Learn how to end a flight in MSFS 2020 properly, trigger the logbook screen, quit immediately, and fix a flight that will not complete.
To end a flight in Microsoft Flight Simulator 2020, land, taxi to a parking stand, apply the parking brake, then shut down the engines and main electrical power. The end-of-flight or logbook screen should appear. To stop immediately, open the pause menu and choose to return to the main menu.
How do you finish a normal MSFS 2020 flight?
A normal free flight is finished by parking and putting the aircraft into a shut-down state. Landing alone does not necessarily end the session.
- Land and clear the runway. Vacate onto a taxiway before stopping. If this is the difficult part, follow our step-by-step guidance for landing in MSFS 2020.
- Taxi to parking. Use the gate, ramp or parking position assigned by ATC where applicable. Parking away from an active runway also produces a more reliable completion sequence.
- Stop and secure the aircraft. Bring it to a complete halt and apply the parking brake.
- Shut down the engines. Use the aircraft's cockpit controls: mixture or magnetos in a piston aircraft, or the appropriate fuel and engine controls in a turbine aircraft.
- Turn off the remaining systems. Complete the aircraft's parking checklist, including avionics and main electrical power. Shut down the APU where the aircraft and checklist require it.
- Wait for the completion screen. MSFS 2020 may display the logbook or end-of-flight panel. You can then return to the main menu or continue in the cockpit.
For the phases before shutdown, our full MSFS 2020 flight sequence from departure to parking explains how the whole session fits together.
Can you end a flight immediately without landing?
You can leave any ordinary MSFS 2020 flight through the pause menu without landing or shutting down. On PC, press Esc; on Xbox, use the controller button assigned to the pause menu, then return to the main menu.
This closes the session but does not create a resumable save automatically. If you intend to continue from the same position, use the simulator's save function first; our guide explains how to save and resume an MSFS flight.
Why does the end-of-flight screen not appear?
The automatic screen is not a dependable completion signal with every aircraft and activity. Check the following before assuming the flight is stuck:
- The aircraft must be completely stationary, preferably at a gate, ramp or parking stand.
- Apply the parking brake rather than holding the aircraft with wheel brakes.
- Confirm that every engine has stopped; a running engine or APU can prevent some aircraft from reaching a shut-down state.
- Turn off avionics and main electrical power if merely stopping the engines does not trigger the screen.
- Third-party aircraft with custom system logic may not trigger the standard MSFS panel consistently. Returning to the main menu is still a valid way to end the session.
- Bush trips, landing challenges and other activities have their own completion conditions. Wait for the activity result or leg-complete message before leaving if you want credit.
Does ending the flight save it or update the logbook?
Ending a flight and saving one are separate actions. MSFS 2020 will usually record flight time and detected landings in the logbook, but returning to the main menu does not preserve the exact aircraft state for later continuation.
Activity progress is stricter: quitting before a bush-trip leg, challenge or objective reports completion may forfeit that result. For ordinary free flight, parking and shutting down provides the cleanest ending, but the main-menu method remains available when the automatic screen fails.
Can you get out of the aircraft in MSFS 2020?
MSFS 2020 does not provide a standard on-foot pilot mode for leaving the aircraft. External and drone cameras can move around the parked aeroplane, but changing camera view does not end the flight; use shutdown or the pause menu instead.