rwy 2 is adjusted.

: Barbados
: 14.84 KB
: 138

EKVD

Jonathan K. Hougaard crafts a geometry-focused revision of EKVD using COWI A/S imagery and Danish Aeronautical Information Publication materials, with Vamdrup_EKVD.bgl providing redesigned taxiways, aprons, and runway segments for Kolding/Vamdrup in southern Denmark. The AFIS frequency in the sim is set to 122.900, reflecting practical considerations.

: Denmark
: 22.3 KB
: 135
: 1

AFX File For KROC

Jim Cook delivers an AFX-based enhancement for Greater Rochester International (KROC), adding airline-specific gate placements, animated jetways where applicable, and dedicated cargo spots. The AFX_KROC_JC.bgl file is included and compatible with add-on environments, integrating with AI traffic flows to reflect real-world operations.

: United States of America
: 15.04 KB
: 135

TJPS

Diego Soler presents a fictional fix for TJPS in Ponce, Puerto Rico, noting the layout is not accurate or in the exact location. A screenshot shows a plane approaching the airfield, illustrating the intent behind this modification for the airport setup.

: Puerto Rico
: 100.65 KB
: 134
: 1

Demo Juancho Yrausquin Airport

Described as an ADE file, v1.0 by Roland Flommer, it uses SABA_ADE.bgl to add parking positions and taxiways and to support AI traffic at the SABA airport, designed for the demo edition and released as freeware.

: Bonaire, Sint Eustatius and Saba
: 2.86 KB
: 133

AFCAD Old Takamatsu Airport Japan

Ver.1 variant of the old Takamatsu airfield recreates a former site in Kagawa Prefecture, assigning the ICAO code RJTM to differentiate it from the current facility. It depicts a Fokker Friendship and a YS-11-type machine, while noting that buildings and radios remain unrepresented apart from a lone control tower.

: Japan
: 386.47 KB
: 131
: 5

EIME

Casement Aerodrome in Baldonnel, Ireland is authored by Matthew Cummins and provided as freeware, reflecting explicit author attribution and licensing for the work. The acknowledgments name Microsoft Corporation and Airport Design Editor by Scruffyduck, acknowledging both the corporate support and the tooling used.

: Ireland
: 9.24 KB
: 129

KBUF

Buffalo Niagara International Airport in New York carries the KBUF designation and employs Airport Design Editor v1.32 to generate a corresponding .bgl file. The .bgl format reflects data crafted with that editor for this airport.

: United States of America
: 8.69 KB
: 126
: 4/5

ADE File For EGLC

At EGLC in the UK, taxiways and the terminal receive updates, while ground imagery drawn from Google Earth is applied to the field. Kai P. Kamjunke credits the work, noting several airport objects are placed and a new landclass surrounds the facility.

: United Kingdom
: 7.38 KB
: 126