United States of America

Page 3

Sort

Reset

Charleston AFB

Updated Charleston Air Force Base / International Airport KCHS for FSX offers a reworked AFCAD layout with true-to-chart taxiway geometry, dedicated C-17 Globemaster III parking, visiting military and cargo bays, coded jetway gates, GA apron spots, LAHSO runway intersections, corrected signage and AI-compatible traffic flow for this South Carolina joint-use field.

: 709.45 KB
: 2K
: 4/5
: 6

Scenery--Shuttle Launch 07

FSX Shuttle Launch 07 supplies an updated Kennedy Space Center scenery add-on for Microsoft Flight Simulator X, integrating a scripted Space Shuttle ascent with timed main-engine ignition, synchronized audio, volumetric smoke columns, ground-blast particle effects, and revised texture work for steady VFR or IFR operations along Florida’s Space Coast.

: 1.36 MB
: 1.9K
: 5/5
: 2

Newark Liberty International

Enhances Newark Liberty International Airport (KEWR) in New Jersey with correct gate numbering, optional cross-wind runway setup, refined taxiway layout, upgraded service roads, expanded parking stands, extra fuel-truck routes and animated jet-bridges; tailored for FSX default scenery and aligned with Ultimate Traffic, WOAI and other AI traffic libraries.

: 47.57 KB
: 1.8K

KTPA

FSX pilots gain a refreshed AFCAD scenery upgrade for KTPA—Tampa International, USA—built in Airport Design Editor; crosswind-active runway 10/28, renumbered 1L/19R and 1R/19L, recalibrated ILS, updated taxiways, signed vehicle roads, coded airline parking, helipad lighting, extra fuel trucks and tower view deliver authentic traffic flow at this busy Gulf Coast gateway.

: 860.24 KB
: 1.7K
: 5/5
: 5

Baltimore International Airport

KBWI scenery upgrade for Microsoft Flight Simulator X aligns Baltimore/Washington International Thurgood Marshall Airport with current charts, adding coded airline gates, animated Ctrl+J jetways, revised cargo aprons, and service vehicles. Built in ADE for exact geometry, the package meshes smoothly with WOAI and other AI traffic schedules.

: 1.27 MB
: 1.6K
: 5/5

AFCAD Washington Dulles International

Updated KIAD v3a AFCAD for Microsoft Flight Simulator X brings Washington Dulles International, Virginia, up to 2010 charts with revised airline gate allocations, rehabilitated 1C/19C taxiway geometry, fresh RNAV approach coding, SID-STAR waypoint refresh, enhanced Route 28 corridor objects and Jim Dhaenens apron light splines, all ADE-built and UTX-USA friendly.

: 428.55 KB
: 1.5K

KIAD

Washington Dulles International Airport (KIAD) gains a refreshed AFCAD for Microsoft Flight Simulator X by Ray Smith, introducing crosswind-enabled runways, re-numbered parking positions with A380-sized gates, CVX terrain corrections, expanded service roads, additional fuel trucks, and a recalibrated tower viewpoint that keeps AI traffic sequencing close to published procedures.

: 747.48 KB
: 1.5K
: 4

PHTO

FSX AFCAD for Hilo International Airport PHTO refines the airport layout, updated scenery objects, re-coded parking stands, helipads and dual runway profiles—including crosswind operations—synchronised with FAA charts; delivers balanced AI flow, realistic ATIS, and cleaner ground service routing for United States island-hopping, GA or regional jet sorties.

: 483.71 KB
: 1.1K
: 3

AFCAD For Honolulu International

Reworked AFCAD for Honolulu International Airport PHNL enhances the stock FSX aerodrome by aligning gates with real-world assignments, inserting missing jetways, broadening cargo and GA aprons, adding Hickam AFB combat and airlift slots, refining ground-service routing, introducing helipads and phantom crosswind strips, and including a light exclusion for seamless MegaScenery Hawaii use, optimised for balanced AI traffic flows.

: 252.98 KB
: 1K

Kelly-Lackland AFB

Pilots crossing the Lone Star State can add Kelly-Lackland AFB (KSKF) to FSX, gaining custom C-5 Galaxy hangars, Wilford Hall, Boeing depot, fuel ramps, coded MAIW parking, animated GSE, refined AFCAD, precise taxiway lighting and photoreal ground textures that anchor San Antonio’s busy military airlift hub.

