United States of America

Page 8

Sort
Reset
Preview screenshot

Bangor International Airport

Bangor International Airport KBGR freeware scenery for Microsoft Flight Simulator X refines the Maine hub with expanded gate matrices, fresh general-aviation and cargo stands via a tailored AFCAD, plus stock-library terminals, support vehicles and service roads that slot neatly into the default FSX ecosystem for fluid AI dispatch.

File Size
266.35 KB
Total Downloads
871
Star Rating
5/5
Screenshots
1
Preview screenshot

SP2 Sanford Orlando International Airport

Covering KSFB in Florida, this FSX SP2 scenery update rebuilds Sanford Orlando International with accurate gate coding, extended 09R/27L to 6,000-plus ft plus working ILS, added Delta Connection Flight Academy stands, scrapyard detail, revised taxiway lighting and realistic AFCAD data for GA and charter operations.

File Size
3.08 MB
Total Downloads
870
Preview screenshot

Cleveland-Hopkins International

Detailed KCLE scenery for FSX refreshes Cleveland–Hopkins with accurate gate numbering across Concourses A-D, optional crosswind 10/28 operations, corrected taxiway geometry, animated jetways, rebuilt vehicle roads, added helipad, dedicated fuel trucks and tower-roof viewpoint, tested with Ultimate Traffic and WOAI for smooth AI flow at this major Ohio hub.

File Size
62.62 KB
Total Downloads
829
Star Rating
5/5
Preview screenshot

Land's End Seaplanes

Covering 23 water aerodromes from Key West to Maine, Land’s End Seaplanes for FSX couples custom 3-D docks, AFCAD rewrites, animated traffic and balanced night lighting to give amphibian pilots realistic East Coast hop-and-haul routes, including Chalk’s Key West, Miami Port Rwy 5 and Portland Harbor waterways.

File Size
59.82 MB
Total Downloads
823
Star Rating
5/5
Screenshots
4
Preview screenshot

Sarasota-Bradenton

FSX rendition of Sarasota–Bradenton Intl (KSRQ) refreshes the Florida Gulf Coast hub with current FAA-based aprons, re-drawn taxiways, modern terminal and FBO models, refined landclass, photoreal ground textures and optional night lighting, matching Ultimate Terrain X, WOAI and Acceleration standards—suited to pilots seeking accurate parking codes and AFCAD-level detail.

File Size
1.24 MB
Total Downloads
809
Star Rating
4/5
Screenshots
46
No image available.

USNVT Pack

FSX USNVT Pack layers Naval Air Station Pensacola KNPA, Whiting Field North KNSE and a fixed CVN-69 USS Eisenhower 20 nm off Florida’s Gulf Coast, supplying carrier-grade catapult and arrestor zones, refreshed aprons, taxi routes and nav-aids to support authentic U.S. Navy training flights within Flight Simulator X.

File Size
82.23 MB
Total Downloads
806
Star Rating
5/5
Preview screenshot

Friday Harbor Airport And Lopez Island

Covering Washington State’s San Juan archipelago, this FSX enhancement refreshes KFHR Friday Harbor and S31 Lopez Island with custom ADE layouts, updated taxiway geometry, native-style terminal models, Kenmore Air parking, static GA traffic and ground clutter—an understated yet practical upgrade for VFR pilots navigating Pacific Northwest routes.

File Size
3.77 MB
Total Downloads
797
Star Rating
4/5
Preview screenshot

Chicago Midway International Airport Scenery V2

V2 of KMDW for Microsoft Flight Simulator X revises the default Midway layout with corrected DME readouts, accurately numbered gates, functional Ctrl-J jetways, reworked parking stands for Southwest’s hub operations, and subtle ambient objects that bring the Chicago-Illinois field in line with current charts while keeping performance stable.

File Size
1.88 MB
Total Downloads
797
Star Rating
5/5
Preview screenshot

NAS Jacksonville Scenery V1.2

This scenery add-on brings NAS Jacksonville KNIP v1.2 to Microsoft Flight Simulator X, refreshing the Florida naval air station with two new GMAX hangars, an updated seawall helicopter apron, detailed P-3 ramp markings, configurable static SH-60 and F/A-18 models, custom photometric lighting and AFCAD-safe terrain polys, tuned for Normal scenery complexity and smooth frame rates.

File Size
3.8 MB
Total Downloads
767
Star Rating
2/5
Screenshots
4
Preview screenshot

Branson Airport Scenery V1

Released for Microsoft Flight Simulator X, this freeware scenery recreates Branson Airport (ICAO BBG, IATA BKG) in Missouri, USA, opened 2009 atop a leveled Ozark ridge; custom terminal, FBO, hangar and ground vehicles sit on a hand-flattened mesa, aligning elevation, terrain mesh and parking for airliner and GA operations, utilizing FSX Object Tool.

