United States of America

Page 11

Sort

Reset

KFAT

KFAT Fresno Yosemite International AFCAD for Microsoft Flight Simulator X updates the stock airport layout with accurately positioned cargo bays, extra general-aviation tie-downs, defined helicopter pads, and dedicated military stands tuned to MAIW traffic, improving AI pathing and parking logic at this Central California hub.

: 79.5 KB
: 371
: 1

Canyonlands Field/Moab Airport

Canyonlands Field (KCNY) AFCAD for FSX adjusts taxiway geometry, ramp extension, hangar footprint and apron layout to current FAA charts, incorporates Redtail Aviation FBO, helipads, static GA traffic and updated autogen exclusion, giving Utah bush pilots accurate runway markings, fuel truck service and Denver regional carrier gate data.

: 3.04 MB
: 353

Essex County Airport

Serving the busy New York–New Jersey general-aviation corridor, Essex County Airport (KCDW/CDW) scenery for Microsoft Flight Simulator X deploys high-resolution orthoimagery, custom 3-D terminals, updated AFCAD data, dynamic night environment and precise taxiway signage across runways 4/22 and 10/28, blending seamlessly with wider USA northeast terrain for consistent VFR and IFR routing.

: 3.39 MB
: 353
: 5/5
: 3

Greater Kankakee Airport

Covering Illinois’ Greater Kankakee Airport (KIKK / IKK), this FSX add-on refreshes the South Chicago general-aviation field with accurate AFCAD data, photoreal aprons, custom hangars, dynamic lighting, default-friendly AI traffic and corrected navaids, giving instrument practice on runways 4/22 and 16/34 while fitting smoothly into U.S. Midwest VFR scenery.

: 4.09 MB
: 346
: 1/5
: 2

Charlotte International Airport

Charlotte Douglas International Airport (KCLT) scenery for FSX updates runway numbering, realigns taxiway geometry and assigns accurate AI parking codes and airline gates, bringing the busy North Carolina hub in line with current charts; Dusty Bizub’s sixteenth revision enhances ATC sequencing, ramp spacing and jetway reach.

: 22.62 KB
: 339

Scott AFB Airshow

Covering Scott Air Force Base and MidAmerica St. Louis Airport in Illinois, this freeware FSX scenery package injects air-show ambience with static Blue Angels, F-22 Raptor demonstration jet, support vehicles, crowd barriers, updated AFCAD parking, revised taxiways and photoreal ground textures, suiting USAF enthusiasts and virtual airshow pilots while remaining frame-rate friendly.

: 3.54 MB
: 336

NAS Jacksonville

FSX rendition of NAS Jacksonville KNIP refines the default Microsoft Flight Simulator X naval air station with expanded Military_Cargo, Military_Combat and GA parking, corrected aprons, new firehouse, hangars, forklifts, Humvees and night-lit parking lots, delivering a more credible U.S. Navy training hub for AI traffic and online sorties.

: 18.63 KB
: 326

La Guardia Airport

KLGA La Guardia Airport for Microsoft Flight Simulator X overhauls the default New York field via ADE-compiled BGLs, offering a standard build or a crosswind-runway variant, plus animated jetways, expanded gate charts, re-drawn ground-service lanes, extra fuel bowsers and traffic-flow tweaks compatible with Ultimate Traffic, WOAI and stock ATC.

: 34.92 KB
: 325

KLIT

FSX pilots navigating U.S. domestic sectors into Arkansas will find this ADE-engineered AFCAD upgrade for Little Rock National Airport KLIT slots neatly into default scenery; the file activates the crosswind runway for triple-runway operations, re-aligns taxiways and signage to current FAA charts, adds a new tower viewpoint, lighted helipad, extra parking, gate assignments and refined vehicle and fuel routing.

: 77.7 KB
: 317
: 2

Grand Forks Int'l Airport

Covering Grand Forks International Airport KGFK in North Dakota, this FSX scenery update reinstates the new 17R/35L pavement, clarifies taxiway nomenclature, removes duplicate signs, refreshes ILS and RNAV procedures, adds VFR water features, and is compiled via Airport Design Editor for smooth integration with Microsoft Flight Simulator X’s United States terrain layers.