: 2.16 MB
: 1K

PHKO

FSX pilots navigating Hawaii will find this AFCAD rebuild of Kona International–Keahole Airport (PHKO) delivers revised stand allocation, enlarged GA aprons, corrected taxiway geometry, hold-short signage, new helipads, ground-service roads, fuel-truck circuits and an updated tower camera, all compiled in ADE for smooth AI traffic flow.

: 434.46 KB
: 1K
: 4/5
: 3

KGEG

Revised AFCAD for Spokane International Airport KGEG reshapes the FSX default layout with precise taxiway realignment, updated airline parking codes, expanded GA and cargo aprons, optional cross-wind runway functionality, a lengthened RWY 03 profile, and refined vehicle routings and signage, improving AI traffic flow at eastern Washington’s primary air transport hub.

: 181.11 KB
: 1K
: 4/5
: 1

Norfolk International Airport (KORF)

Norfolk International Airport KORF, serving coastal Virginia, gains a realistic upgrade for Flight Simulator X (SP2/Acceleration) with this AFCAD-based scenery: corrected airline gates, fully animated CTRL-J jetways, revamped general-aviation hangars, detailed cargo ramps, custom terminal models and optimized taxi layouts that mesh smoothly with WoAI and other AI traffic packages.

: 61.55 KB
: 1K

Port Columbus

Port Columbus International Airport KCMH for Microsoft Flight Simulator X SP2 refreshes the Ohio hub with revised AFCAD gate coding, operational CTRL-J jetways, corrected parking coordinates, and supplementary ramp clutter, offering USA-focused virtual pilots a current airport layout compatible with default mesh and AI traffic packages.

: 677.16 KB
: 957

AFCAD Enhancement For Stock KDCA - Second Edition

Second-edition AFCAD rebuild for FSX/P3D Reagan National Airport (KDCA), United States, re-codes runways 1/19 and 15/33 for realistic crosswind operations, limits 14/22 to wind-triggered use, refreshes airline terminal mapping, inserts RNAV(RNP) and LDA-R arrivals, updated blastpads, jetways, GA bays, apron lighting, and AI taxi flows tuned for MyTraffic X.

: 3.27 MB
: 943
: 12

Long Island Mac Arthur Airport

Covering the busy KISP airfield within FSX, this Long Island MacArthur Airport scenery add-on swaps in a custom terminal, jetways, updated AFCAD parking, GA hangars, service vehicles and optional static AI, leveraging RWY12 and EZ-Scenery libraries for detailed objects while keeping frame rates friendly on mid-range rigs.

: 3.93 MB
: 939
: 4

Lihue Airport (PHLI)

Covering the Hawaiian archipelago portion of our library, this freeware FSX package refreshes PHLI / Lihue on Kauai with chart-matched taxiways, revised gate numbering, active crosswind logic, accurate AFCAD parking, and custom OBJ placement so AI traffic, ground handlers and tower perspectives align closely with current real-world airport data.

: 46.24 KB
: 924
: 4/5

Kahului Airport

Detailed Kahului Airport (PHOG) scenery for FSX adjusts Maui’s main gateway with up-to-date taxiway geometry, jetway-equipped concourses A–F, optimized AFCAD for AI schedules, dual-runway crosswind operations, custom landclass, cargo and GA aprons, improved RWY-5 curved ILS path, night lighting and mesh-aligned terrain.

: 1.03 MB
: 912
: 1

Ford Island Navy Base Hawaii

Ford Island Navy Base scenery for Microsoft Flight Simulator X brings the Pearl Harbor landmark on O‘ahu to life with frame-friendly BGL objects, adding combat ramps, static Navy aircraft, moored vessels and a custom ILS for runway 04—an understated yet useful United States naval aviation training backdrop for Hawaii-focused sim flights.

: 401.68 KB
: 864
: 1/5

Cleveland-Hopkins International

Detailed KCLE scenery for FSX refreshes Cleveland–Hopkins with accurate gate numbering across Concourses A-D, optional crosswind 10/28 operations, corrected taxiway geometry, animated jetways, rebuilt vehicle roads, added helipad, dedicated fuel trucks and tower-roof viewpoint, tested with Ultimate Traffic and WOAI for smooth AI flow at this major Ohio hub.

: 62.62 KB
: 836
: 5/5