File Size
6.02 MB
Total Downloads
765
Screenshots
21
Preview screenshot

Evers International Airport

Covering Medgar Wiley Evers International (KJAN), this FSX add-on renders Jackson, Mississippi’s primary field with a scratch-built terminal, annotated AFCAD gate layout, Air National Guard C-17 apron, cargo ramp, active jetways and fuel truck routes, bringing accurate ground markings and regional airline traffic to your domestic U.S. scenery library.

File Size
1.62 MB
Total Downloads
762
Screenshots
1
Preview screenshot

OZx Grand Canyon Add-Ins

Written for Microsoft Flight Simulator X with Acceleration, this United States listing layers new content onto OzX’s freeware Grand Canyon terrain: rim-edge resort complexes, parking areas, dispersed legal and illegal camps, animated hikers, kayakers and multiple Search-and-Rescue waypoints, boosting low-altitude helicopter sorties around KGCN.

File Size
1.16 MB
Total Downloads
756
Star Rating
5/5
Screenshots
1
Preview screenshot

KMSY

Covering Louisiana’s Louis Armstrong New Orleans International Airport (KMSY), this Alpha India Group AFCAD file refreshes FSX with a scratch-built four-concourse terminal, accurate gate coding, UPS/FedEx freight ramps, optimized taxi and service roads, dual-runway AI operations, apron lighting, clean landclass and parking allocations calibrated for busy Gulf Coast passenger traffic.

File Size
1.52 MB
Total Downloads
740
Star Rating
4/5
Screenshots
1
Preview screenshot

George Bush Intercontinental

George Bush Intercontinental (KIAH) for FSX refreshes Houston’s hub with updated AFCAD via ADE v1.37, optional crosswind-enabled five-runway operations, realigned taxiway geometry, corrected signage, expanded gate coding for AI schedules, service vehicle routes, extra fuel trucks and a functional tower view, giving realistic ground flow for long-haul and regional traffic.

File Size
94.14 KB
Total Downloads
732
Preview screenshot

AFCAD Reno-Tahoe International Airport

FSX Acceleration fliers can load this scenery enhancement for Reno-Tahoe International Airport, KRNO, updating the high-desert Nevada gateway with revised taxiway layout, new Concourse B and C jetway gates, calibrated AI parking, reshaped GA, military and cargo stands, plus the freshly commissioned ILS IAGY on 34L and complete RNAV, GPS, RNP, VOR approach coding through ADE.

File Size
981.33 KB
Total Downloads
693
Screenshots
1
Preview screenshot

MacDill AFB

FSX rendition of MacDill AFB (KMCF) near Tampa Bay refreshes the default United States Air Force base with expanded military-cargo stands, a detailed crash-rescue complex, concrete taxiway network, realistic replacement hangars, helipads, static ground support equipment and vehicle traffic—all using stock Microsoft Flight Simulator X assets for straightforward installation.

File Size
17.31 KB
Total Downloads
669
Star Rating
1/5
Preview screenshot

Shaw AFB

This freeware scenery upgrade for FSX frames Shaw AFB (KSSC) in Sumter, South Carolina with precision-aligned taxiways, additional Military_Combat and Military_Cargo stands supporting AI traffic, relocated hangars, a fire station, static fuel trucks, floodlighting, parked fighters and cargo aircraft, yielding a practical military flight-sim environment that integrates cleanly with stock FSX or terrain enhancements.

File Size
18.73 KB
Total Downloads
646
Star Rating
2/5
Preview screenshot

Brownsville Texas

This freeware airport scenery add-on for Microsoft Flight Simulator X upgrades KBRO Brownsville–South Padre Island International, south Texas, with an interior-modelled terminal, working jetways, the restored 1931 Pan Am building, freight complex, fire station, warehouses, updated AFCAD parking, and an optional C-130 stand, utilising EZ-Scenery, Runway12 and Dan French Core libraries.

File Size
1.3 MB
Total Downloads
632
Star Rating
5/5
Screenshots
1
Preview screenshot

Wichita Mid-Continent Airport

For FSX pilots charting routes across the United States, this Wichita Mid-Continent Airport (KICT) scenery rebuild introduces an ADE-crafted AFCAD, perimeter fencing, diagram-matched taxiways, accurate gate coding, expanded GA stands, and additional terminal objects based on satellite references, aligning closely with current sectional plates.

File Size
173.8 KB
Total Downloads
622
Star Rating
2/5
Screenshots
2
Preview screenshot

Portland International Airport

United States KPDX Portland International scenery upgrade for Microsoft Flight Simulator X enhances the stock airfield with precise gate charts, optional live crosswind runway 3⁄21, overhauled service roads, GA apron helipad, coded parking positions and tower-view vantage, delivering smooth AI traffic handling to Pacific Northwest flight-simulation pilots.

File Size
31.26 KB
Total Downloads
601