Skip to content
General 4 min read

X-Plane 12 vs MSFS 2024: which has the better flight model?

Ian Stephens
In short

Compare X-Plane 12 and MSFS 2024 flight models, including aerodynamics, stalls, ground handling, aircraft quality and which simulator suits you.

X-Plane 12 generally has the better and more consistent core flight model, especially for hand-flying, aerodynamic experimentation and behaviour outside normal cruise. MSFS 2024 can equal or beat it with a well-developed individual aircraft, but quality varies more by aircraft. The implementation matters nearly as much as the simulator engine.

Why does X-Plane 12 usually have the edge?

X-Plane 12 bases its aerodynamics on blade-element calculations applied across the aircraft's lifting and control surfaces. Local airflow, airfoil data, geometry, control deflection, mass and centre of gravity all contribute to the forces calculated during flight.

  • Geometry has a direct effect: Altering a wing, propeller, rotor or control surface can produce a corresponding aerodynamic change without relying entirely on a pre-written performance table.
  • Unusual conditions are handled coherently: Slow flight, slips, high angles of attack and experimental configurations tend to respond as extensions of the same underlying model.
  • Aircraft development is transparent: Plane Maker exposes much of the geometry and data that determine how an aircraft flies, which is useful for experimentation and diagnosis.

That approach does not make every X-Plane aircraft accurate. Incorrect airfoil polars, mass distribution, control geometry, engine data or plugin logic can still produce unrealistic results. Our explanation of how X-Plane's aerodynamic modelling works and where it can go wrong covers that distinction in more detail.

Can MSFS 2024 have the more realistic aircraft?

Yes. A carefully developed MSFS 2024 aircraft can be more faithful to its real counterpart than a weak X-Plane implementation.

MSFS 2024 has a modern surface-based aerodynamic model, with support for detailed airflow, propeller behaviour and computational fluid dynamics features. The catch is that developers decide how completely those tools are used. Aircraft can also be tuned with performance data or custom code, so quality varies considerably between packages.

This matters most with fly-by-wire airliners. Their handling depends heavily on control laws, envelope protection, autopilot behaviour, engine modelling and system logic rather than unrestricted aerodynamics alone. Our comparison of A320 implementations and systems depth shows why the best aircraft package can matter more than the host simulator.

Visual feedback can affect perception too. Detailed terrain, lighting, weather and cockpit animation may make MSFS 2024 feel more convincing, but those features do not prove that lift, drag or inertia are more accurate.

Which simulator is better for each type of flying?

X-Plane 12 holds the clearest advantage for aerodynamic experimentation and manual flying, while aircraft-specific quality decides most airliner and ground-handling comparisons.

Type of flyingLikely winnerReason
Light general aviationX-Plane 12, narrowlyConsistent control response and useful behaviour across slow flight, slips and changing load conditions.
AirlinersAircraft-dependentFlight-control laws, systems and developer tuning usually outweigh differences between the core engines.
HelicoptersX-Plane 12, generallyIts rotor and local airflow calculations suit rotorcraft well, although individual aircraft still vary.
Experimental or unusual aircraftX-Plane 12Geometry-driven modelling makes it better suited to testing unconventional configurations.
Taxiing and ground handlingNo universal winnerTyre friction, landing-gear geometry, wind, surface conditions and aircraft configuration can dominate the result.

For a practical fixed-wing example, our Cessna 172 handling comparison examines training value, control feel and visual cues. Rotorcraft pilots should use the more focused X-Plane 12 and MSFS 2024 helicopter comparison.

How should you compare the flight models fairly?

Compare measured aircraft behaviour under matched conditions rather than judging whichever simulator initially feels more lively.

  1. Calibrate the controls: Remove duplicate axis assignments, check dead zones and use comparable sensitivity curves. A short joystick mapped to full control travel can make either simulator feel excessively twitchy.
  2. Match the aircraft state: Use the same fuel load, payload, centre of gravity, flap configuration and approximate pressure altitude. Weight and balance can change stall speed, trim, rotation and climb performance substantially.
  3. Remove hidden assistance: Disable assisted rudder, automatic trimming and other piloting aids that alter control inputs.
  4. Set calm, repeatable weather: Begin with still air before testing turbulence or crosswinds. Otherwise, atmospheric variation can be mistaken for a physics difference.
  5. Test objective behaviours: Compare trim speed, climb rate, power-off glide, roll response, slow flight, stall entry, stall recovery and landing attitude against reliable aircraft performance data.
  6. Separate physics from presentation: Camera movement, sound, frame-rate instability and control latency can change perceived handling without changing the aerodynamic calculation.

A common mistake is treating heavier controls as evidence of better physics. Most desktop yokes and joysticks represent control position with a centring spring, not the changing aerodynamic forces a pilot feels through real controls. Without suitable force feedback, control feel and flight-model accuracy are separate questions.

Our recommendation: Choose X-Plane 12 if your priority is hand-flying, aircraft design, unusual configurations or consistent aerodynamic behaviour across many conditions. Choose MSFS 2024 if a particular high-quality aircraft is modelled there more accurately, or if visual and atmospheric immersion matters alongside handling. For one specific aircraft, compare the aircraft packages rather than buying solely on the reputation of either simulator's core engine.

AI Assistant New

Still stuck? Ask Fly Away

Ask Fly Away is our AI flight-sim assistant. Ask your exact question and get a direct, step-by-step answer in seconds — free to try.

Ask Fly Away Free preview · unlimited for PRO members