FSX / P3D

FSX Maine IF&W Quest Kodiak

Maine IF&W Quest Kodiak livery brings a believable Maine Inland Fisheries and Wildlife-inspired scheme to the passenger amphibian variant, finished in the agency’s red and black colors with crisp exterior textures. Designed for Microsoft Flight Simulator X and requires the Lionheart Creations Quest Kodiak base aircraft.

5/5 (1) 295 downloads 3.85 MB Scanned clean
Flight Simulator X Prepar3D

Maine IF&W Quest Kodiak. Fictional repaint for Lionheart Creations' Quest Kodiak on a passenger amphibian, based on the real-world Maine Inland Fisheries and Wildlife agency. Textures only. By George V. Trovato.

Screenshot of Maine IF&W Quest Kodiak in the air.

Screenshot of Maine IF&W Quest Kodiak in the air.

Important:
You MUST own and have properly installed the Lionheart Creations Quest Kodiak for this paint to work. This paint was designed for FSX, and has not been tested and will most-likely not work in FS2004 due to the use of DXT5 .DDS textures. If you do not own Lionheart's Kodiak, I'd strongly recommend visiting the Lionheart Creations website for more information about this plane. To learn more about the actual, real-life Quest Kodiak, you may wish to visit the manufacturer's web site.

I am in no way affiliated, employed, or endorsed by Lionheart Creations, just a huge fan of his Kodiak.

Information:
This is a fictional aircraft paint for the real-world Maine Inland Fisheries and Wildlife agency. The colors used are the agency's primary colors (red and black). By request.

Installation:
Copy the "texture.ME_DIFW" folder into your "\SimObjects\Airplanes\Kodiak_Floatplane" folder. To activate this aircraft in FSX, you will need to copy the fltsim.XX section below into the aircraft.cfg file found in the folder listed above, as the next aircraft entry. Remember to change the XX (from the fltsim.XX section below) to the next number in sequence, based on the highest numbered aircraft entry that already exists in your aircraft.cfg file.

For example, if the last aircraft entry in your aircraft.cfg is [fltsim.39], the XX for the [fltsim.XX] section below would need to be replaced with 40 so that it would read [fltsim.40].

To activate this paint:
Browse to your Kodiak_Floatplane folder (found in "\SimObjects\Airplanes\Kodiak_Floatplane") and edit your aircraft.cfg file, using a text editor such as Notepad (Do NOT use Wordpad).

COPY AND PASTE THE CODE BELOW, CHANGING THE 'XX' AS DESCRIBED ABOVE.

[fltsim.XX]
title=Kodiak Float Passenger ME IFW
sim=Kodiak_Floatplane
model=Amphib_Passenger
panel=
sound=
texture=ME_DIFW
kb_checklists=Kodiak_Check
kb_reference=Kodiak_ref
atc_id=N6530
atc_id_color=0xff000000
atc_parking_types=RAMP
ui_manufacturer=Quest Kodiak
ui_type="Passenger Amphibian"
ui_variation="Maine IFW"
description="Wherever you want to go today, the Quest Kodiak can get you there. First introduced by Quest in 2005, the Kodiak was designed to land nearly anywhere, on land or water. Undoubtedly, it has lived up to its creators' intentions. Whether supplies need to be brought to a flooded village in the mountains of Peru, an injured person needs to be flown out from a remote lake in Alaska, or an archeologist wants access to a tiny site in the African desert, the Kodiak has what's needed to do the job."

Screenshot of Maine IF&W Quest Kodiak in low flight.

Screenshot of Maine IF&W Quest Kodiak in low flight.

Ready to download Maine IF&W Quest Kodiak?

Free for all simmers · 3.85 MB · Scanned clean

File information

Filename
kod-me-ifw.zip
File size
3.85 MB
Virus scan
Clean (scanned with ClamAV)
Access
Freeware
Content rating
Everyone

Download speed: Free tier is capped at 0.5 Mbps (this file takes approximately 1 min at the cap). PRO members download at full line speed.

How to install this mod

FSX / P3D add-on
  1. Extract the downloaded archive

    Use 7-Zip (free) or WinRAR to extract the ZIP to a temporary folder. Don't install while still zipped — the simulator can't read inside ZIP files.
  2. Place files per the readme

    Most FSX add-ons go into one of: SimObjects\Airplanes\, Addon Scenery\, Effects\, or Gauges\.
  3. Always read the included readme

    Every mod ships with a readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.

What’s inside this archive

The archive kod-me-ifw.zip has 20 files and directories contained within it.

File Contents

This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.

Filename/Directory File Date File Size
ME_IFW01_150x77.jpg11.25.0913.28 kB
ME_IFW01_150x150.jpg11.25.0914.98 kB
ME_IFW02_300x225.jpg11.25.0929.29 kB
FILE_ID.DIZ11.25.09271 B
READ_ME.txt11.25.094.04 kB
Kodiak_Fuselage_T.dds11.25.094.00 MB
Kodiak_LHWing_t.dds11.25.094.00 MB
Kodiak_Pilot.dds11.25.091.00 MB
Kodiak_RHWing_t.dds11.25.094.00 MB
Kodiak_Seats_t.dds11.25.09256.12 kB
Screenshot1.jpg11.25.0980.58 kB
Screenshot2.jpg11.25.09147.82 kB
Screenshot3.jpg11.25.09179.71 kB
Screenshot4.jpg11.25.0955.18 kB
texture.cfg11.22.09137 B
thumbnail.jpg11.25.0919.66 kB
Thumbs.db11.25.0919.50 kB
ME_IFW01_150x150.gif11.25.0913.42 kB
flyawaysimulation.txt10.29.13959 B
Go to Fly Away Simulation.url01.22.1652 B

0 comments

Be the first to leave a comment on this download.

Leave a comment

No comments yet

Be the first to share your thoughts on this download.

Leave a comment

Replying to

Used only for your Gravatar avatar — never shown publicly or shared.

Minimum 30 characters 0
Your comment is reviewed by a moderator before publication. Spam, abuse and self-promotion are removed.