FSX / P3D scenery

FSX Bathurst Airport Scenery

Bathurst Airport (CZBF) scenery brings New Brunswick, Canada to life in FSX with an improved apron and parking lot sized for three aircraft, ideal for GA hops and stopovers en route to Île de la Madeleine. Surrounding lakes and greenery enhance VFR immersion, and included airport information and charts support realistic planning.

333 downloads 1.85 MB Scanned clean

Canada

Flight Simulator X Prepar3D

Images & Screenshots

4 total

A twin-engine turboprop cargo aircraft with red engine nacelles is parked near fuel tanks and cargo containers on a ramp.

A twin-engine turboprop aircraft with a red maple leaf tail is parked on a ramp near several low airport buildings and vehicles.

A turboprop aircraft with red engines is parked near a hangar, with several small planes and a fuel truck nearby.

A small airport with a single runway sits beside a bay, surrounded by hills and scattered buildings under a cloudy sky.

Bathurst Airport (CZBF). Bathurst Airport is located in beautifull New Brunswick, Canada, a vital place for the province that accomodates multiple single and twin engine or can be a stop over for those wanting to visit Ile de la Madeleine, only few miles northeast of Bathurst. Includes the apron and parking lot. Bare in mind, there is room for three aircraft at the time. Nice scenery around, worth a stop on this beautiful green area surrounded by multiple lakes. Includes the airport information and charts. By Daniel Louvet.

Bathurst Airport Scenery.

I have developped the apron and parking lot. Bare in mind, there is room for 3 A/C at the time. Nice scenery around, worth a stop on this beautifull Green area surrounded by multiple lakes.

Hope you'll enjoy your stop over in Bathurst I have included the airport information and charts.

Feedbacks welcome!
Have fun!

Installation:
Drop the .bgl file in your FSX/Addon scenery/scenery folder.

ONLY!

VFR - Short Fields X Airports also available:
-CZBB Boundary Bay
-CYCD Nanaimo
-CYQQ Comox Valley + Update
-CYCZ Fairmont Hot Springs
-CYBA Banff airfield
-CYAZ Tofino
-CAK3 Delta Heritage Airpark
-CyCW Chilliwack Municipal
-CYYB North Bay
-CYPK Pitt Meadows
-CBQ2 Fort Langley
-CSK8 King George Airpark
-CYXX Abbotsford Intl.
-CCS6 Courtenay (smit field)
-TNCB Flamingo Airport (Bonaire)
-TNCC Willemstad Airport (Curacao)
-TNCA Queen Beatrix Intl. Airport (Aruba)
-LFMQ Le Castellet
-LFMA Aix Les Milles
-LFMI Istres
-TGPZ Lauriston Aerodrome
-TVSU Union Island
-TVSC Canouan Island
-CYFB- Frobisher Bay (Iqualuit)
-CYGR- Ile de la Madeleine

These airports are not designed/updated for A.I traffic yet.

Thanks for your support and all your comments!

Remarks:

USE THIS SCENERY AT YOUR OWN RISK. The author is not responsible in any way for any problems arising from the use of this scenery. This includes, but is not limited to, any hardware and/or software problems. Use this scenery and its related files at your own risk. Feel free to make changes for your own usage. This scenery is strictly freeware and should not be redistributed.

Dan

Bathurst Airport Scenery.

Ready to download Bathurst Airport Scenery?

Free for all simmers · 1.85 MB · Scanned clean

File information

Filename

czbf.zip

File size

1.85 MB

Virus scan

Clean (scanned with ClamAV)

Access

Freeware

Content rating

Everyone

Download speed: Free tier is capped at 0.5 Mbps. PRO members download at full line speed.

This is a freeware file — use is subject to our freeware copyright terms.

How to install this mod

FSX / P3D scenery

Extract the downloaded archive

Use 7-Zip (free) or WinRAR to extract the ZIP to a temporary folder. Don't install while still zipped — the simulator can't read inside ZIP files.
Place scenery in Addon Scenery

Create a folder under FSX\Addon Scenery\ containing scenery and texture sub-folders.
Activate in Scenery Library

In FSX, go to Settings → Scenery Library → Add Area. Higher priority means it overrides lower entries for the same location.
Always read the included readme

Every mod ships with a readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.

Finding the scenery

Use these coordinates to fly directly to this location once the mod is installed.

FSX / Prepar3D coordinates (or generate a flight plan)

47.62970000,-65.73890000

Decimal degrees

47.629700°, -65.738900°

Degrees, minutes, seconds

47° 37' 46.920" N 65° 44' 20.040" W

Launch FSX or Prepar3D and use Flights → Load to open the downloaded .pln file. Your aircraft will be positioned at this location.

What’s inside this archive

The archive czbf.zip has 9 files and directories contained within it.

File Contents

This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.

Filename/Directory	File Date	File Size
CZBF.pdf	08.09.09	121.88 kB
Read me.txt	08.09.09	1.93 kB
2009-8-9_13-36-12-921.jpg	08.09.09	492.42 kB
2009-8-9_13-35-35-224.jpg	08.09.09	513.19 kB
2009-8-9_13-35-52-20.jpg	08.09.09	490.81 kB
Short Fields X.gif	05.14.09	296.02 kB
CZBF.BGL	08.09.09	10.22 kB
flyawaysimulation.txt	10.29.13	959 B
Go to Fly Away Simulation.url	01.22.16	52 B