United States of America

Page 6

Sort

Reset

KSC Launch Complex 39

NASA’s Kennedy Space Center Launch Complex 39 for FSX positions the VAB correctly, restores pad 39A–39B with three accurate Mobile Launch Platforms, adds Orbiter Processing Facilities, photoreal ground imagery and a wharf helipad, all using default Microsoft Flight Simulator X assets for balanced frame-rate performance over Florida’s Cape Canaveral coastline.

: 282.41 KB
: 800
: 1/5
: 1

San Antonio International Airport

FSX-only KSAT package applies ADE v1.47 to activate cross-wind patterns, rebuilds Terminal A with 16 gates, adds eight-gate Terminal B and a provisional Terminal C, refines taxiway layout, signage and ground-vehicle roads, supplies extra ramp parking and a control-tower camera view, matching the default Microsoft Flight Simulator X scenery library.

: 50.31 KB
: 791

Pensacola Regional Airport

KPNS Pensacola Regional for FSX refines the Florida Gulf Coast hub with runway extensions, revised taxiway geometry, added LOC for 26, updated landclass, custom FBO and hangar models, and optional apron lighting; compiled for Ultimate Terrain X-USA alignment and fully editable in Airport Design Editor, supplying its own building library.

: 1.08 MB
: 767
: 54

NAS North Island

Covering NAS North Island (KNZY) on Coronado, this FSX-only enhancement reworks aprons, taxi paths, and parking charts, adds a fire station with crash tenders, re-sited ATC tower, static Seahawks plus fuel trucks, and uses stock asset libraries—an unobtrusive way to mirror day-to-day U.S. Navy flight line activity near San Diego.

: 19.05 KB
: 705

Oceana Miramar Carrier

Naval flyers seeking dependable multiplayer carrier operations off Florida’s Gulf Coast will note this FSX Oceana-Miramar scenery: twin static flattops at KNPC, 60 NM southeast of NAS Pensacola, featuring arrestor cables, LOC/DME 108.15 MHz, VOR 110.20 MHz, shared deck-mounted NDBs and intelligently spaced escorts to sustain frame rates during circuit practice.

: 1.81 MB
: 678
: 1

KORD 2010

FSX KORD 2010 refines Chicago O’Hare International for Microsoft Flight Simulator X with the contemporary 9L/27R, full 7 500-ft dimensions, corrected taxiway naming, airline-specific gates across Terminals 1-5 and Cargo City, an AFCAD replacement with dedicated ground-service vehicle paths, giving AI traffic accurate spacing, ILS alignment and SID/STAR compatibility for complex hub operations.

: 262.05 KB
: 642
: 5/5

Lambert-St. Louis Airport

Ray Smith’s Lambert–St. Louis International Airport scenery for FSX updates the Missouri gateway with runway 11/29, precise taxiway geometry, optional four-way crosswind operations, realistic service-road traffic and gate allocations, offering a reliable U.S. Midwest hub for complex AI schedules and VATSIM or offline flying.

: 70.64 KB
: 636

Hill AFB

For the Utah index, this FSX scenery rebuild of Hill AFB (KHIF) near Ogden replaces default assets with geo-referenced AFCAD data, expanded Military_Cargo and Military_Combat ramps, reshaped aprons, corrected taxiway geometry, authentic static support vehicles, and library-based structures, giving military virtual pilots a grounded rendition of the Wasatch Front air base.

: 19.1 KB
: 636

Wichita Mid-Continent Airport

For FSX pilots charting routes across the United States, this Wichita Mid-Continent Airport (KICT) scenery rebuild introduces an ADE-crafted AFCAD, perimeter fencing, diagram-matched taxiways, accurate gate coding, expanded GA stands, and additional terminal objects based on satellite references, aligning closely with current sectional plates.

: 173.8 KB
: 621
: 2/5
: 2

KPVD

Refining Rhode Island’s KPVD for Microsoft Flight Simulator X, this AFCAD rebuild redraws runway 5/23, extends taxiway M, assigns 20 airline gates plus GA and occasional military stands, embeds a vehicle network, custom landclass, heliport and two separate crosswind-runway configs, giving Providence/Warwick flyers realistic traffic flow, gate codes and updated terminal footprints.

