Find the X-Plane 12 aircraft carrier, start on the catapult or approach, launch correctly, catch a wire, and fix common carrier problems.
Use X-Plane 12's Special Starts rather than searching for a fixed carrier airport. In New Flight, open the location selector, choose Special Starts, then select Carrier Catshot or Carrier Approach. Load the default F-14, lower its tailhook for landing, and use the catapult or arresting wires on the moving deck.
Where is the aircraft carrier in X-Plane 12?
The built-in carrier is a dynamic vessel, not an airport with an ICAO code or a permanent location you can find through the airport search. The reliable way to reach it is through a carrier-specific start.
- Open New Flight.
- Select a carrier-capable aircraft. X-Plane 12 includes a Grumman F-14; our summary of aircraft supplied with X-Plane 12 explains what is available without downloads.
- Open the location selector and find Special Starts. Its position within the location screen can shift between interface updates.
- Choose Carrier Catshot or Carrier Approach. Start the flight once the appropriate option is selected.
| Special start | What it does | Choose it when |
|---|---|---|
| Carrier Catshot | Places the aircraft on the carrier's launch system | You want to practise deck launches |
| Carrier Approach | Places the aircraft airborne and lined up near the carrier | You want to practise approaches and arrested landings |
If you have already loaded a carrier scenario and lose sight of the ship, open the X-Plane map using the assigned map control, normally M, and look for the vessel symbol nearby. Zoom out carefully, but do not expect the carrier to appear at fixed global coordinates during every ordinary airport flight.
How do I launch from the X-Plane 12 carrier?
A Carrier Catshot start should place a compatible aircraft in the correct position for launch, avoiding the difficult job of aligning its nose gear with the catapult shuttle manually.
- Check the launch configuration. Set take-off flaps and trim, retract the speedbrake, keep the tailhook raised, and configure variable-sweep wings correctly if the aircraft requires it.
- Confirm the aircraft is attached. If it has moved away from the launch point or spawned at an angle, reload the Catshot start instead of trying to taxi back into place.
- Apply take-off power. Hold the aircraft as required by its procedure, then release the brakes. X-Plane should fire the catapult when the aircraft is correctly positioned and compatible.
- Fly away cleanly. Maintain control after leaving the bow, establish a positive climb, then retract the landing gear and flaps in sequence.
Do not assume that every military-looking add-on supports catapult operations. Its flight model must contain the correct carrier attachment and landing-gear definitions. If you want another suitable aircraft, consult our carrier-capable military aircraft recommendations and verify X-Plane 12 compatibility.
How do I land and catch an arresting wire?
Select Carrier Approach, lower the tailhook, and fly a stable naval approach to the angled landing area without making a conventional runway flare.
- Configure early. Extend the landing gear, set landing flaps, lower the tailhook, and put the wings in their landing configuration.
- Fly on-speed angle of attack. Use the aircraft's angle-of-attack indication and the carrier's optical landing aid where available. The correct airspeed changes with aircraft type and weight, so one fixed speed is not suitable for every model.
- Follow the moving deck. Keep correcting for the carrier's motion and align with the angled landing centreline rather than the ship's bow.
- Touch down positively. Aim for the arresting-wire area and do not float over the deck with a long flare.
- Prepare for a bolter. Apply power as the wheels touch and keep flying until the wire has stopped the aircraft. If the hook misses, climb away and try again.
Carrier work exposes poor throttle control and unstable approaches very quickly. Simmers still learning basic controls, trim, views, and command assignment should first use our guide to setting up X-Plane 12 and its beginner training tools.
Why do the catapult or arresting wires not work?
Most failures come from an incompatible aircraft, incorrect positioning, or a tailhook that is visible but not properly defined in the flight model.
| Problem | Likely cause | Fix |
|---|---|---|
| Catapult does not fire | Aircraft is off the shuttle, brakes remain set, or the model lacks carrier support | Reload Carrier Catshot with the default F-14, apply launch power, and release the brakes |
| Hook passes through the wires | Hook is not lowered or is only a visual animation | Confirm the cockpit indication and test the same approach with the default F-14 |
| Aircraft bounces over the wires | Excessive speed, a flare, or an unstable descent | Fly on-speed angle of attack and make a controlled, positive touchdown |
| Carrier cannot be found | A normal airport start was loaded instead of a carrier scenario | Return to New Flight and select one of the carrier Special Starts |
| Controls do not operate the hook | No button or key is assigned, or the add-on uses a custom cockpit control | Use the cockpit handle or search the keyboard and joystick assignments for the hook command |
The quickest diagnostic is to repeat the same start with the stock F-14. If the default aircraft works, the carrier is functioning and the problem lies with the add-on's carrier configuration or control assignments.