Skip to content
X-Plane 6 min read

How do I use Lossless Scaling with X-Plane 12?

Ian Stephens
In short

Set up Lossless Scaling with X-Plane 12 using the right window mode, upscaler, LSFG frame cap and V-Sync settings, plus stutter fixes.

To use Lossless Scaling with X-Plane 12, run the simulator in a window, choose upscaling, LSFG frame generation, or both, set a stable source frame cap, then activate scaling and return to X-Plane during the countdown. Keep native resolution for frame generation alone; lower the source window resolution only for upscaling.

Lossless Scaling is a separate Windows application, not an X-Plane plugin. It captures the simulator window and presents a scaled or frame-generated image on your monitor. It does not provide the same function on macOS or Linux, and it cannot generate frames for a VR headset.

How to configure Lossless Scaling for X-Plane 12

  1. Measure X-Plane's real frame rate. Load a demanding aircraft, airport and weather combination, then use X-Plane's frame-rate display. Frame generation needs a stable source rate; it cannot repair a simulator already lurching between high and low FPS. Our guide to identifying whether X-Plane is CPU- or GPU-limited explains what to adjust first.
  2. Set the monitor refresh rate. In Windows, select the intended monitor and its highest reliable refresh rate. If you use several monitors, put X-Plane on the target display before starting the capture.
  3. Run X-Plane in a window. Select the windowed simulator mode in X-Plane's display settings. Windowed capture is more reliable than exclusive full screen, even when a particular full-screen configuration appears to work.
  4. Choose the source resolution. For LSFG frame generation alone, keep X-Plane at the monitor's native resolution and disable scaling in Lossless Scaling. For upscaling, use a smaller X-Plane window with the same aspect ratio. A 1920 x 1080 source on a 2560 x 1440 display, or 2560 x 1440 on a 3840 x 2160 display, is a sensible first test.
  5. Select an upscaler only if needed. LS1 is a practical starting point when offered. FSR and NIS are alternatives, but their sharpening can make runway markings, thin cockpit lettering and distant scenery shimmer. Do not use a stretched output mode that changes the image's aspect ratio.
  6. Start LSFG at x2. Higher multipliers create more interpolated frames and expose more artefacts. They also require GPU time, so reduce GPU-heavy X-Plane settings if the graphics card is already near full utilisation.
  7. Apply one stable frame cap. Use X-Plane's limiter if available in your build or the graphics driver's limiter, but not several limiters at once. Disable X-Plane V-Sync initially and let Lossless Scaling, variable refresh rate or one driver-level setting control presentation.
  8. Activate scaling. Use the Scale control or the hotkey shown by Lossless Scaling, then return focus to X-Plane during the countdown. Keep the source window visible and do not minimise it.

X-Plane 12 uses Vulkan on Windows, but Lossless Scaling does not replace or reconfigure that renderer; it processes the finished window. See our explanation of X-Plane 12's Vulkan, display and frame-pacing configuration if capture or presentation problems persist.

Should I use upscaling, frame generation, or both?

Use upscaling when native resolution is the GPU bottleneck, and use LSFG when the real frame rate is already stable but motion still looks juddery.

ConfigurationBest useX-Plane resolutionMain compromise
Upscaling onlyGPU-limited at native resolutionBelow nativeSofter instruments and more shimmering
LSFG x2 onlyStable base FPS but uneven-looking motionNativeAdded latency and interpolation artefacts
Upscaling plus LSFGHigher-resolution displays with adequate GPU headroomBelow nativeBoth softness and generated-frame artefacts
NeitherUnstable or very low CPU-limited FPSNative or internally adjustedX-Plane settings must be fixed first

A mistake we see constantly is lowering X-Plane's internal rendering resolution and then applying aggressive external upscaling as well. That double reduction makes glass-cockpit text and taxiway signs difficult to read. Change one scaling stage at a time and compare it against native resolution.

What frame cap should I use with LSFG?

For an exact x2 output target, cap the real frame rate at half the monitor refresh rate: 30 FPS for 60 Hz, 60 FPS for 120 Hz, or 72 FPS for 144 Hz. The general calculation is refresh rate / LSFG multiplier.

That cap is useful only if X-Plane can hold it in demanding conditions. If a 120 Hz system fluctuates between 42 and 60 real FPS, a stable 40 FPS cap producing roughly 80 displayed FPS will usually look better than repeatedly missing a 60 FPS source target. A variable-refresh monitor can present that lower output cleanly.

Do not force V-Sync simultaneously in X-Plane, Lossless Scaling and the graphics driver. Begin with X-Plane V-Sync disabled, then use one presentation method to remove tearing. Nvidia users can check our guidance on frame caps, V-Sync and conflicting driver scaling.

Why does Lossless Scaling stutter or show a black screen?

Most Lossless Scaling problems come from an unstable source frame rate, capture permissions, GPU saturation or conflicting synchronisation settings.

SymptomLikely causeFix
Black screenExclusive full screen, minimised source or mismatched administrator privilegesUse windowed mode, keep X-Plane visible and run both applications at the same privilege level
Scaling appears to do nothingThe source already matches the display resolutionDisable scaling for LSFG-only use, or make the source window smaller for upscaling
High displayed FPS but visible stutterUnstable base FPS, duplicate V-Sync or insufficient GPU headroomLower the source cap, remove duplicate synchronisation and reduce GPU-heavy settings
Output opens on the wrong monitorX-Plane was captured on another displayMove and focus the simulator window before activating scaling
Warped instruments, cursor trails or doubled propellersNormal optical-flow errors from generated framesUse x2, raise the real FPS or disable LSFG for precise hand flying

On hybrid-graphics laptops, assign X-Plane and Lossless Scaling to the same high-performance GPU. If capture still fails, try another capture method offered by the installed Lossless Scaling release and temporarily disable unrelated overlays.

Reduced-resolution upscaling can also expose jagged wing edges, flickering buildings and runway shimmer. Before adding more sharpening, check the appropriate anti-aliasing and shimmering fixes for X-Plane 12.

Does LSFG increase X-Plane's real FPS?

LSFG increases displayed frames, not X-Plane's simulation, flight-model, avionics or control update rate. X-Plane's own FPS counter therefore continues to show the genuine rendered rate, while Lossless Scaling's counter may report the higher generated output.

Upscaling can raise real FPS when the GPU is limited by resolution because X-Plane renders fewer pixels. It offers little benefit when the CPU is holding back scenery, aircraft systems or plugins. Generated frames can make cruising and slow camera movement look smoother, but they do not improve control response and may feel less precise during landings, helicopter flying or aerobatics.

AI Assistant New

Still stuck? Ask Fly Away

Ask Fly Away is our AI flight-sim assistant. Ask your exact question and get a direct, step-by-step answer in seconds — free to try.

Ask Fly Away Free preview · unlimited for PRO members