: 186.08 KB
: 594
: 5/5
: 1

KELP

Targeted at Microsoft Flight Simulator X users maintaining a United States scenery library, this AFCAD rebuild for El Paso International Airport (KELP) adjusts the airfield layout via ADE: revised stands, coded gates, precise taxi lines, service-vehicle paths, extra fuel triggers and an optional crosswind-runway BGL, yielding smoother AI sequencing and believable tower-cam alignment.

: 509 KB
: 591
: 3

El Paso International Airport X2 V

Border-city El Paso International (KELP) for FSX receives a refreshed AFCAD, offering separate BGLs for optional crosswind-runway ops, proper gate numbering, expanded parking stands, animated jetways on the east concourse, corrected taxiway geometry and signage, revised hold-shorts, and tower-roof viewpoints compatible with AI packages.

: 49.64 KB
: 585

Dallas/Fort Worth

Dallas/Fort Worth International (KDFW) for Microsoft Flight Simulator X refreshes the AFCAD with 13,401-ft extensions on 18L/36R, 18R/36L, 17C/35C and 17R/35L, adjusted hold-short points, corrected taxiway links and gate mapping for Terminal D, improving AI traffic flow, SID/STAR alignment and realistic long-haul dispatch from this major U.S. hub.

: 250.79 KB
: 579

Little Rock AFB

Little Rock AFB (KLRF) for Microsoft Flight Simulator X refreshes the Jacksonville, Arkansas military hub with redesigned AFCAD, accurate Air Mobility Command ramps, extra Mil_Cargo stands, relocated tower, updated taxiway geometry, stock-model firehouse, static fuel trucks, lit parking lots and other native-library details for smooth AI traffic operations.

: 16.55 KB
: 579

Aspen-Pitkin County Airport

FSX scenery enhancement of Aspen–Pitkin County Airport KASE mirrors the 2011 airfield upgrade, adding a 1,000-foot extension to runway 15/33 so SkyWest, Republic and American Eagle regional jets can depart at full payload, featuring revised thresholds, taxiway geometry and compatible navaids for demanding high-altitude Rocky Mountain approaches.

: 7.92 KB
: 555

Seymour Johnson AFB

Seymour Johnson AFB (KGSB) for FSX reshapes the Goldsboro, NC fighter base with revised geo-referenced runways, military-specific ramps, AI-ready cargo and combat stands, a purpose-built fire station, updated taxiway logic, and stock-object models tuned for Ultimate Terrain and default landclass, built using Flight1 AFX and Instant Scenery.

: 13.21 KB
: 547

Fresno Yosemite Airport

Runway 11L/29R at Fresno Yosemite International (KFAT) gains subtle depth in this Microsoft Flight Simulator X scenery, layering static GA and heavy iron, ground support vehicles, plus a fictional Air National Guard ramp on the southeast apron. Compiled as a single BGL via FSX SDK, the upgrade slots neatly into any West-Coast flying portfolio.

: 147.3 KB
: 544
: 5/5
: 3

AFCAD Enhancement For Default KLAS

Agazi’s AFCAD refresh for McCarran International (KLAS) reshapes the stock FSX Nevada airport: revised taxiway geometry, cargo aprons, D-Gates extension, corrected landclass and runway data, upgraded approach lighting, freshly coded ILS/RNAV/IAP procedures and AI-tuned diamond crossings, matching gate assignments to present airline schedules for steadier ground handling in Las Vegas.

: 1.9 MB
: 510
: 6

Solberg Airport

Solberg Airport (N51) for FSX refreshes this central-New Jersey GA field with the annual balloon festival set-pieces, KB Sims static aircraft, photoreal Round Valley Reservoir, the molecular-shaped Merck & Co. campus, and A.M. Best’s headquarters, all compiled through Airport Design Editor and ModelConverterX to match native Microsoft Flight Simulator X performance.

: 15.73 MB
: 505
: 4

Dallas Love Field (TX)

This FSX airport scenery for Dallas Love Field KDAL refreshes the Microsoft Flight Simulator X default with current charts: crosswind-enabled runway 18/36, overhauled AFCAD taxiway layout, correct signage, airline-specific parking, added GA hardstands, service roads, extra fuel trucks and a tower-roof viewpoint; dual ADE BGL options facilitate either standard or triple-runway operations.

: 50.47 KB
: 496
: 5/5