: 344.6 KB
: 313
: 1

CGAS Elizabeth City

CGAS Elizabeth City (KECG) scenery enhancement for Microsoft Flight Simulator X portrays the U.S. Coast Guard air station on North Carolina’s Pasquotank River with revised aprons, realigned taxiways, hand-placed hangars, parking areas, static cutters, seaplane docks, and coastline-matched terrain, tuned for default FSX or Ultimate Terrain users.

: 14.3 KB
: 311
: 3/5

AFX For KJFK

Enhances John F. Kennedy International Airport (KJFK) for FSX by adding accurate lead-in lighting to the Parkway Visual 13L/13R, often called the Canarsie approach, giving flight sim pilots authentic cueing, corrected navigation aids and realistic approach-path geometry; authored with Airport Facilitator X by Hartwig Rohrbeck.

: 58.44 KB
: 307

KBTR Beta

Ported from the FS2004 build, KBTR Beta for Microsoft Flight Simulator X installs Baton Rouge landmarks—State Capitol tower, Cortana Mall, Exxon petro-chemical plant—and animated Mississippi River traffic, supplying VFR reference points and AI shipping along Louisiana’s capital corridor; validated on FSX Deluxe/Acceleration, SP1 systems with unmodified stock airport layout.

: 21.19 MB
: 303
: 2

0S9 Add-On For Orbx

Focused on the United States Pacific Northwest, this scenery enhancement expands Orbx PNW around Jefferson County International (0S9) for Microsoft Flight Simulator X by injecting fresh BGL layers: photoreal downtown Port Townsend, Washington State ferry slips with static vehicles, the paper mill complex, dual marinas, a Coast Guard facility, and an operational Point Wilson Lighthouse beacon.

: 2.7 MB
: 279
: 2/5
: 5

Westover Air Reserve

Covering Westover Air Reserve Base / Metropolitan Airport (KCEF), Springfield–Chicopee, Massachusetts, this freeware Microsoft Flight Simulator X scenery update refines the default United States airbase with revised AFCAD data, dedicated military-cargo and GA stands, a detailed fire station, static fuel trucks and parked aircraft, realigned aprons, enhanced lighting and a relocated tower—all using stock FSX objects.

: 4.73 MB
: 277
: 20

McAllen Miller Int'l Airport

FSX users seeking a South Texas hub will find this ADE-compiled v3.2 upgrade of McAllen Miller International (KMFE) delivers satellite-aligned geometry, corrected taxiway routing, refined ground poly textures, and contextual landmarks such as the McAllen Convention Center, Border Patrol complex, Payne Arena, nearby retail zones, hotels, and golf courses, enriching Rio Grande Valley VFR and IFR operations.

: 7.39 MB
: 274
: 33

West Fork Lodge

West Fork Lodge, a rural GA airstrip in western Montana, supplies Microsoft Flight Simulator X with photo-real terrain, layered ground-poly runway texturing, dynamic seasonal swaps, snow-enabled object conditions and a 3-D lodge model—useful for short-field practice, backcountry navigation and the classic $100-burger hop across USA mountain scenery.

: 76.64 MB
: 269
: 5

Lebanon Municipal Airport

Flight Simulator X pilots updating their U.S. Northeast hangar can slot this Lebanon Municipal Airport (KLEB) AFCAD into New Hampshire’s Upper Connecticut River Valley, adding corrected taxiway geometry, re-sited control tower, GA and Colgan gates, static vehicles, lighted car parks and stock-library buildings aligned to current FAA charts and satellite imagery.

: 9.5 KB
: 263
: 2/5

Craig Municipal Airport

Covering Jacksonville’s Craig Municipal Airport (KCRG), this FSX scenery refines the airfield layout, recreates the Craig Air Center FBO and service apron, aligns runways, taxiways and approach lighting to current FAA charts, and uses an included object library for dense static assets optimised for UTX-USA, Very Dense detail levels and ADE editing.

: 456.32 KB
: 257
: 44

Ocala International

Refines Ocala International / Jim Taylor Field (KOCF) in Florida by enlarging general-aviation parking, realigning AFCAD positions, adding the northern hangar complex, perimeter roads, lighting, static aircraft and vehicle lots; crafted with Flight1 AFX and Instant Scenery using AirNav data, stock FSX libraries and optional Ultimate Terrain or FSGenesis landclass for seamless regional integration.

: 7.96 KB
: 252