Skip to content
Microsoft Flight Simulator 3 min read

Where can I find the Cessna 152 checklist in MSFS 2020?

Adam McEnroe
In short

Find the Cessna 152 checklist in MSFS 2020, open the built-in Checklist panel, follow each phase, and fix missing or incomplete checklist pages.

The default Cessna 152 checklist is built into Microsoft Flight Simulator 2020. Load the aircraft, reveal the in-flight toolbar at the top of the screen, and open Checklist. Choose the relevant phase, such as Before Starting Engine or Landing. For a printable or expanded version, use an aircraft-specific checklist alongside it.

How do I open the Cessna 152 checklist in MSFS 2020?

You can access the interactive checklist once the cockpit has loaded; it is not opened from the World Map or aircraft-selection screen.

  1. Select the default Cessna 152 and choose your departure airport.
  2. Start from a parking position if you want to work through the complete cold-and-dark procedure. A runway start loads the aeroplane with many items already completed.
  3. Reveal the in-flight toolbar by moving the pointer to the top centre of the screen. On Xbox, invoke the toolbar using your configured controller command.
  4. Open Checklist from the toolbar.
  5. Select the required checklist page and work through each item in order.

Where supported, the panel can focus the cockpit camera on the relevant switch or control. Some items can also be completed automatically, although following them manually is better for learning the cockpit.

Why is the checklist missing or already completed?

A runway departure is the most common reason the starting pages appear finished: MSFS 2020 has already configured the aircraft for take-off.

  • No Checklist icon: check the toolbar customisation controls and restore or enable the Checklist panel.
  • No full starting sequence: select a parking stand rather than the runway, then begin the flight with the engine stopped.
  • Different checklist content: confirm that you loaded the default Cessna 152. An Aerobat variant or community aircraft may supply different pages or its own checklist system.
  • Items changing unexpectedly: disable any AI or assistance feature that is operating aircraft controls for you.
  • An item will not register: confirm the control visually, then mark the item manually if the checklist does not recognise a hardware input.

Why does a downloaded checklist not match the cockpit?

Many Cessna checklists were written for a different model year, panel fit or aircraft variant. A mistake we see constantly is using a Cessna 172 checklist for the 152; the fuel controls, carburettor-heat procedure and installed equipment are not interchangeable.

The built-in list is matched to the simulated default aircraft, but it is deliberately concise. It may omit detailed walk-around inspections, equipment-specific checks and procedures that MSFS cannot represent.

Should I use the built-in or a printable Cessna 152 checklist?

The built-in checklist is the best choice when you want interactive guidance and help locating switches. For a second monitor, tablet or printed sheet, our guide to choosing and using MSFS checklist tools explains the practical alternatives.

If your immediate goal is getting the aircraft running from a parking stand, follow our step-by-step Cessna 152 cold-start sequence. It covers the control order and the common reasons the engine cranks but fails to start.

You normally will not find a convenient printable Cessna 152 PDF inside the MSFS 2020 installation folders; the default procedure is presented through the in-game panel. For real-world flying, use the approved documentation for that specific aircraft rather than a simulator checklist.

AI Assistant New

Still stuck? Ask Fly Away

Ask Fly Away is our AI flight-sim assistant. Ask your exact question and get a direct, step-by-step answer in seconds — free to try.

Ask Fly Away Free preview · unlimited for PRO members